Mechanical Engineering

Indian Institute of Technology Kanpur

Journal Publications

2022
  1. Kumar, Surendra; Jahan, Kousar; Verma, Abhishek; Agarwal, Manan; and Chandraprakash, Chindam, “Agar-based composite films as effective biodegradable sound absorbers,” ACS SUSTAINABLE CHEMISTRY & ENGINEERING, vol. 10, no. 26, 8242--9253, 2022.
  2. Sharma, Vyom; Chandraprakash, Chindam, “Quasi-superhydrophobic microscale two-dimensional phononic crystals of stainless steel 304,” JOURNAL OF APPLIED PHYSICS, vol. 131, no. 18, 184901, 2022.
  3. Kumar, Santosh; Edachery, Vimal; Velpula, Swamybabu; Govindaraju, Avinash; Choudhury, Sounak K.; Kailas, Satish V., Influence of surface roughness, friction coefficient, and wrap angle on clinching joint strength and its correlation with belt friction phenomenon, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, Vol.236, 2022.
  4. Singh, Manmeet; Bhattacharya, Jishnu; Sharma, Manoj Kumar, Computational prediction of significant efficiency gain through multi-tank modular heat storage for solar thermal systems with variable-temperature input profile (vol 18, 100551, 2020), THERMAL SCIENCE AND ENGINEERING PROGRESS, Vol.29, 2022.
  5. Sharma, Manoj Kumar; Bhattacharya, Jishnu, Finding optimal operating point for advection-cooled concentrated photovoltaic system, SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS, Vol.49, 2022.
  6. Kumar, Jitendra; Dutta, Ashish, Energy optimal motion planning of a 14-DOF biped robot on 3D terrain using a new speed function incorporating biped dynamics and terrain geometry, ROBOTICA, Vol.40, 2022.
  7. Thekkepat, Ananthakrishna Ayankalath; Devadula, Sivasrinivasu; Law, Mohit, Identifying Joint Dynamics in Bolted Cantilevered Systems Under Varying Tightening Torques and Torsional Excitations, JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES, Vol.10, 2022.
  8. Mishra, Bal Krishan; Gupta, Archana; Panigrahi, P. K., Near-wall characteristics of wall-normal jets generated by an annular dielectric-barrier-discharge plasma actuator, PHYSICAL REVIEW FLUIDS, Vol.7, 2022.
  9. Jindal, Puneet; Katiyar, Raunak; Bhattacharya, Jishnu, Evaluation of accuracy for Bernardi equation in estimating heat generation rate for continuous and pulse-discharge protocols in LFP and NMC based Li-ion batteries, APPLIED THERMAL ENGINEERING, Vol.201, 2022.
  10. Shah, Ram Krishna; Khandekar, Sameer, On-demand augmentation in heat transfer of Taylor bubble flows using ferrofluids, APPLIED THERMAL ENGINEERING, Vol.205, 2022.
  11. Prasad, Niraj Kr; Shome, Rajib; Biswas, Gautam; Ghosh, Siddhartha Sankar; Dalal, Amaresh, Transport Behavior of Commercial Anticancer Drug Protein-Bound Paclitaxel (Paclicad) in a Micron-Sized Channel, LANGMUIR, Vol.38, 2022.
  12. Khan, Basheer A.; Saha, Arun K., Turbulent flow and heat transfer characteristics of an impinging jet over a heated wall-mounted cube placed in a cross-flow, PHYSICS OF FLUIDS, Vol.34, 2022.
  13. Patel, Arjun; Talaviya, Devang Kumar; Law, Mohit; Wahi, Pankaj, Optimally tuning an absorber for a chatter-resistant rotating slender milling tool holder, JOURNAL OF SOUND AND VIBRATION, Vol.520, 2022.
  14. Singh, Atinder Pal; Ghoshdastidar, P. S., Computer Simulation of Heat Transfer in Alumina and Cement Rotary Kilns, JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol.14, 2022.
  15. Sekar, Dhileepan; Venkadesan, Gnanamoorthi; Panithasan, Mebin Samuel, Optimisation of dry cell electrolyser and hydroxy gas production to utilise in a diesel engine operated with blends of orange peel oil in dual-fuel mode, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol.47, 2022.
  16. Srinivasan, V; Madanan, U.; Goldstein, R. J., Turbulent Rayleigh-Benard convection of compressed gas: effect of sidewall thermal conductance, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol.182, 2022.
  17. Das, Santanu Kumar; Dalal, Amaresh; Breuer, Michael; Biswas, Gautam, Evolution of jets during drop impact on a deep liquid pool, PHYSICS OF FLUIDS, Vol.34, 2022.
  18. Agarwal, Avinash Kumar; Jiotode, Yeshudas; Sharma, Nikhil, Time-Resolved Endoscopic Evaluation of Spatial Temperature and Soot Distribution in a Butanol-Diesel Blend Fueled Direct Injection Compression Ignition Engine, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.144, 2022.
  19. Agarwal, Avinash Kumar; Singh, Akhilendra Pratap; Kumar, Vikram, Reactivity Controlled Compression Ignition Engine Fueled With Mineral Diesel and Butanol at Varying Premixed Ratios and Loads, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.144, 2022.
  20. Agarwal, Avinash Kumar; Prashumn; Chandra, Krishn, Di-ethyl ether-diesel blends fuelled off-road tractor engine: Part-I: Technical feasibility, FUEL, Vol.308, 2022.
  21. Agarwal, Avinash Kumar; Prashumn; Valera, Hardikk; Mustafi, Nirendra Nath, Di-ethyl ether-diesel blends fuelled off-road tractor engine: Part-II: Unregulated and particulate emission characteristics, FUEL, Vol.308, 2022.
  22. Gupta, Saurabh; De, Santanu; Loha, Chanchal; Karmakar, Malay, Effects of drag and subgrid-scale turbulence modeling on gas-solid hydrodynamics of a pilot-scale circulating fluidized bed, CHEMICAL ENGINEERING SCIENCE, Vol.248, 2022.
  23. Chauhan, Pankaj Singh; Kumar, Kuldeep; Singh, Kirtiman; Bhattacharya, Shantanu, Fast decolorization of rhodamine-B dye using novel V2O5-rGO photocatalyst under solar irradiation, SYNTHETIC METALS, Vol.283, 2022.
  24. Bangari, Raghubeer S.; Yadav, Anshul; Awasthi, Prachi; Sinha, Niraj, Experimental and theoretical analysis of simultaneous removal of methylene blue and tetracycline using boron nitride nanosheets as adsorbent, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, Vol.634, 2022.
  25. Bangari, Raghubeer S.; Yadav, Anshul; Bharadwaj, Jayam; Sinha, Niraj, Boron nitride nanosheets incorporated polyvinylidene fluoride mixed matrix membranes for removal of methylene blue from aqueous stream, JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING, Vol.10, 2022.
  26. Gupta, Shreshtha K.; Palulli, Rahul; Talei, Mohsen; Gordon, Robert L.; Arghode, Vaibhav K., CO modelling of premixed head-on quenching flame in the context of Large-Eddy Simulation, INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, Vol.93, 2022.
  27. Mahata, Avik; Mukhopadhyay, Tanmoy; Zaeem, Mohsen Asle, Modified embedded-atom method interatomic potentials for Al-Cu, Al-Fe and Al-Ni binary alloys: From room temperature to melting point, COMPUTATIONAL MATERIALS SCIENCE, Vol.201, 2022.
  28. Zafar, M. Rashid; Basu, Sumit, Stiffness and toughness of soft, liquid reinforced composites, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, Vol.159, 2022.
  29. Kumar, Prem; Gachake, Mayur; Khandekar, Sameer, Effect of wick oxidation on the thermal performance of a copper-acetone loop heat pipe, APPLIED THERMAL ENGINEERING, Vol.200, 2022.
  30. Chatterjee, Shilpi; Kumar, Indradev; Ghanta, Kartik Chandra; Hens, Abhiram; Biswas, Gautam, Insight into molecular rearrangement of a sessile ionic nanodroplet with applied electric field, CHEMICAL ENGINEERING SCIENCE, Vol.247, 2022.
  31. Singh, Manish; Pandey, Animesh; Gupta, Anurag, Interaction of a defect with the reference curvature of an elastic surface, SOFT MATTER, Vol.18, 2022.
  32. de Moura, Braion B.; Machado, Marcela R.; Mukhopadhyay, Tanmoy; Dey, Sudip, Dynamic and wave propagation analysis of periodic smart beams coupled with resonant shunt circuits: passive property modulation, EUROPEAN PHYSICAL JOURNAL-SPECIAL TOPICS, Vol.231, 2022.
  33. Dwivedi, Raghvendra Kumar; Jain, Vandana; Muralidhar, K., Dynamic contact angle model for resolving low-viscosity droplet oscillations during spreading over a surface with varying wettability, PHYSICAL REVIEW FLUIDS, Vol.7, 2022.
  34. Singh, Raghvendra Pratap; Yadav, Rahul; Muralidhar, Krishnamurthy; Das, Malay K., Effect of confined boundary and mud-layers on depressurization-based gas recovery and land subsidence in hydrate reservoirs, MARINE GEORESOURCES & GEOTECHNOLOGY, Vol.40, 2022.
  35. Sharma, Deepak Kumar; Sikarwar, Basant Singh; Upadhyay, Sumant; Kumar, Ranjit; Avasthi, D. K.; Ranjan, Mukesh; Srivastava, Sanjeev Kumar; Muralidhar, K., Super-Hydrophobic Nanostructured Silica Coating on Aluminum Substrate for Moist Air Condensation, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol.31, 2022.
  36. Sharma, Vyom; Gyanprakash, Maurya D.; Gupta, Prateek; Ramkumar, Janakarajan, Analysis of circuit current in electrochemical micromachining process under the application of different waveforms of pulsed voltage, JOURNAL OF MANUFACTURING PROCESSES, Vol.75, 2022.
  37. Singh, A.; Mukhopadhyay, T.; Adhikari, S.; Bhattacharya, B., Active multi-physical modulation of Poisson's ratios in composite piezoelectric lattices: On-demand sign reversal, COMPOSITE STRUCTURES, Vol.280, 2022.
  38. Sharma, Nikhil; Agarwal, Avinash Kumar, Microscopic spray characteristics of ethanol and methanol blended gasoline in a direct injection spark ignition engine, INTERNATIONAL JOURNAL OF ENGINE RESEARCH, Vol.23, 2022.
  39. Yadav, Anshul; Sinha, Niraj, Nanomaterial-based gas sensors: A review on experimental and theoretical studies, MATERIALS EXPRESS, Vol.12, 2022.
  40. Sreejiti, Vattaparambil Sreedharan; Tiwari, Nachiketa, Design Sensitivity Studies on a Hydroacoustic Projector Using an Experimentally Validated Easy-to-Build Model, ARCHIVES OF ACOUSTICS, Vol.47, 2022.
  41. Rajput, Arun; Ramkumar, J.; Mondal, K., Effect of Vibratory Tip Amplitude on the Erosion Rate of Various Microstructures of High Carbon Steel, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol.31, 2022.
  42. Chattaraj, Sandipan; Basu, Sumit, Coarse-graining strategies for predicting properties of closely related polymer architectures: A case study of PEEK and PEKK, JOURNAL OF MATERIALS RESEARCH, Vol.37, 2022.
  43. Somwanshi, Praveen M.; Cheverda, V. V.; Muralidhar, K.; Khandekar, S.; Kabov, O. A., Understanding vertical coalescence dynamics of liquid drops over a superhydrophobic surface using high-speed orthographic visualization, EXPERIMENTS IN FLUIDS, Vol.63, 2022.
  44. Singh, Gaganpreet; Mishra, Deepak; Ramkumar, Janakarajan; Ramakrishna, Subramanian Anantha, Large area fabrication of single micron features using two-photon polymerization with sub-nanosecond laser, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol.236, 2022.
  45. Sarkar, Shubhabrata; Wahi, Pankaj; Munshi, Prabhat, Super Resolution CT Imaging Using Higher Order Total Variation (HOTV) Technique, IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, Vol.71, 2022.
  46. Rout, Anil Kumar; Nanda, Soumya Ranjan; Sahoo, Niranjan; Kalita, Pankaj; Kulkarni, Vinayak, Soft Computing-A Way Ahead to Recover Heat Flux for Short Duration Experiments, JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol.14, 2022.
  47. Sharma, Manoj Kumar; Bhattacharya, Jishnu, Dependence of spectral factor on angle of incidence for monocrystalline silicon based photovoltaic solar panel, RENEWABLE ENERGY, Vol.184, 2022.
  48. Gowthaman, S.; Tripathi, Pragya; Ariharan, S.; Ramkumar, Janakarajan; Balani, Kantesh, Water attenuation enhances tribological damage resistance in laser peened steel, MATERIALS LETTERS, Vol.308, 2022.
  49. Gupta, Akash K.; Yadav, Rahul; Das, Malay K.; Panigrahi, Pradipta K., Implementation of a multi-layer radiation propagation model for simulation of microwave heating in hydrate reservoirs, INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, Vol.32, 2022.
  50. Katiyar, Shubhi; Dutta, Ashish, Dynamic path planning over CG-Space of 10DOF Rover with static and randomly moving obstacles using RRT* rewiring, ROBOTICA, Vol.40, 2022.
  51. Ojha, Abhilash; Anas, Mohammad; Ranjan, Avishek; Joshi, Pranav; Verma, Mahendra K., Helicity segregation by Ekman pumping in laminar rotating flows with gravity orthogonal to rotation, PHYSICAL REVIEW FLUIDS, Vol.7, 2022.
  52. Bhardwaj, Abhinav; Singh, Gaganpreet; Srivastava, Kumar Vaibhav; Ramkumar, J.; Ramakrishna, S. Anantha, Polarization-Insensitive Optically Transparent Microwave Metamaterial Absorber Using a Complementary Layer, IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, Vol.21, 2022.
  53. Rajput, Arun; Ramkumar, J.; Mondal, K., Cavitation Resistance of a Cr-Mn Stainless Steel, A Mild Steel, and A High-Carbon Steel Based on Rust Protectivity and Corrosion Behavior, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol.31, 2022.
  54. Sharma, Nikhil; Agarwal, Avinash Kumar, Particulate Emission Reduction by Fuel Injection Timing Optimization in a Gasoline Direct Injection Engine, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.144, 2022.
  55. Inturi, Dakshina Murthy; Lovaraju, P.; Tanneeru, Srinivasa Rao; Rathakrishnan, E., Effect of Eccentricity on Co-flow Jet Characteristics, IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF MECHANICAL ENGINEERING, Vol.46, 2022.
  56. Sharma, Rohit; Gupta, Prateek; Singh, Raghuraj, Hypergeometrically Represented Responsive and Reliable Cloud Service Model for Personal and Private Clouds, WIRELESS PERSONAL COMMUNICATIONS, Vol. 125, 2022.
  57. Singh, Raghuraj; Sharma, Rohit; Gupta, Prateek, Resource provisioning optimisation for cloud computing systems serving multi-class requests, INTERNATIONAL JOURNAL OF AD HOC AND UBIQUITOUS COMPUTING, Vol. 40, 2022.
  58. Thangadurai, Murugan; Kundu, Abhishek; Biswas, Gautam, Analysis of shock wave-boundary layer interaction in a shock tube using higher order scheme, COMPUTERS & FLUIDS, Vol. 236, 2022.
  59. Mandal, Vijay; Sharma, Shashank; Singh, Sudhanshu S.; Ramkumar, J., Laser Surface Texturing in Powder Bed Fusion: Numerical Simulation and Experimental Characterization, METALS AND MATERIALS INTERNATIONAL, Vol. 28, 2022.
  60. Varshney, A.; Mondal, K.; Sangal, S., Cold work induced stability of retained austenite at elevated temperature in a medium carbon high silicon steel, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 832, 2022.
  61. Passarella, Linsey S.; Mahajan, Salil; Pal, Anikesh; Norman, Matthew R., Reconstructing High Resolution ESM Data Through a Novel Fast super Resolution convolutional Neural Network (FSRCNN), GEOPHYSICAL RESEARCH LETTERS, Vol. 49, 2022.
  62. Rahaman, A.; Kar, Kamal K., Hierarchical epoxy based composites prepared by chemical vapor deposition of carbon nanocoils on glass fibers, COMPOSITE INTERFACES, Vol. 29, 2022.
  63. Katiyar, Shubhi; Dutta, Ashish, Comparative analysis on path planning of ATR using RRT*, PSO, and modified APF in CG-Space, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 236, 2022.
  64. Katiyar, Shubhi; Dixit, Prakash Mahadeo, Simulation of softening in high pressure torsion process using continuum damage mechanics model, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 236, 2022.
  65. Pratap, Dheeraj; Shah, Ram Krishna; Khandekar, Sameer; Soni, Sanjeev, Photothermal effects in small gold nanorod aggregates for therapeutic applications, APPLIED NANOSCIENCE, Vol. 12, 2022.
  66. Rout, Anil Kumar; Nanda, Soumya Ranjan; Sahoo, Niranjan; Kalita, Pankaj; Kulkarni, Vinayak, Implementation of Soft Computing Technique for Recovery of Impulsive Heat Loads, JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, Vol. 36, 2022.
  67. Gupta, Nitish Kumar; Singh, Gaganpreet; Wanare, Harshawardhan; Ramakrishna, S. Anantha; Srivastava, Kumar Vaibhav; Ramkumar, J., A low-profile consolidated metastructure for multispectral signature management, JOURNAL OF OPTICS, Vol. 24, 2022.
  68. Yadav, Anshul; Patel, Raj Vardhan; Singh, Chandra Prakash; Labhasetwar, Pawan Kumar; Shahi, Vinod Kumar, Experimental study and numerical optimization for removal of methyl orange using polytetrafluoroethylene membranes in vacuum membrane distillation process, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, Vol. 635, 2022.
  69. Tyagi, A.; Kar, K. K., Proliferation of pH-universal oxygen reduction performance by morphology modulation in NiS-N,S doped carbon microflowers, MATERIALS TODAY SUSTAINABILITY, Vol. 17, 2022.
  70. Verma, Kapil Dev; Sinha, Prerna; Ghorai, Manas K.; Kar, Kamal K., Mesoporous electrode from human hair and bio-based gel polymer electrolyte for high-performance supercapacitor, DIAMOND AND RELATED MATERIALS, Vol. 123, 2022.
  71. Kumar, Rajesh; Sahoo, Sumanta; Joanni, Ednan; Singh, Rajesh K.; Tan, Wai Kian; Moshkalev, Stanislav A.; Matsuda, Atsunori; Kar, Kamal K., Heteroatom doping of 2D graphene materials for electromagnetic interference shielding: a review of recent progress, CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES, Vol. 47, 2022.
  72. Sauer, Roger A.; Duong, Thang X.; Mandadapu, Kranthi K., A chemo-mechano-thermodynamical contact theory for adhesion, friction, and (de)bonding reactions, MATHEMATICS AND MECHANICS OF SOLIDS, Vol. 27, 2022.
  73. Khanna, Sourav; Singh, Preeti; Mudgal, Vijay; Newar, Sanjeev; Sharma, Vashi; Becerra, Victor; Reddy, K. S.; Mallick, Tapas K., Novel thermal conductivity enhancing containers for performance enhancement of solar photovoltaics system integrated with phase change material, ENERGY, Vol. 243, 2022.
  74. Fan, Yaohui; Wu, Yifan; Dale, Travis F.; Lakshminarayana, Sukshitha Achar Puttur; Greene, Colin, V; Badwe, Nilesh U.; Aspandiar, Raiyo F.; Blendell, John E.; Subbarayan, Ganesh; Handwerker, Carol A., Influence of Pad Surface Finish on the Microstructure Evolution and Intermetallic Compound Growth in Homogeneous Sn-Bi and Sn-Bi-Ag Solder Interconnects, JOURNAL OF ELECTRONIC MATERIALS, Vol. 50, 2022.
2021
  1. Raina, Deepak; Gora, Sunil; Maheshwari, Dheeraj; Shah, Suril, V, Impact modeling and reactionless control for post-capturing and maneuvering of orbiting objects using a multi-arm space robot, ACTA ASTRONAUTICA, Vol.182, 2021.
  2. Zafar, M. Rashid; Basu, Sumit, Axisymmetric capillary bridges of soft solids with surface elasticity, MECHANICS OF MATERIALS, Vol.155, 2021.
  3. Zafar, M. Rashid; Basu, Sumit, Calibrating surface hyperelastic constitutive models in soft solids, PHYSICAL REVIEW E, Vol.103, 2021.
  4. Kumar, Santosh; Singh, K. K.; Ramkumar, J., The effects of graphene nanoplatelets on the tribological performance of glass fiber-reinforced epoxy composites, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, Vol.235, 2021.
  5. Mariappan, Murugan; Panithasan, Mebin Samuel; Venkadesan, Gnanamoorthi, Pyrolysis plastic oil production and optimisation followed by maximum possible replacement of diesel with bio-oil/methanol blends in a CRDI engine, JOURNAL OF CLEANER PRODUCTION, Vol.312, 2021.
  6. Kumar, Jitendra; Dutta, Ashish, Learning-Based Motion Planning of a 14-DOF Biped Robot on 3D Uneven Terrain Containing a Ditch, INTERNATIONAL JOURNAL OF HUMANOID ROBOTICS, Vol.18, 2021.
  7. Nagendra Reddy, B. V. S.; Saxena, Anupam, Topology Synthesis of a Three-Kink Contact-Aided Compliant Switch, JOURNAL OF MECHANICAL DESIGN, Vol.143, 2021.
  8. Gupta, Archana; Mishra, Bal Krishan; Panigrahi, P. K., Internal and external hydrodynamics of Taylor cone under constant and alternating voltage actuation, PHYSICS OF FLUIDS, Vol.33, 2021.
  9. Mathur, Girijesh; Tiwari, Nachiketa; Chaturvedi, Neha, Numerical and Experimental Studies of Ballistic Compression Process in a Soft Recovery System, JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, Vol.143, 2021.
  10. Tripathi, Aditya; Bej, Nilotpala; Das, Satyabati, Membranes for Carbon Dioxide Separation on a Small Scale: State of Art, Challenges and Applications, JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING, Vol.9, 2021.
  11. Rai, Amit K.; Gupta, Shakti S., Nonlinear vibrations of a thin isotropic circular plate subjected to moving point loads, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol.235, 2021.
  12. Khatik, Vitthal; Nishad, Shyam Sunder; Saxena, Anupam, Comprehending Optimality of Finger Flexor Tendon Pulley System Using Computational Analysis, JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, Vol.143, 2021.
  13. Kumar, Adarsh; Ray, Bahni; Biswas, Gautam, Dynamics of two coaxially rising gas bubbles, PHYSICS OF FLUIDS, Vol.33, 2021.
  14. Deep, Charan; Pratihar, A. K.; Sharma, M. K., Freezing time-temperature behavior and parametric study of cylindrical shaped tylose gel samples: A numerical and experimental study, THERMAL SCIENCE AND ENGINEERING PROGRESS, Vol.24, 2021.
  15. Pradhan, Tapan Kumar; Panigrahi, Pradipta Kumar, Vapor mediated interaction of two condensing droplets, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, Vol.608, 2021.
  16. Erelli, Ramesh; Saha, Arun K., Experimental and Numerical Investigation of Flow and Heat Transfer in Stationary Two-Pass Rectangular Duct (AR=1:2) With Continuous and Broken V-Shaped Ribs, JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol.13, 2021.
  17. Chouhan, Arvind; Aggarwal, Akash; Kumar, Arvind, Role of melt flow dynamics on track surface morphology in the L -PBF additive manufacturing process, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol.178, 2021.
  18. Sonker, Rohit; Dutta, Ashish, Adding Terrain Height to Improve Model Learning for Path Tracking on Uneven Terrain by a Four Wheel Robot, IEEE ROBOTICS AND AUTOMATION LETTERS, Vol.6, 2021.
  19. Behera, Sachidananda; Saha, Arun K., Effect of inlet shear on turbulent flow past a wall-mounted finite-size square cylinder, OCEAN ENGINEERING, Vol.234, 2021.
  20. Yadav, Om Prakash; Vyas, Nalinaksh S., Stick-slips and jerks in an SDOF system with dry friction and clearance, INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, Vol.137, 2021.
  21. Narne, Vijaya Kumar; Sreejith, V. S.; Tiwari, Nachiketa, Long-Term Average Speech Spectra and Dynamic Ranges of 17 Indian Languages, AMERICAN JOURNAL OF AUDIOLOGY, Vol.30, 2021.
  22. Sharma, Basant Lal, A dislocation-dipole in one-dimensional lattice model, PHILOSOPHICAL MAGAZINE, Vol.101, 2021.
  23. Singh, Pradeep; Sarkar, S., Excitation of Shear Layer Due to Surface Roughness Near the Leading Edge: An Experiment, JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, Vol.143, 2021.
  24. Singh, Swati; Saha, Arun K., Numerical study of flow and heat transfer during a high-speed micro-drop impact on thin liquid films, INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, Vol.89, 2021.
  25. Sreejith, V. S.; Tiwari, Nachiketa, Influence of compliance, and effective orifice discharge coefficient on performance of a hydroacoustic projector, APPLIED ACOUSTICS, Vol.177, 2021.
  26. Chouksey, Mayank; Basu, Sumit, Exploration of subsequent yield surfaces through unit cell simulations, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol.219, 2021.
  27. Haider, Nirmal; Saha, Arun K.; Panigrahi, P. K., Enhancement in Film Cooling Effectiveness Using Delta Winglet Pair, JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol.13, 2021.
  28. Sharma, Manoj Kumar; Pratihar, Anil Kumar, Study of Heat Transfer and Freezing Time-Temperature Behavior of Individual Pea Grains by Numerical and Experimental Methods, JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol.13, 2021.
  29. Mimani, A., A point-like enhanced resolution of experimental Aeolian tone using an iterative point-time-reversal-sponge-layer damping technique, MECHANICAL SYSTEMS AND SIGNAL PROCESSING, Vol.151, 2021.
  30. Mishra, Ashish Kumar; Upadhyay, Ram Krishna; Kumar, Arvind, Surface Wear Anisotropy in AlSi10Mg Alloy Sample Fabricated by Selective Laser Melting: Effect of Hatch Style, Scan Rotation and Use of Fresh and Recycled Powder, JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, Vol.143, 2021.
  31. Srivastava, Arpit Kumar; Basu, Sumit, Exploring the performance of a dielectric elastomer generator through numerical simulations, SENSORS AND ACTUATORS A-PHYSICAL, Vol.319, 2021.
  32. Shukla, Digvijay; Panigrahi, Pradipta K., Interaction of vapor cloud and its effect on evaporation from microliter coaxial well, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, Vol.629, 2021.
  33. Patel, Divyansh Singh; Sharma, Vyom; Jain, V. K.; Ramkumar, J., Sustainable Electrochemical Micromachining Using Atomized Electrolyte Flushing, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, Vol.168, 2021.
  34. Das, Debayan; Panigrahi, P. K., Thermal analysis of loop mediated isothermal DNA amplification (LAMP) based point-of-care diagnostic device, APPLIED THERMAL ENGINEERING, Vol.183, 2021.
  35. Kumar, Abhay; Saha, Arun K.; Panigrahi, Pradipta K.; Karn, Ashish, The mechanism of vortex bifurcation vis-a-vis axial switching in rectangular synthetic jets, EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, Vol.86, 2021.
  36. Ghosh, Abhishek; Basu, Sumit, Soft dielectric elastomer tubes in an electric field, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, Vol.150, 2021.
  37. Vallabh, Ajay; Ghoshdastidar, P. S., Numerical Simulation of Heat Transfer in Laminar Natural Convection of Mixed Newtonian-Non-Newtonian and Pure Non-Newtonian Nanofluids in a Square Enclosure, JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol.13, 2021.
  38. Mimani, A.; Singh, R., Anthropogenic noise variation in Indian cities due to the COVID-19 lockdown during March-to-May 2020(a)), JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, Vol.150, 2021.
  39. Orra, Kashfull; Choudhury, Sounak K., Experimental investigation of machining process by micro-textured cutting insert together with magneto-rheological damper, WEAR, Vol.476, 2021.
  40. Jaiswal, Ankush Kumar; Khandekar, Sameer, Drop-on-Drop Impact Dynamics on a Superhydrophobic Surface, LANGMUIR, Vol.37, 2021.
  41. Sharma, Vyom; Patel, Divyansh Singh; Agrawal, Vishal; Jain, V. K.; Ramkumar, J., Investigations into machining accuracy and quality in wire electrochemical micromachining under sinusoidal and triangular voltage pulse condition, JOURNAL OF MANUFACTURING PROCESSES, Vol.62, 2021.
  42. Pandey, Shashank; Pradyumna, S.; Gupta, Shakti Singh, Static and dynamic analyses of functionally graded sandwich skew shell panels, JOURNAL OF SANDWICH STRUCTURES & MATERIALS, Vol.23, 2021.
  43. Gorthi, Srinivas R.; Mondal, Pranab K.; Biswas, Gautam; Sahu, Kirti C., Electro-capillary filling in a microchannel under the influence of magnetic and electric fields, CANADIAN JOURNAL OF CHEMICAL ENGINEERING, Vol.99, 2021.
  44. Mathur, Girijesh; Tiwari, Nachiketa, Simulation and experimental investigation of a ballistic compression soft recovery system, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, Vol.35, 2021.
  45. Agarwal, Avinash Kumar; Agarwal, Deepak, Field-Testing of Biodiesel (B100) and Diesel-Fueled Vehicles: Part 1-No Load and Highway Driving Emissions, and Acceleration Characteristics, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.143, 2021.
  46. Paneerselvam, Purushothaman; Venkadesan, Gnanamoorthi; Panithasan, Mebin Samuel; Alaganathan, Gurusamy; Wierzbicki, Slawomir; Mikulski, Maciej, Evaluating the Influence of Cetane Improver Additives on the Outcomes of a Diesel Engine Characteristics Fueled with Peppermint Oil Diesel Blend, ENERGIES, Vol.14, 2021.
  47. Singh, Akhilendra Pratap; Sharma, Nikhil; Kumar, Vikram; Agarwal, Avinash Kumar, Experimental investigations of mineral diesel/methanol-fueled reactivity controlled compression ignition engine operated at variable engine loads and premixed ratios, INTERNATIONAL JOURNAL OF ENGINE RESEARCH, Vol.22, 2021.
  48. Pandey, Pawan Kumar; Paul, Chandan; Das, Malay K.; Muralidhar, Krishnamurthy, Assessment and visualization of hemodynamic loading in aneurysm sac and neck: Effect of foam insertion, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, Vol.235, 2021.
  49. Agarwal, Avinash Kumar; Agarwal, Deepak, Field-Testing of Biodiesel (B100) and Diesel-Fueled Vehicles: Part 4-Piston Rating, and Fuel Injection Equipment Issues, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.143, 2021.
  50. Agarwal, Avinash Kumar; Agarwal, Deepak, Field-Testing of Biodiesel (B100) and Diesel-Fueled Vehicles: Part 3-Wear Assessment of Liner and Piston Rings, Engine Deposits, and Operational Issues, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.143, 2021.
  51. Sharma, Basant Lal; Basak, Nirupam, Null Lagrangians in Cosserat Elasticity, JOURNAL OF ELASTICITY, Vol.143, 2021.
  52. Jena, Ashutosh; Singh, Harsimran; Agarwal, Avinash Kumar, Effect of swirl ratio on charge convection, temperature stratification, and combustion in gasoline compression ignition engine, PHYSICS OF FLUIDS, Vol.33, 2021.
  53. Prasad, Rajesh Kumar; Agarwal, Avinash Kumar, Effect of hydrogen enrichment of compressed natural gas on combustible limit and flame kernel evolution in a constant volume combustion chamber using laser ignition, FUEL, Vol.302, 2021.
  54. Bhattacharya, Shashwat; Verma, Mahendra K.; Samtaney, Ravi, Prandtl number dependence of the small-scale properties in turbulent Rayleigh-Benard convection, PHYSICAL REVIEW FLUIDS, Vol.6, 2021.
  55. Bhattacharya, Shashwat; Verma, Mahendra K.; Samtaney, Ravi, Revisiting Reynolds and Nusselt numbers in turbulent thermal convection, PHYSICS OF FLUIDS, Vol.33, 2021.
  56. Sengupta, Tapan K.; Roy, Arkadyuti Ghosh; Chakraborty, Ardhendu; Sengupta, Aditi; Sundaram, Prasannabalaji, Thermal control of transonic shock-boundary layer interaction over a natural laminar flow airfoil, PHYSICS OF FLUIDS, Vol.33, 2021.
  57. Tripathi, Varun; Chattopadhyaya, Somnath; Bhadauria, Alok; Sharma, Shubham; Li, Changhe; Pimenov, Danil Yurievich; Giasin, Khaled; Singh, Sunpreet; Gautam, Girish Dutt, An Agile System to Enhance Productivity through a Modified Value Stream Mapping Approach in Industry 4.0: A Novel Approach, SUSTAINABILITY, Vol.13, 2021.
  58. Gupta, Jai Gopal; Agarwal, Avinash Kumar, Engine durability and lubricating oil tribology study of a biodiesel fuelled common rail direct injection medium-duty transportation diesel engine, WEAR, Vol.486, 2021.
  59. Agarwal, Avinash Kumar; Agarwal, Deepak, Field-Testing of Biodiesel (B100) and Diesel-Fueled Vehicles: Part 2-Lubricating Oil Condition Monitoring, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.143, 2021.
  60. Sharma, Vyom; Patel, Divyansh Singh; Gyanprakash, Maurya; Ramkumar, J., On altering the wetting behaviour and corrosion resistance of a large metallic surface area by wire electrochemical texturing, SURFACE & COATINGS TECHNOLOGY, Vol.422, 2021.
  61. Gupta, Saurabh; De, Santanu, Investigation of hydrodynamics and segregation characteristics in a dual fluidized bed using the binary mixture of sand and high-ash coal, ADVANCED POWDER TECHNOLOGY, Vol.32, 2021.
  62. Kundu, Abhishek; Thangadurai, Murugan; Biswas, Gautam, Investigation on shear layer instabilities and generation of vortices during shock wave and boundary layer interaction, COMPUTERS & FLUIDS, Vol.224, 2021.
  63. Gupta, Pulkit; Rajput, Harsh Singh; Law, Mohit, Vision-based modal analysis of cutting tools, CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, Vol.32, 2021.
  64. Gupta, Saurabh; Choudhary, Shikhar; Kumar, Suraj; De, Santanu, Large eddy simulation of biomass gasification in a bubbling fluidized bed based on the multiphase particle-in-cell method, RENEWABLE ENERGY, Vol.163, 2021.
  65. Manoharan, Kapil; Anwar, Mohd Tahir; Bhattacharya, Shantanu, Development of hydrophobic paper substrates using silane and sol-gel based processes and deriving the best coating technique using machine learning strategies, SCIENTIFIC REPORTS, Vol.11, 2021.
  66. Sundriyal, Poonam; Sahu, Megha; Prakash, Om; Bhattacharya, Shantanu, Long-term surface modification of PEEK polymer using plasma and PEG silane treatment, SURFACES AND INTERFACES, Vol.25, 2021.
  67. Ghai, Viney; Chatterjee, Kingshuk; Agnihotri, Prabhat K., Vertically aligned carbon nanotubes-coated aluminium foil as flexible supercapacitor electrode for high power applications, CARBON LETTERS, Vol.31, 2021.
  68. Kole, Madhusree; Khandekar, Sameer, Engineering applications of ferrofluids: A review, JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, Vol.537, 2021.
  69. Aggarwal, Akash; Patel, Sushil; Vinod, A. R.; Kumar, Arvind, An integrated Eulerian-Lagrangian-Eulerian investigation of coaxial gas-powder flow and intensified particle-melt interaction in directed energy deposition process, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol.166, 2021.
  70. Chaitanya, Gembali Sai; Sahu, Kirti Chandra; Biswas, Gautam, A study of two unequal-sized droplets undergoing oblique collision, PHYSICS OF FLUIDS, Vol.33, 2021.
  71. Sampath, Santhakumar; Chaurasiya, Kanhaiya Lal; Aryan, Pouria; Bhattacharya, Bishakh, An innovative approach towards defect detection and localization in gas pipelines using integrated in-line inspection methods, JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING, Vol.90, 2021.
  72. Bhola, Akshay; Sharma, Teena; Verma, Nishchal K., DCNet: Dark Channel Network for single-image dehazing, MACHINE VISION AND APPLICATIONS, Vol.32, 2021.
  73. Faheem, Mohammed; Khan, Aqib; Kumar, Rakesh; Khan, Sher Afghan; Asrar, Waqar; Sapardi, Mohd Azan Mohammed, Experimental investigation of the effect of cross wire on the flow field of elliptic jet, INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, Vol.90, 2021.
  74. Khan, Sanan H.; Khan, Ateeb Ahmad; Husain, Afsar, Effect of fibre orientation on damage resistance of composite laminates, INTERNATIONAL JOURNAL OF CRASHWORTHINESS, Vol.26, 2021.
  75. Roy, A.; Gupta, K. K.; Naskar, S.; Mukhopadhyay, T.; Dey, S., Compound influence of topological defects and heteroatomic inclusions on the mechanical properties of SWCNTs, MATERIALS TODAY COMMUNICATIONS, Vol.26, 2021.
  76. Usmani, Abdullah Y.; Muralidhar, K., Unsteady Hemodynamics in Intracranial Aneurysms With Varying Dome Orientations, JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, Vol.143, 2021.
  77. Mali, Rahul A.; Gupta, T. V. K.; Ramkumar, J., A comprehensive review of free-form surface milling- Advances over a decade, JOURNAL OF MANUFACTURING PROCESSES, Vol.62, 2021.
  78. Sharma, Manoj Kumar; Bhattacharya, Jishnu, Deciding between concentrated and non-concentrated photovoltaic systems via direct comparison of experiment with opto-thermal computation, RENEWABLE ENERGY, Vol.178, 2021.
  79. Singh, Manmeet; Sharma, Manoj Kumar; Bhattacharya, Jishnu, Design methodology of a parabolic trough collector field for maximum annual energy yield, RENEWABLE ENERGY, Vol.177, 2021.
  80. Chatterjee, Shilpi; Hens, Abhiram; Ghanta, Kartik Chandra; Biswas, Gautam, Molecular dynamics study of sessile ionic nanodroplet under external electric field, CHEMICAL ENGINEERING SCIENCE, Vol.229, 2021.
  81. Saroj, Sunil Kumar; Panigrahi, Pradipta Kumar, Magnetophoretic Control of Diamagnetic Particles Inside an Evaporating Droplet, LANGMUIR, Vol.37, 2021.
  82. Roychowdhury, Ayan; Gupta, Anurag, On Structured Surfaces with Defects: Geometry, Strain Incompatibility, Stress Field, and Natural Shapes (vol 131, pg 239, 2018), JOURNAL OF ELASTICITY, Vol.147, 2021.
  83. Pandey, Animesh; Singh, Manish; Gupta, Anurag, Positive disclination in a thin elastic sheet with boundary, PHYSICAL REVIEW E, Vol.104, 2021.
  84. Khan, Basheer A.; Saha, Arun K., Direct numerical simulation of turbulent flow and heat transfer over a heated cube placed in a matrix of unheated cubes, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol.171, 2021.
  85. Borthakur, Manash Pratim; Nath, Binita; Biswas, Gautam, Dynamics of a compound droplet under the combined influence of electric field and shear flow, PHYSICAL REVIEW FLUIDS, Vol.6, 2021.
  86. Jindal, Puneet; Kumar, Banoth Sravan; Bhattacharya, Jishnu, Coupled electrochemical-abuse-heat-transfer model to predict thermal runaway propagation and mitigation strategy for an EV battery module, JOURNAL OF ENERGY STORAGE, Vol.39, 2021.
  87. Kumar, Alok; Zaloznik, Miha; Combeau, Herve; Lesoult, Gerard; Kumar, Arvind, Channel segregation during columnar solidification: Relation between mushy zone instability and mush permeability, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol.164, 2021.
  88. Pandey, Animesh; Gupta, Anurag, Conservation laws for defect fields in non-contractible domains, MECHANICS RESEARCH COMMUNICATIONS, Vol.118, 2021.
  89. Pandey, Pawan Kumar; Das, Malay Kumar, Effect of foam insertion in aneurysm sac on flow structures in parent lumen: relating vortex structures with disturbed shear, PHYSICAL AND ENGINEERING SCIENCES IN MEDICINE, Vol.44, 2021.
  90. Ghosh, Abhishek; Basu, Sumit, Soft dielectric elastomer tubes in an electric field, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, Vol.150, 2021.
  91. Agarwal, Avinash Kumar; Mustafi, Nirendra Nath, Real-world automotive emissions: Monitoring methodologies, and control measures, RENEWABLE & SUSTAINABLE ENERGY REVIEWS, Vol.137, 2021.
  92. Halder, Nirmal; Panigrahi, P. K., Cooling performance of vortex generator, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, Vol.235, 2021.
  93. Pandey, Animesh; Gupta, Anurag, Point Singularities in Incompatible Elasticity, JOURNAL OF ELASTICITY, Vol.147, 2021.
  94. Singh, Gaganpreet; Bhardwaj, Abhinav; Srivastava, Kumar Vaibhav; Ramkumar, J.; Ramakrishna, S. Anantha, Perforated lightweight microwave metamaterial broadband absorber with discontinuous ground plane, APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, Vol.127, 2021.
  95. Orra, Kashfull; Choudhury, Sounak K., Stability analysis in machining process by using adaptive closed-loop feedback control system in turning process, JOURNAL OF VIBRATION AND CONTROL, Vol.27, 2021.
  96. Sahu, G. N.; Jain, P.; Wahi, P.; Law, M., Emulating bistabilities in turning to devise gain tuning strategies to actively damp them using a hardware-in-the-loop simulator, CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, Vol.32, 2021.
  97. Agarwal, Avinash Kumar; Singh, Akhilendra Pratap; Kumar, Vikram, Particulate characteristics of low-temperature combustion (PCCI and RCCI) strategies in single cylinder research engine for developing sustainable and cleaner transportation solution, ENVIRONMENTAL POLLUTION, Vol.284, 2021.
  98. Prasad, Rajesh Kumar; Agarwal, Avinash Kumar, Development and comparative experimental investigations of laser plasma and spark plasma ignited hydrogen enriched compressed natural gas fueled engine, ENERGY, Vol.216, 2021.
  99. Singh, Akhilendra Pratap; Kumar, Vikram; Agarwal, Avinash Kumar, Evaluation of reactivity controlled compression ignition mode combustion engine using mineral diesel/gasoline fuel pair, FUEL, Vol.301, 2021.
  100. Singh, Akhilendra Pratap; Agarwal, Avinash Kumar, Performance and emission characteristics of conventional diesel combustion/partially premixed charge compression ignition combustion mode switching of biodiesel-fueled engine, INTERNATIONAL JOURNAL OF ENGINE RESEARCH, Vol.22, 2021.
  101. Chauhan, Pankaj Singh; Mishra, Aniket; Bhatt, Geeta; Bhattacharya, Shantanu, Enhanced He gas detection by V2O5-noble metal (Au, Ag, and Pd) nanocomposite with temperature dependent n- to p-type transition, MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, Vol.123, 2021.
  102. Punetha, Maneesh; Yadav, Mahesh Kumar; Jain, Samyak; Khandekar, Sameer; Sharma, Pavan K., Thermal-hydraulic test facility for nuclear reactor containment: Engineering design methodology and benchmarking, PROGRESS IN NUCLEAR ENERGY, Vol.138, 2021.
  103. Singh, Gurveer; Kumar, Vishwa Deepak; Chandra, Laltu; Shekhar, R.; Ghoshdastidar, P. S., One-Dimensional Zonal Model for the Unsteady Heat Transfer Analysis in an Open Volumetric Air Receiver, JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol.13, 2021.
  104. Bajpai, Shipra; Nisar, Ambreen; Sharma, Rupesh Kumar; Schwarz, Udo D.; Balani, Kantesh; Datye, Amit, Effect of fictive temperature on tribological properties of Zr44Ti11Cu10Ni10Be25 bulk metallic glasses, WEAR, Vol.486, 2021.
  105. Fentahun, Daniel A.; Tyagi, Alekha; Singh, Sugandha; Sinha, Prerna; Mishra, Amodini; Danayak, Somnath; Kumar, Rajesh; Kar, Kamal K., Tunable optical and electrical properties of p-type Cu2O thin films, JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, Vol.32, 2021.
  106. Gupta, Saurabh; De, Santanu, Numerical investigation of cold flow hydrodynamics in an internally circulating dual fluidized bed for coal gasification, PARTICULATE SCIENCE AND TECHNOLOGY, Vol.39, 2021.
  107. Singh, Surya Pratap; Aggarwal, Akash; Upadhyay, Ram Krishna; Kumar, Arvind, Processing of IN718-SS316L bimetallic-structure using laser powder bed fusion technique, MATERIALS AND MANUFACTURING PROCESSES, Vol.36, 2021.
  108. Tahalyani, Jitendra; Akhtar, M. Jaleel; Kar, Kamal K., Heterolayered Composite of Carbon Nanofibers Sandwiched between Poly(ethylene terephthalate) and Polyurethane for Flexible Electromagnetic Shielding Application, ACS APPLIED NANO MATERIALS, Vol.4, 2021.
  109. Ganvir, Ashish; Markocsan, Nicolaie; Balani, Kantesh; Nagar, Sainyam, Deposition of hydroxyapatite coatings by axial plasma spraying: Influence of feedstock characteristics on coating microstructure, phase content and mechanical properties, JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, Vol.41, 2021.
  110. Mukhopadhyay, T.; Naskar, S.; Chakraborty, S.; Karsh, P. K.; Choudhury, R.; Dey, S., Stochastic Oblique Impact on Composite Laminates: A Concise Review and Characterization of the Essence of Hybrid Machine Learning Algorithms, ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING, Vol.28, 2021.
  111. Kumar, Dhananjay; Valera, Hardikk; Gautam, Anirudh; Agarwal, Avinash Kumar, Simulations of methanol fueled locomotive engine using high pressure co-axial direct injection system, FUEL, Vol.295, 2021.
  112. Basak, Nirupam; Sharma, Basant Lal, Null Lagrangians in linear theories of micropolar type and few other generalizations of elasticity, ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK, Vol.72, 2021.
  113. Shirude, Ashutosh; Vyasarayani, C. P.; Chatterjee, Anindya, Towards design of a nonlinear vibration stabilizer for suppressing single-mode instability, NONLINEAR DYNAMICS, Vol.103, 2021.
  114. Tyagi, Alekha; Penke, Yaswanth K.; Sinha, Prerna; Malik, Iram; Kar, Kamal K.; Ramkumar, Janakarajan; Yokoi, Hiroyuki, ORR performance evaluation of Al-substituted MnFe2O4/reduced graphene oxide nanocomposite, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol.46, 2021.
  115. Maurya, Anamika; Mishra, Lubhani; Chhabra, R. P., Forced convection from a sphere to power-law fluids in a tapered tube, INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, Vol.126, 2021.
  116. Sharma, Meenaxi; Gupta, Shivam; Bhatt, Bidisha; Bhatt, Geeta; Bhattacharya, Shantanu; Khare, Krishnacharya, Anisotropic Motion of Aqueous Drops on Lubricated Chemically Heterogenous Slippery Surfaces, ADVANCED MATERIALS INTERFACES, Vol.8, 2021.
  117. Tyagi, Alekha; Sinha, Prerna; Kar, Kamal K.; Yokoi, Hiroyuki, Acid-directed preparation of micro/mesoporous heteroatom doped defective graphitic carbon as bifunctional electroactive material: Evaluation of trace metal impurity, JOURNAL OF COLLOID AND INTERFACE SCIENCE, Vol.604, 2021.
  118. Kumar, Ravindra; Kar, Kamal K.; Dasgupta, Kinshuk, Enhanced electrical, mechanical, and viscoelastic properties of carbon-carbon composites using carbon nanotubes coated carbon textile as reinforcement, JOURNAL OF COMPOSITE MATERIALS, Vol.55, 2021.
  119. Goel, Vikas; Hazarika, Naba; Kumar, Mayank; Singh, Vikram; Thamban, Navaneeth M.; Tripathi, Sachchida Nand, Variations in Black Carbon concentration and sources during COVID-19 lockdown in Delhi, CHEMOSPHERE, Vol.270, 2021.
  120. Thakur, R. K.; Singh, K. K.; Ramkumar, Janakarajan, Impact of nanoclay filler reinforcement on CFRP composite performance during abrasive water jet machining, MATERIALS AND MANUFACTURING PROCESSES, Vol.36, 2021.
  121. Gupta, K. K.; Mukhopadhyay, T.; Roy, A.; Roy, L.; Dey, S., Sparse machine learning assisted deep computational insights on the mechanical properties of graphene with intrinsic defects and doping, JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, Vol.155, 2021.
  122. Sundaram, Prasannabalaji; Sengupta, Tapan K.; Sengupta, Aditi; Suman, Vajjala K., Multiscale instabilities of Magnus-Robins effect for compressible flow past rotating cylinder, PHYSICS OF FLUIDS, Vol.33, 2021.
  123. Rajput, Arun; Ramkumar, J.; Mondal, K., Effect of pearlitic morphology with varying fineness on the cavitation erosion behavior of eutectoid rail steel, ULTRASONICS SONOCHEMISTRY, Vol.71, 2021.
  124. Mukherji, Debashish; Singh, Manjesh Kumar, Tuning thermal transport in highly cross-linked polymers by bond-induced void engineering, PHYSICAL REVIEW MATERIALS, Vol.5, 2021.
  125. Singh, Lavish K.; Bhadauria, Alok; Laha, Tapas, Understanding the effect of bimodal microstructure on the strength-ductility synergy of Al-CNT nanocomposites, JOURNAL OF MATERIALS SCIENCE, Vol.56, 2021.
  126. Roy, Tania; Agarwal, Avinash Kumar; Sharma, Yogesh Chandra, A cleaner route of biodiesel production from waste frying oil using novel potassium tin oxide catalyst: A smart liquid-waste management, WASTE MANAGEMENT, Vol.135, 2021.
  127. Kumar, Prabhat; Sauer, Roger A.; Saxena, Anupam, On topology optimization of large deformation contact-aided shape morphing compliant mechanisms, MECHANISM AND MACHINE THEORY, Vol.156, 2021.
  128. Selvaraj, Jagan; Mukhopadhyay, Supratik; Kawashita, Luiz F.; Hallett, Stephen R., Modelling delaminations using adaptive cohesive segments with rotations in dynamic explicit analysis, ENGINEERING FRACTURE MECHANICS, Vol.245, 2021.
  129. Rai, Amit K.; Gupta, Shakti S., Nonlinear vibrations of a polar-orthotropic thin circular plate subjected to circularly moving point load, COMPOSITE STRUCTURES, Vol.256, 2021.
  130. Ghosh, Avik; Bhattacharya, Jishnu, A solar regenerated liquid desiccant evaporative cooling system for office building application in hot and humid climate, THERMAL SCIENCE AND ENGINEERING PROGRESS, Vol.22, 2021.
  131. Sonkul, Nikhil A.; Dhage, Gaurav S.; Vyas, Nalinaksh S., Single and Multi-label Fault Classification in rotors from unprocessed multi-sensor data through deep and parallel CNN architectures, EXPERT SYSTEMS WITH APPLICATIONS, Vol.185, 2021.
  132. Srivastava, Rupal; Bhattacharya, Bishakh, Thermoelastic and vibration response analysis of shape memory alloy reinforced active bimorph composites, SMART MATERIALS AND STRUCTURES, Vol.30, 2021.
  133. Bari, Pritam; Kilic, Zekai Murat; Law, Mohit; Wahi, Pankaj, Rapid stability analysis of serrated end mills using graphical-frequency domain methods, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, Vol.171, 2021.
  134. Penke, Yaswanth K.; Yadav, Amit K.; Malik, Iram; Tyagi, Alekha; Ramkumar, Janakarajan; Kar, Kamal K., Insights of arsenic (III/V) adsorption and electrosorption mechanism onto multi synergistic (redox-photoelectrochemical-ROS) aluminum substituted copper ferrite impregnated rGO, CHEMOSPHERE, Vol.267, 2021.
  135. Muhammad; Lim, C. W.; Vyas, N. S., A Novel Application of Multi-Resonant Dissipative Elastic Metahousing for Bearings, ACTA MECHANICA SOLIDA SINICA, Vol.34, 2021.
  136. Patel, Sushil; Reddy, Pradeep; Kumar, Arvind, A methodology to integrate melt pool convection with rapid solidification and undercooling kinetics in laser spot welding, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol.164, 2021.
  137. Srinivasan, Vyas; Rahatgonakar, Asmita M.; Khandekar, Sameer, Hydrodynamics of a completely wetting isolated liquid plug oscillating inside a square capillary tube, INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, Vol.135, 2021.
  138. Surthi, Kiran Kumar; Tyagi, Alekha; Kar, Kamal K.; Janakarajan, Ramkumar, First principle study on lithium-ion diffusion, electronic and electrochemical properties of cobalt doped lithium metal borates, JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, Vol.148, 2021.
  139. Sharma, Basant Lal; Saxena, Prashant, Variational principles of nonlinear magnetoelastostatics and their correspondences, MATHEMATICS AND MECHANICS OF SOLIDS, Vol.26, 2021.
  140. Baishya, Nayan Jyoti; Bhattacharya, Bishakh; Ogai, Harutoshi; Tatsumi, Kohei, Design of an Anti-Slip Mechanism for Wheels of Step Climbing Robots, ACTUATORS, Vol.10, 2021.
  141. Patel, Chetankumar; Hwang, Joonsik; Bae, Choongsik; Agarwal, Avinash Kumar, Regulated, Unregulated, and Particulate Emissions From Biodiesel Blend Fueled Transportation Engine, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.143, 2021.
  142. Singh, Preeti; Khanna, Sourav; Mudgal, Vijay; Newar, Sanjeev; Sharma, Vashi; Sundaram, Senthilarasu; Reddy, K. S.; Mallick, Tapas K.; Becerra, Victor; Hutchinson, David; Radulovic, Jovana; Khusainov, Rinat, Three dimensional analysis of dye-sensitized, perovskite and monocrystalline silicon solar photovoltaic cells under non uniform solar flux, APPLIED THERMAL ENGINEERING, Vol.182, 2021.
  143. Sengupta, Aditi; Samuel, Roshan J.; Sundaram, Prasannabalaji; Sengupta, Tapan K., Role of non-zero bulk viscosity in three-dimensional Rayleigh-Taylor instability: Beyond Stokes' hypothesis, COMPUTERS & FLUIDS, Vol.225, 2021.
  144. Bhat, Mohd Nadeem; Mushtaq, Shuhaib; Mohbe, Manoj, Impact of section thickness on cooling curve morphology, structure and properties of spheroidal graphite cast iron, SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, Vol.46, 2021.
  145. Vaishali; Mukhopadhyay, T.; Kumar, R. R.; Dey, S., Probing the multi-physical probabilistic dynamics of a novel functional class of hybrid composite shells, COMPOSITE STRUCTURES, Vol.262, 2021.
  146. Das, Debayan; Namboodiri, S., Selection of a suitable paper membrane for Loop Mediated Isothermal DNA amplification reaction (LAMP) in a point-of-care diagnostic kit-Experimental and CFD analysis, CHEMICAL ENGINEERING SCIENCE, Vol.229, 2021.
  147. Prasad, Niraj Kr; Shome, Rajib; Biswas, Gautam; Ghosh, Siddhartha Sankar; Dalal, Amaresh, Discerning the self-healing, shear-thinning characteristics and therapeutic efficacy of hydrogel drug carriers migrating through constricted microchannel resembling blood microcapillary, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, Vol.626, 2021.
  148. Jain, Saransh; Cherian, Riya; Nataraja, Nuggehalli P.; Narne, Vijaya Kumar, The Relationship Between Tinnitus Pitch, Audiogram Edge Frequency, and Auditory Stream Segregation Abilities in Individuals With Tinnitus, AMERICAN JOURNAL OF AUDIOLOGY, Vol.30, 2021.
  149. Rajput, Arun; Ramkumar, J.; Mondal, K., Cavitation behavior of various microstructures made from a C-Mn eutectoid steel, WEAR, Vol.486, 2021.
  150. Maurya, Anamika; Tiwari, Naveen; Chhabra, R. P., Buoyancy effects in vertical 2-D and 3-D T-channels on the onset of flow reversal of power-law fluids in the side branch, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol.174, 2021.
  151. Prasad, Rajesh Kumar; Agarwal, Avinash Kumar, Experimental evaluation of laser ignited hydrogen enriched compressed natural gas fueled supercharged engine, FUEL, Vol.289, 2021.
  152. Sharma, Nikhil; Agarwal, Avinash Kumar, Macroscopic spray characteristics of a gasohol fueled GDI injector and impact on engine combustion and particulate morphology, FUEL, Vol.295, 2021.
  153. Sharma, Eshan; De, Santanu; Cleary, Matthew J., LES of a lifted methanol spray flame series using the sparse Lagrangian MMC approach *, PROCEEDINGS OF THE COMBUSTION INSTITUTE, Vol.38, 2021.
  154. Pazhayapisharath, Indira Chenthamara; Sathyanarayana, Sanjana Singh; Narne, Vijaya Kumar, Influence of Alignment Strategies and Consonant Acoustic Features on Laterality Index in Dichotic Testing in Indian Languages, JOURNAL OF THE AMERICAN ACADEMY OF AUDIOLOGY, Vol.32, 2021.
  155. Sharma, Naresh; Kumar, Govind; Garg, Vivek; Mote, Rakesh G.; Gupta, Shilpi, Reconstructive spectrometer using a photonic crystal cavity, OPTICS EXPRESS, Vol.29, 2021.
  156. Dehadrai, Abhinav Ravindra; Sharma, Ishan; Gupta, Shakti S., Three-Dimensional Dynamics of Towed Underslung Systems Using Geometrically Exact Beam Theory, AIAA JOURNAL, Vol.59, 2021.
  157. Tripathi, Pragya; Ramkumar, J.; Balani, K., Microscratching and fretting of electro-co-deposited Cr-based composite coatings with BN, graphene, and diamond reinforcements, JOURNAL OF MATERIALS SCIENCE, Vol.56, 2021.
  158. Patil, Sunil R.; Mohammad, Hashem; Chawda, Vivek; Sinha, Niraj; Singh, Reman Kumar; Qi, Jianqing; Anantram, M. P., Quantum Transport in DNA Heterostructures: Implications for Nanoelectronics, ACS APPLIED NANO MATERIALS, Vol.4, 2021.
  159. Gupta, Saurabh; De, Santanu, Investigation of cold flow hydrodynamics in a dual fluidized bed for gasification of high-ash coal, POWDER TECHNOLOGY, Vol.384, 2021.
  160. Dwivedi, Ankur; Banerjee, Arnab; Adhikari, Sondipon; Bhattacharya, Bishakh, Optimal electromechanical bandgaps in piezo-embedded mechanical metamaterials, INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN, Vol.17, 2021.
  161. Pandiyan, Arunkumar; Uthayakumar, Aarthi; Lim, Chaesung; Ganesan, Vinothkumar; Yu, Wonjong; Das, Amit; Lee, Sanghoon; Tsampas, Mihalis N.; Omar, Shobit; Han, Jeong Woo; Moorthy, Suresh Babu Krishna; Cha, Suk-Won, Validation of defect association energy on modulating oxygen ionic conductivity in low temperature solid oxide fuel Cell (vol 480, 229106, 2020), JOURNAL OF POWER SOURCES, Vol.484, 2021.
  162. Cedik, Jakub; Pexa, Martin; Holubek, Michal; Mrazek, Jaroslav; Valera, Hardikk; Agarwal, Avinash Kumar, Operational Parameters of a Diesel Engine Running on Diesel-Rapeseed Oil-Methanol-Iso-Butanol Blends, ENERGIES, Vol.14, 2021.
  163. Muaz, Muhammed; Khan, Sanan H., Failure mechanics analysis of AISI 4340 steel using finite element modeling of the milling process, JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, Vol., 2021.
  164. Sahu, Govind N.; Law, Mohit; Wahi, Pankaj, Adaptive control to actively damp bistabilities in highly interrupted turning processes using a hardware-in-the-loop simulator, JOURNAL OF VIBRATION AND CONTROL, Vol., 2021.
  165. Panithasan, Mebin Samuel; Venkadesan, Gnanamoorthi, Evaluating the outcomes of a single-cylinder CRDI engine operated by lemon peel oil under the influence of DTBP, rice husk nano additive and water injection, INTERNATIONAL JOURNAL OF ENGINE RESEARCH, Vol., 2021.
  166. Bharti, Omprakash S.; Saha, Arun K.; Das, Malay K., Investigation of the transition of natural convective flow of water in a differentially heated cubic enclosure, EXPERIMENTAL HEAT TRANSFER, Vol., 2021.
  167. Sachan, Deepak; Sharma, Ishan; Muthukumar, T., Indentation of a periodically layered, elastic half-space by a rigid sphere, MATHEMATICS AND MECHANICS OF SOLIDS, Vol., 2021.
  168. Sethi, Durjyodhan; Acharya, Uttam; Kumar, Sanjeev; Shekhar, Shashank; Roy, Barnik Saha, Effect of Reinforcement Particles on Friction Stir Welded Joints with Scarf Configuration: an Approach to Achieve High Strength Joints, SILICON, Vol., 2021.
  169. Gouravaraju, Saipraneeth; Narayan, Jyotindra; Sauer, Roger A.; Gautam, Sachin Singh, A Bayesian regularization-backpropagation neural network model for peeling computations, JOURNAL OF ADHESION, Vol., 2021.
  170. Singh, Akhilendra Pratap; Jena, Ashutosh; Agarwal, Avinash Kumar, Multiple fuel injection strategy for premixed charge compression ignition combustion engine using biodiesel blends, INTERNATIONAL JOURNAL OF ENGINE RESEARCH, Vol., 2021.
  171. Saha, Shalini; Singh, Abhishek Kumar; Chaki, Mriganka Shekhar, Analysis of generated shear wave due to stress discontinuity in a monoclinic layered structure, WAVES IN RANDOM AND COMPLEX MEDIA, Vol., 2021.
  172. Ravesh, Randeep; Ansari, Ayaj A.; Panigrahi, Pradipta K.; Das, Malay K., Effect of surfactant crowding on clathrate hydrate growth, JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY, Vol., 2021.
  173. Breda, Paola; Sharma, Eshan; De, Santanu; Cleary, Matthew J.; Pfitzner, Michael, Coupling the Multiple Mapping Conditioning Mixing Model with Reaction-diffusion Databases in LES of Methane/air Flames, COMBUSTION SCIENCE AND TECHNOLOGY, Vol., 2021.
  174. Singh, Amanpreet; Banerjee, Arnab; Bhattacharya, Bishakh, Waves in elastically coupled sandwich beams: An analytical investigation, MECHANICS RESEARCH COMMUNICATIONS, Vol. 115, 2021.
  175. Shah, Ram Krishna; Drave, Jai Kumar; Khandekar, Sameer, Thermal Transport in Laminar Convective Flow of Ferrofluids in the Presence of External Magnetic Field, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, Vol. 143, 2021.
  176. Maurya, Anamika; Tiwari, Naveen; Chhabra, R. P., Forced Convective Flow of Bingham Plastic Fluids in a Branching Channel With the Effect of T-Channel Branching Angle, JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, Vol. 143, 2021.
  177. Faheem, Mohammed; Khan, Aqib; Kumar, Rakesh; Khan, Sher Afghan; Asrar, Waqar; Sapardi, Azan M., Experimental study on the mean flow characteristics of a supersonic multiple jet configuration, AEROSPACE SCIENCE AND TECHNOLOGY, Vol. 108, 2021.
  178. Tiwari, Sankalp; Vyasarayani, C. P.; Chatterjee, Anindya, Data suggest COVID-19 affected numbers greatly exceeded detected numbers, in four European countries, as per a delayed SEIQR model, SCIENTIFIC REPORTS, Vol. 11, 2021.
  179. Gatapova, Elizaveta Ya; Sahu, Gopinath; Khandekar, Sameer; Hu, Run, Thermal management of high-power LED module with single-phase liquid jet array, APPLIED THERMAL ENGINEERING, Vol. 184, 2021.
  180. Prakash, K. B. V. Satya; Lovaraju, P.; Rathakrishnan, E., Effect of orifice spacing on twin circular parallel compressible jets, INTERNATIONAL JOURNAL OF TURBO & JET-ENGINES, Vol.38, 2021.
  181. Kumar, Ravindra; Kar, Kamal K.; Dasgupta, Kinshuk, Superior electrical, mechanical and viscoelastic properties of CNTscoated carbon textile reinforced phenolic composite forhigh-performancestructural applications, JOURNAL OF APPLIED POLYMER SCIENCE, Vol. 138, 2021.
  182. De, Souradip; Sahoo, Soumya Ranjan; Wahi, Pankaj, A Rendezvous Strategy With R-2 Reachability for Kinematic Agents, IEEE TRANSACTIONS ON AUTOMATIC CONTROL, Vol.66, 2021.
  183. Nandanwar, Anuj; Dhar, Narendra Kumar; Malyshev, Dmitry; Rybak, Larisa; Behera, Laxmidhar, Finite-Time Robust Admissible Consensus Control of Multirobot System Under Dynamic Events, IEEE SYSTEMS JOURNAL, Vol. 15, 2021.
  184. De, Souradip; Sahoo, Soumya Ranjan; Wahi, Pankaj, Tracking Protocol for Network of Double-Integrator Systems With Heterogeneous Time Delays, IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS, Vol. 17, 2021.
  185. Ranjan, Rajesh; Unnikrishnan, S.; Robinet, J. -C.; Gaitonde, Datta, Global transition dynamics of flow in a lid-driven cubical cavity, THEORETICAL AND COMPUTATIONAL FLUID DYNAMICS, Vol. 35, 2021.
  186. Tripathi, Pragya; Ramkumar, Janakarajan; Balani, Kantesh, Synergistic addition of yttria-stabilized zirconia and h-BN/graphene/ diamond restricts multi-scale length wear of Cr-based hybrid coatings, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, Vol. 99, 2021.
  187. Bangari, Raghubeer S.; Yadav, Anshul; Sinha, Niraj, Experimental and theoretical investigations of methyl orange adsorption using boron nitride nanosheets, SOFT MATTER, Vol. 17, 2021.
  188. Liu, Zhaowei; McBride, Andrew; Sharma, Basant Lal; Steinmann, Paul; Saxena, Prashant, Coupled electro-elastic deformation and instabilities of a toroidal membrane, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, Vol. 151, 2021.
  189. Nanda, Soumya Ranjan; Kulkarni, Vinayak; Sahoo, Niranjan; Menezes, Viren, Sensitivity studies of ANFIS based force recovery technique towards prediction of aerodynamic load, FLOW MEASUREMENT AND INSTRUMENTATION, Vol. 80, 2021.
  190. Mukherjee, Mousumi; Gupta, Anurag; Prashant, Amit, A rate-dependent model for sand to predict constitutive response and instability onset, ACTA GEOTECHNICA, Vol. 16, 2021.
  191. Maddipati, Raj; Sengupta, Tapan K.; Sundaram, Prasannabalaji, Relevance of two- and three-dimensional disturbance field explained with linear stability analysis of Orr-Sommerfeld equation by compound matrix method, COMPUTERS & FLUIDS, Vol. 225, 2021.
  192. Fentahun, Daniel A.; Tyagi, Alekha; Kar, Kamal K., Numerically investigating the AZO/Cu2O heterojunction solar cell using ZnO/CdS buffer layer, OPTIK, Vol. 228, 2021.
  193. Nayak, Chinmayee; Ariharan, S.; Kundu, Biswanath; Singh, Sneha; Sivakumar, Sri; Balla, Vamsi Krishna; Balani, Kantesh, Radiation-induced effects on micro-scratch of ultra high molecular weight polyethylene biocomposites, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, Vol. 11, 2021.
  194. Gouravaraju, Saipraneeth; Sauer, Roger A.; Gautam, Sachin Singh, On the presence of a critical detachment angle in gecko spatula peeling-a numerical investigation using an adhesive friction model, JOURNAL OF ADHESION, Vol. 97, 2021.
  195. Tiwari, Sankalp; Vyasarayani, C. P.; Chatterjee, Anindya, Performance limit for base-excited energy harvesting, and comparison with experiments, NONLINEAR DYNAMICS, Vol. 103, 2021.
  196. Sarkar, Shib Sankar; Das, Ankit; Paul, Siddhartha; Mali, Kalyani; Ghosh, Aniruddha; Sarkar, Ram; Kumar, Arvind, Machine learning method to predict and analyse transient temperature in submerged arc welding, MEASUREMENT, Vol. 170, 2021.
  197. Raj, Rishi; Kulkarni, Avinash; Lebrun, Jean-Marie; Jha, Shikhar, Flash sintering: A new frontier in defect physics and materials science, MRS BULLETIN, Vol. 46, 2021.
  198. Kumar, Rajesh; Sahoo, Sumanta; Tan, Wai Kian; Kawamura, Go; Matsuda, Atsunori; Kar, Kamal K., Microwave-assisted thin reduced graphene oxide-cobalt oxide nanoparticles as hybrids for electrode materials in supercapacitor, JOURNAL OF ENERGY STORAGE, Vol. 40, 2021.
  199. Surthi, Kiran Kumar; Kar, Kamal K.; Janakarajan, Ramkumar, Shape depended electrochemical properties of LiNi0.5Co0.5PO4/C composites for high voltage secondary, flexible Li-ion batteries, CHEMICAL ENGINEERING JOURNAL, Vol. 418, 2021.
  200. Kumar, V. R. Sanal; Saravanan, Vignesh; Srinivasan, Vivek; Shankar, S. Ganesh; Mani, Sivabalan; Sankar, Vigneshwaran; Krishnamoorthy, Dhanalakshmi; Natarajan, Deepak; Rafic, Sulthan Ariff Rahman Mohamed; Baskaran, Roshan Vignesh; Chandrasekaran, Nichith; Natarajan, Vishnu; Sukumaran, Ajith; Doddi, Hema Sai Nagaraju; Padmanabhan, Sathyan; Balasubramaniam, Gowtham; Saravanan, A.; Kumar, N. Santhosh; Lenin, C.; Khan, A. Mohamed Imran; Saravanan, M.; Balakrishnan, R.; Balachandru, R.; Murugesan, Mohanraj; Venkatesan, Dharni Vasudhevan; Shanjay, K. E.; Kumar, H. Sujith; Abhilash, N. A.; Ram, D. Aswin; Janardhanan, Vignesh; Krishnaraj, K.; Gunasekaran, Sandeep; Karunakaran, Sabarinath; Vineeshwar, S.; Mariappan, Amrith; Kiridharan, R.; Sabarinathan, R.; Kumar, M. Ajith; Pradeep, Rahul; Thianesh, U. K.; Perumal, M. Rajaram; Eswar, K. S. Sumanth; Rajesh, M., The theoretical prediction of the boundary-layer-blockage and external flow choking at moving aircraft in ground effects, PHYSICS OF FLUIDS, Vol. 33, 2021.
  201. Priyadarshini, Sindhuja; Das, Malay K.; De, Ashoke; Sinha, Rupesh, Numerical Investigation of Coaxial GCH(4)/LOx Combustion at Supercritical Pressures, COMBUSTION SCIENCE AND TECHNOLOGY, Vol. 193, 2021.
  202. Sharma, Debojit; Mahapatra, Subhankar; Garnayak, Subrat; Arghode, Vaibhav K.; Bandopadhyay, Aditya; Dash, S. K.; Reddy, V. Mahendra, Development of the Reduced Chemical Kinetic Mechanism for Combustion of H-2/CO/C-1-C-4 Hydrocarbons, ENERGY & FUELS, Vol. 35, 2021.
  203. Pandey, Manish; Regis, Rommel G.; Datta, Rituparna; Bhattacharya, Bishakh, Surrogate-assisted multi-objective optimization of the dynamic response of a freight wagon fitted with three-piece bogies, INTERNATIONAL JOURNAL OF RAIL TRANSPORTATION, Vol. 9, 2021.
  204. Mishra, Gaurav; Tripathi, S. N.; Saud, T.; Joshi, Manish; Khan, Arshad; Sapra, B. K., Interaction of cesium bound fission product compounds (CsI and CsOH) with abundant inorganic compounds of atmosphere: Effect on hygroscopic growth properties, JOURNAL OF HAZARDOUS MATERIALS, Vol. 418, 2021.
  205. Singh, Gaganpreet; Sharma, Bhawandeep; Bhardwaj, Abhinav; Srivastava, Kumar Vaibhav; Ramkumar, Janakarajan; Ramakrishna, Subramanian Anantha, Wrapping of Curved Surfaces With Conformal Broadband Metamaterial Microwave Absorber, IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, Vol. 20, 2021.
  206. Mishra, Gaurav; Ghosh, Kunal; Dwivedi, Anubhav Kumar; Kumar, Manish; Kumar, Sidyant; Chintalapati, Sudheer; Tripathi, S. N., An application of probability density function for the analysis of PM2.5 concentration during the COVID-19 lockdown period, SCIENCE OF THE TOTAL ENVIRONMENT, Vol. 782, 2021.
  207. Gautam, Alok Sagar; Tripathi, S. N.; Joshi, Abhishek; Mandariya, Anil Kumar; Singh, Karan; Mishra, Gaurav; Kumar, Sanjeev; Ramola, R. C., First surface measurement of variation of Cloud Condensation Nuclei (CCN) concentration over the Pristine Himalayan region of Garhwal, Uttarakhand, India, ATMOSPHERIC ENVIRONMENT, Vol. 246, 2021.
  208. Singh, Indrajeet; George, Suchi Mercy; Tiwari, Ashutosh; Ramkumar, J.; Balani, Kantesh, Influence of laser surface texturing on the wettability and antibacterial properties of metallic, ceramic, and polymeric surfaces, JOURNAL OF MATERIALS RESEARCH, Vol. 36, 2021.
  209. Acharya, Uttam; Yadava, Manasij Kumar; Banik, Abhijit; Saha, Subhash Chandra; Saha Roy, Barnik, Effect of Heat Input on Microstructure and Mechanical Properties of Friction Stir Welded AA6092/17.5 SiCp-T6, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 30, 2021.
  210. Gaurav, Kumar; Banik, Deepayan; Sharma, Ishan; Dutt, Pravir, Granular flow on a rotating and gravitating elliptical body, JOURNAL OF FLUID MECHANICS, Vol. 916, 2021.
  211. Mudgal, Vijay; Singh, Preeti; Khanna, Sourav; Pandey, Chandan; Becerra, Victor; Mallick, Tapas K.; Reddy, K. S., Optimization of a novel Hybrid Wind Bio Battery Solar Photovoltaic System Integrated with Phase Change Material, ENERGIES, Vol. 14, 2021.
  212. Chen, Chaojian; Singh, Manjesh Kumar; Wunderlich, Katrin; Harvey, Sean; Whitfield, Colette J.; Zhou, Zhixuan; Wagner, Manfred; Landfester, Katharina; Lieberwirth, Ingo; Fytas, George; Kremer, Kurt; Mukherji, Debashish; Ng, David Y. W.; Weil, Tanja, Polymer cyclization for the emergence of hierarchical nanostructures, NATURE COMMUNICATIONS, Vol. 12, 2021.
  213. Zou, Z.; Hughes, T. J. R.; Scott, M. A.; Sauer, R. A.; Savitha, E. J., Galerkin formulations of isogeometric shell analysis: Alleviating locking with Greville quadratures and higher-order elements, COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, Vol. 380, 2021.
  214. Kumar, Rajesh; Sahoo, Sumanta; Joanni, Ednan; Singh, Rajesh K.; Tan, Wai Kian; Kar, Kamal K.; Matsuda, Atsunori, Recent progress on carbon-based composite materials for microwave electromagnetic interference shielding, CARBON, Vol. 177, 2021.
  215. Mukhopadhyay, T.; Naskar, S.; Gupta, K. K.; Kumar, R.; Dey, S.; Adhikari, S., Probing the Stochastic Dynamics of Coronaviruses: Machine Learning Assisted Deep Computational Insights with Exploitable Dimensions, ADVANCED THEORY AND SIMULATIONS, Vol. 4, 2021.
  216. Manchanda, Chirag; Kumar, Mayank; Singh, Vikram; Faisal, Mohd; Hazarika, Naba; Shukla, Ashutosh; Lalchandani, Vipul; Goel, Vikas; Thamban, Navaneeth; Ganguly, Dilip; Tripathi, Sachchida Nand, Variation in chemical composition and sources of PM2.5 during the COVID-19 lockdown in Delhi, ENVIRONMENT INTERNATIONAL, Vol. 153, 2021.
  217. Devi, Nitika; Sahoo, Sumanta; Kumar, Rajesh; Singh, Rajesh Kumar, A review of the microwave-assisted synthesis of carbon nanomaterials, metal oxides/hydroxides and their composites for energy storage applications, NANOSCALE, Vol. 13, 2021.
  218. Selvaraj, Jagan; Mukhopadhyay, Supratik; Kawashita, Luiz F.; Hallett, Stephen R., Modelling delaminations using adaptive cohesive segments with rotations in dynamic explicit analysis, ENGINEERING FRACTURE MECHANICS, Vol. 245, 2021.
  219. Singh, A.; Mukhopadhyay, T.; Adhikari, S.; Bhattacharya, B., Voltage-dependent modulation of elastic moduli in lattice metamaterials: Emergence of a programmable state-transition capability, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol. 208, 2021.
  220. Maurya, Anamika; Tiwari, Naveen; Chhabra, R. P., Controlling the flow and heat transfer characteristics of power-law fluids in T-junctions using a rotating cylinder, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol. 163, 2021.
  221. Gupta, Akanksha; Guha, Anirban, Modified Stokes drift due to resonant interactions between surface waves and corrugated sea floor with and without a mean current, PHYSICAL REVIEW FLUIDS, Vol. 6, 2021.
  222. Joshi, Brahmesh Vinayak; Vipin, B.; Ramkumar, Janakarajan; Amit, R. K., Impact of policy instruments on lead-acid battery recycling: A system dynamics approach, RESOURCES CONSERVATION AND RECYCLING, Vol. 169, 2021.
  223. Nandal, Vickey; Hariharan, K.; Sarvesha, R.; Singh, Sudhanshu S.; Huang, E-Wen; Chang, Yao-Jen; Yeh, An-Chou; Neelakantan, Suresh; Jain, Jayant, Aging temperature role on precipitation hardening in a non-equiatomic AlCoCrFeNiTi high-entropy alloy, MATERIALS SCIENCE AND TECHNOLOGY, Vol. 37, 2021.
  224. Sarvesha, R.; Bhagyaraj, J.; Bhagavath, S.; Karagadde, S.; Jain, J.; Singh, S. S., 2D and 3D characteristics of intermetallic particles and their role in fracture response of AZ91 magnesium alloy, MATERIALS CHARACTERIZATION, Vol. 171, 2021.
  225. Choi, Myung-Jin; Sauer, Roger A.; Klinkel, Sven, An isogeometric finite element formulation for geometrically exact Timoshenko beams with extensible directors, COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, Vol. 385, 2021.
  226. Shukla, Ashutosh K.; Lalchandani, Vipul; Bhattu, Deepika; Dave, Jay S.; Rai, Pragati; Thamban, Navaneeth M.; Mishra, Suneeti; Gaddamidi, Sreenivas; Tripathi, Nidhi; Vats, Pawan; Rastogi, Neeraj; Sahu, Lokesh; Ganguly, Dilip; Kumar, Mayank; Singh, Vikram; Gargava, Prashant; Tripathi, Sachchida N., Real-time quantification and source apportionment of fine particulate matter including organics and elements in Delhi during summertime, ATMOSPHERIC ENVIRONMENT, Vol. 261, 2021.
  227. Mergel, Janine C.; Scheibert, Julien; Sauer, Roger A., Contact with coupled adhesion and friction: Computational framework, applications, and new insights, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, Vol. 146, 2021.
  228. Sharma, Bhawna; Thakur, Sourbh; Mamba, Gcina; Prateek; Gupta, Raju Kumar; Gupta, Vijai Kumar; Thakur, Vijay Kumar, Titania modified gum tragacanth based hydrogel nanocomposite for water remediation, JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING, Vol. 9, 2021.
  229. Chaudhary, Jyoti; Thakur, Sourbh; Mamba, Gcina; Prateek; Gupta, Raju Kumar; Thakur, Vijay Kumar, Hydrogel of gelatin in the presence of graphite for the adsorption of dye: Towards the concept for water purification, JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING, Vol. 9, 2021.
  230. Khobragade, Rohini; Saravanan, Govindachetty; Einaga, Hisahiro; Nagashima, Hideo; Shukla, Pravesh; Gupta, Tarun; Agarwal, Avinash Kumar; Labhasetwar, Nitin, Diesel fuel particulate emission control using low-cost catalytic materials, FUEL, Vol. 302, 2021.
  231. Immel, Katharina; Nguyen, Vu-Hieu; Dubory, Arnaud; Flouzat-Lachaniette, Charles-Henri; Sauer, Roger A.; Haiat, Guillaume, Determinants of the primary stability of cementless acetabular cup implants: A 3D finite element study, COMPUTERS IN BIOLOGY AND MEDICINE, Vol. 135, 2021.
  232. De, Souradip; Sahoo, Soumya Ranjan; Wahi, Pankaj, Bounded Consensus Tracking of Heterogeneous Multiagent Systems Under Digraphs With Diverse Communication and Input Delays, IEEE TRANSACTIONS ON CYBERNETICS, Vol. , 2021.
2020
  1. Chaurasiya, Kanhaiya Lal; Bhattacharya, Bishakh; Varma, A. K.; Rastogi, Sarthak, Dynamic modeling of a cabin pressure control system, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, Vol.234, 2020.
  2. Afzal, Arshad; Chung, Heeyoon; Muralidhar, Krishnamurthy; Cho, Hyung Hee, Neural-Network-Assisted Optimization of Rectangular Channels with Intersecting Ribs for Enhanced Thermal Performance, HEAT TRANSFER ENGINEERING, Vol.41, 2020.
  3. Nagdeve, Leeladhar; Jain, V. K.; Ramkumar, J., Optimization of process parameters in nano-finishing of Co-Cr-Mo alloy knee joint, MATERIALS AND MANUFACTURING PROCESSES, Vol.35, 2020.
  4. Singh, Manmeet; Sharma, Manoj Kumar; Bhattacharya, Jishnu, Computational prediction of significant efficiency gain through multi-tank modular heat storage for solar thermal systems with variable-temperature input profile, THERMAL SCIENCE AND ENGINEERING PROGRESS, Vol.18, 2020.
  5. Pandey, Vinod; Deka, Hiranya; Biswas, Gautam; Dalal, Amaresh, Dynamics of Growth and Breakup of an Evaporating Pendant Drop, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, Vol.142, 2020.
  6. Jain, Ajay Kumar; Sharma, Arun Kumar; Khandekar, Sameer; Bhattacharya, Bishakh, Shape Memory Alloy-Based Sensor for Two-Phase Flow Detection, IEEE SENSORS JOURNAL, Vol.20, 2020.
  7. Sharma, Manoj Kumar; Bhattacharya, Jishnu, A novel stationary concentrator to enhance solar intensity with absorber-only single axis tracking, RENEWABLE ENERGY, Vol.154, 2020.
  8. Ramu, Nalla; Ghoshdastidar, P. S., Computer Simulation of Mixed Convection of Alumina-Deionized Water Nanofluid Over Four In-Line Electronic Chips Embedded in One Wall of a Vertical Rectangular Channel, JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol.12, 2020.
  9. Maurya, Gaurav; Sharma, Basant Lal, Wave scattering on lattice structures involving an array of cracks, PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, Vol.476, 2020.
  10. Kumar, Santosh; Singh, Kalyan K.; Ramkumar, Janakarajan, Comparative study of the influence of graphene nanoplatelets filler on the mechanical and tribological behavior of glass fabric-reinforced epoxy composites, POLYMER COMPOSITES, Vol.41, 2020.
  11. Yadav, Rahul; Tripathi, Swapnil; Asati, Shailendra; Das, Malay K., A combined neural network and simulated annealing based inverse technique to optimize the heat source control parameters in heat treatment furnaces, INVERSE PROBLEMS IN SCIENCE AND ENGINEERING, Vol.28, 2020.
  12. Agarwal, Naman; Raj, Manish; Bhattacharya, Jishnu, Solar tower on an uneven terrain: methodology and case study, RENEWABLE ENERGY, Vol.161, 2020.
  13. Sharma, Basant Lal; Maurya, Gaurav, Discrete scattering by a pair of parallel defects, PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, Vol.378, 2020.
  14. Gupta, Archana; Panigrahi, P. K., Alternating current coaxial electrospray for micro-encapsulation, EXPERIMENTS IN FLUIDS, Vol.61, 2020.
  15. Chandran, Krishna; Muralidhar, Krishnamurthy, A switching ILU(0)-SGS preconditioner for matrix systems of incompressible flow and heat transfer using condition number estimates, PROGRESS IN COMPUTATIONAL FLUID DYNAMICS, Vol.20, 2020.
  16. Gorthi, Srinivas R.; Meher, Sanjaya Kumar; Biswas, Gautam; Mondal, Pranab Kumar, Capillary imbibition of non-Newtonian fluids in a microfluidic channel: analysis and experiments, PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, Vol.476, 2020.
  17. Sharma, Basant Lal, Discrete scattering by two staggered semi-infinite defects: reduction of matrix Wiener-Hopf problem, JOURNAL OF ENGINEERING MATHEMATICS, Vol.123, 2020.
  18. Jindal, Puneet; Bhattacharya, Jishnu, Criticality of incorporating explicit in-situ measurement of temperature-dependent heat generation for accurate design of thermal management system for Li-ion battery pack, INTERNATIONAL JOURNAL OF ENERGY RESEARCH, Vol.44, 2020.
  19. Sarkar, S., Flow structures and thermal field with modulated jet near the semi-circular leading edge, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, Vol.234, 2020.
  20. Mandal, Saptarshi; Ghoshdastidar, P. S., Laminar Forced Convection of Nanofluids in a Circular Tube: A New Nonhomogeneous Flow Model, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, Vol.142, 2020.
  21. Roychowdhury, Ayan; Gupta, Anurag, Growth and Non-Metricity in Foppl-von Karman Shells, JOURNAL OF ELASTICITY, Vol.140, 2020.
  22. Srivastava, Arpit Kumar; Basu, Sumit, Mechanics of reversible wrinkling in a soft dielectric elastomer, PHYSICAL REVIEW E, Vol.101, 2020.
  23. Upadhyay, Ram Krishna; Kumar, Arvind, Scratch and wear resistance of additive manufactured 316L stainless steel sample fabricated by laser powder bed fusion technique, WEAR, Vol.458, 2020.
  24. Chouhan, Arvind; Aggarwal, Akash; Kumar, Arvind, Microscale Analysis of Melt Pool Dynamics Due To Particle Impingement and Laser-Matter Interaction in the Spot Laser Metal Deposition Process, JOM, Vol.72, 2020.
  25. Santra, Somnath; Panigrahi, Devi Prasad; Das, Sayan; Chakraborty, Suman, Shape evolution of compound droplet in combined presence of electric field and extensional flow, PHYSICAL REVIEW FLUIDS, Vol.5, 2020.
  26. Joshi, Tushar; Arora, Rajat; Basak, Anup; Gupta, Anurag, Equilibrium shape of misfitting precipitates with anisotropic elasticity and anisotropic interfacial energy, MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, Vol.28, 2020.
  27. Law, M.; Karthik, R.; Sharma, S.; Ramkumar, J., Finish turning of hardened bearing steel using textured PcBN tools, JOURNAL OF MANUFACTURING PROCESSES, Vol.60, 2020.
  28. Chouhan, Arvind; Aggarwal, Akash; Kumar, Arvind, A computational study of porosity formation mechanism, flow characteristics and solidification microstructure in the L-DED process, APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, Vol.126, 2020.
  29. Behera, Sachidananda; Saha, Arun K., Evolution of the flow structures in an elevated jet in crossflow, PHYSICS OF FLUIDS, Vol.32, 2020.
  30. Singh, Digvijay; Kumar, Arvind, Numerical and experimental analysis of rapid solidification considering undercooling effect during water droplet impact on a substrate, THERMAL SCIENCE AND ENGINEERING PROGRESS, Vol.20, 2020.
  31. Somwanshi, Praveen M.; Muralidhar, K.; Khandekar, Sameer, Coalescence of vertically aligned drops over a superhydrophobic surface, PHYSICS OF FLUIDS, Vol.32, 2020.
  32. Kumar, A.; Saha, A. K.; Panigrahi, P. K.; Karn, A., Implications of Velocity Ratio on the Characteristics of a Circular Synthetic Jet Flush Mounted on a Torpedo Model in Quiescent and Cross-Flow Conditions, JOURNAL OF APPLIED FLUID MECHANICS, Vol.13, 2020.
  33. Bari, Pritam; Law, Mohit; Wahi, Pankaj, Geometric models of non-standard serrated end mills, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.111, 2020.
  34. Bhandari, Ajay; Bansal, Ankit; Sinha, Niraj, Effect of aging on heat transfer, fluid flow and drug transport in anterior human eye: A computational study, JOURNAL OF CONTROLLED RELEASE, Vol.328, 2020.
  35. Singh, Akhilendra Pratap; Sharma, Nikhil; Kumar, Vikram; Satsangi, Dev Prakash; Agarwal, Avinash Kumar, Fuel Injection Strategy for Utilization of Mineral Diesel-Methanol Blend in a Common Rail Direct Injection Engine, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.142, 2020.
  36. Singh, Akhilendra Pratap; Kumar, Dhananjay; Agarwal, Avinash Kumar, Particulate characteristics of laser ignited hydrogen enriched compressed natural gas engine, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol.45, 2020.
  37. Chandran, Krishna; Dalal, Indranil Saha; Tatsumi, Kazuya; Muralidhar, Krishnamurthy, Numerical simulation of blood flow modeled as a fluid- particulate mixture, JOURNAL OF NON-NEWTONIAN FLUID MECHANICS, Vol.285, 2020.
  38. Patel, Divyansh Singh; Sharma, Vyom; Jain, Vijay Kumar; Ramkumar, Janakarajan, Reducing overcut in electrochemical micromachining process by altering the energy of voltage pulse using sinusoidal and triangular waveform, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, Vol.151, 2020.
  39. Shirsath, Ganesh B.; Muralidhar, K.; Pala, Raj Ganesh S., Variable air gap membrane distillation for hybrid solar desalination, JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING, Vol.8, 2020.
  40. Singh, Akhilendra Pratap; Agarwal, Avinash Kumar, Split Injection Strategies for Biodiesel-Fueled Premixed Charge Compression Ignition Combustion Engine-Part I: Combustion, Performance, and Emission Studies, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.142, 2020.
  41. Kumar, Vikram; Pratap, Akhilendra; Agarwal, Avinash Kumar, Gaseous emissions (regulated and unregulated) and particulate characteristics of a medium-duty CRDI transportation diesel engine fueled with diesel-alcohol blends, FUEL, Vol.278, 2020.
  42. Sharma, Nikhil; Agarwal, Avinash Kumar, Effect of Fuel Injection Pressure and Engine Speed on Performance, Emissions, Combustion, and Particulate Investigations of Gasohols Fuelled Gasoline Direct Injection Engine, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.142, 2020.
  43. Patel, Chetankumar; Hwang, Joonsik; Bae, Choongsik; Agarwal, Rashmi A.; Agarwal, Avinash Kumar, Microscopic Spray Characteristics of Biodiesels Derived From Karanja, Jatropha, and Waste Cooking Oils, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.142, 2020.
  44. Sharma, Nikhil; Agarwal, Avinash Kumar, Particulate Morphology Characterization of Butanol-Gasoline Blend Fueled Spark-Ignition Direct Injection Engine, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.142, 2020.
  45. Sharma, Vyom; Patel, Divyansh Singh; Jain, V. K.; Ramkumar, J., Wire electrochemical micromachining: An overview, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, Vol.155, 2020.
  46. Gowthaman, S.; Jagadeesha, T.; Neetu, Effect of severe plastic deformation through machining on the microstructure and corrosion behavior of end milled nimonic 263 alloy, MATERIALS LETTERS, Vol.275, 2020.
  47. Gupta, Vivek; Adhikari, Sondipon; Bhattacharya, Bishakh, Exploring the dynamics of hourglass shaped lattice metastructures, SCIENTIFIC REPORTS, Vol.10, 2020.
  48. Sharma, Arun Kumar; Datta, Rituparna; Agarwal, Shubham; Bhattacharya, Bishakh, Displacement transmissibility based system identification for polydimethylsiloxane integrating a combination of mechanical modelling with evolutionary multi-objective optimization, ENGINEERING OPTIMIZATION, Vol.52, 2020.
  49. Dwivedi, Ankur; Banerjee, Arnab; Bhattacharya, Bishakh, Simultaneous energy harvesting and vibration attenuation in piezo-embedded negative stiffness metamaterial, JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol.31, 2020.
  50. Mukhopadhyay, Supratik; Hallett, Stephen R., An augmented cohesive element for coarse meshes in delamination analysis of composites, COMPOSITE STRUCTURES, Vol.254, 2020.
  51. Aggarwal, Ishu; Paul, Saptarshi; Sinha, Nishant K.; Basu, Sumit, Molecular dynamics studies on the strength and ductility of symmetric thermally welded joints, MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, Vol.28, 2020.
  52. Bhaskar, Jitendra; Kumar Sharma, Arun; Bhattacharya, Bishakh; Adhikari, Sondipon, A review on shape memory alloy reinforced polymer composite materials and structures, SMART MATERIALS AND STRUCTURES, Vol.29, 2020.
  53. Baghel, Vishakha; Sikarwar, Basant Singh; Muralidhar, K., Dropwise condensation from moist air over a hydrophobic metallic substrate, APPLIED THERMAL ENGINEERING, Vol.181, 2020.
  54. Sundriyal, Poonam; Pandey, Mohit; Bhattacharya, Shantanu, Plasma-assisted surface alteration of industrial polymers for improved adhesive bonding, INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, Vol.101, 2020.
  55. Vardhaman, B. S. Ajay; Amarnath, M.; Ramkumar, J.; Mondal, K., Enhanced tribological performances of zinc oxide/MWCNTs hybrid nanomaterials as the effective lubricant additive in engine oil, MATERIALS CHEMISTRY AND PHYSICS, Vol.253, 2020.
  56. Bhattacharjee, Arindam; Chatterjee, Anindya, Restitution modeling in vibration-dominated impacts using energy minimization under outward constraints, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol.166, 2020.
  57. Gupta, Pulkit; Law, Mohit; Mukhopadhyay, Suparno, Evaluating tool point dynamics using output-only modal analysis with mass-change methods, CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, Vol.31, 2020.
  58. Sarkar, Shib Sankar; Das, Ankit; Paul, Siddhartha; Ghosh, Aniruddha; Mali, Kalyani; Sarkar, Ram; Kumar, Arvind, Infrared imaging based machine vision system to determine transient shape of isotherms in submerged arc welding, INFRARED PHYSICS & TECHNOLOGY, Vol.109, 2020.
  59. Tiwari, Sankalp; Chatterjee, Anindya, Basis functions for residual stresses, APPLIED MATHEMATICS AND COMPUTATION, Vol.386, 2020.
  60. Bharti, Omprakash S.; Rajan, Devesh; Saha, Arun K.; Das, Malay K., Simultaneous Estimation of Pr and Ra in a Natural Convective Flow Using Inverse Technique, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, Vol.142, 2020.
  61. Lokanathan, Manojkumar; Sharma, Himanshu; Shabaka, Mostafa; Mohanty, Kishore; Bahadur, Vaibhav, Comparing electrowettability and surfactants as tools for wettability enhancement on a hydrophobic surface, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, Vol.585, 2020.
  62. Chakraborty, Samarshi; Panigrahi, Pradipta Kumar, Stability of nanofluid: A review, APPLIED THERMAL ENGINEERING, Vol.174, 2020.
  63. Saroj, Sunil Kumar; Panigrahi, Pradipta Kumar, Magnetic suppression of the coffee ring effect, JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, Vol.513, 2020.
  64. Sachan, Deepak; Sharma, Ishan; Muthukumar, T., Indentation of a Periodically Layered, Planar, Elastic Half-Space, JOURNAL OF ELASTICITY, Vol.141, 2020.
  65. Das, Debayan; Panigrahi, P. K., CFD simulations for paper-based DNA amplification reaction (LAMP) of Mycobacterium tuberculosis-point-of-care diagnostic perspective, MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING, Vol.58, 2020.
  66. Keerthi, M. C.; Kushari, Abhijit, Spanwise Variations in Aerodynamic Damping of an Oscillating Annular Compressor Cascade, JOURNAL OF PROPULSION AND POWER, Vol.36, 2020.
  67. Chintapalli, Naveenswamy; Sharma, Manoj Kumar; Bhattacharya, Jishnu, Linking spectral, thermal and weather effects to predict location-specific deviation from the rated power of a PV panel, SOLAR ENERGY, Vol.208, 2020.
  68. Shukla, Digvijay; Panigarhi, Pradipta K., Digital holographic interferometry investigation of liquid hydrocarbon vapor cloud above a circular well, APPLIED OPTICS, Vol.59, 2020.
  69. Sharma, Sumit; Setia, Prince; Chandra, Rakesh; Thakur, Nitin, Experimental and molecular dynamics study of boron nitride nanotube-reinforced polymethyl methacrylate composites, JOURNAL OF COMPOSITE MATERIALS, Vol.54, 2020.
  70. Bangari, Raghubeer S.; Yadav, Vivek K.; Singh, Jayant K.; Sinha, Niraj, Fe3O4-Functionalized Boron Nitride Nanosheets as Novel Adsorbents for Removal of Arsenic(III) from Contaminated Water, ACS OMEGA, Vol.5, 2020.
  71. Gupta, Prashant Kumar; Bhandari, Arihant; Bhattacharya, Jishnu; Pala, Raj Ganesh S., Higher voltage, wider voltage plateau, longer cycle life, and faster kinetics via thermally modulated interfaces between Ramsdellite and Pyrolusite MnO2 for lithium-ion battery cathodes, JOURNAL OF POWER SOURCES, Vol.450, 2020.
  72. Yadav, Deepak Kumar; Gupta, Amitava; Munshi, Prabhat, Design of NDI-SMC based robust hybrid nonlinear controller for load following operation in pressurized water reactor, NUCLEAR ENGINEERING AND DESIGN, Vol.363, 2020.
  73. Lasrado, Dylan; Ahankari, Sandeep; Kar, Kamal, Nanocellulose-based polymer composites for energy applications-A review, JOURNAL OF APPLIED POLYMER SCIENCE, Vol.137, 2020.
  74. Mishra, Bal Krishan; Panigrahi, P. K., Flow field induced by a dielectric barrier discharge plasma actuator analyzed with bi-orthogonal decomposition, PHYSICS OF FLUIDS, Vol.32, 2020.
  75. Singh, Mahavir; Saxena, Prakhar; Ramkumar, J.; Rao, R., V, Multi-spark numerical simulation of the micro-EDM process: an extension of a single-spark numerical study, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.108, 2020.
  76. Yadav, Om Prakash; Balaga, Sanjay Raghav; Vyas, Nalinaksh S., Forced vibrations of a spring-dashpot mechanism with dry friction and backlash, INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, Vol.124, 2020.
  77. Singh, Raghvendra Pratap; Shekhawat, Karanpal Singh; Das, Malay K.; Muralidhar, Krishnamurthy, Geological sequestration of CO2)in a water-bearing reservoir in hydrate-forming conditions, OIL & GAS SCIENCE AND TECHNOLOGY-REVUE D IFP ENERGIES NOUVELLES, Vol.75, 2020.
  78. Bangari, Raghubeer S.; Sinha, Niraj, Synthesis of High Surface Area Boron Nitride Nanosheets for the Removal of Methylene Blue and Rhodamine B Dyes from Contaminated Water, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, Vol.20, 2020.
  79. Kharbanda, Jagtej Singh; Yadav, Sateesh Kumar; Soni, Vikram; Kumar, Arvind, Modeling of heat transfer and fluid flow in epsom salt (MgSO4 center dot 7H2)O) dissociation for thermochemical energy storage, JOURNAL OF ENERGY STORAGE, Vol.31, 2020.
  80. Vyas, Nalinaksh S., Professor J S Rao 27th Dec. 1939-4th July 2020) Obituary, JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES, Vol.8, 2020.
  81. Nath, Binita; Borthakur, Manash Pratim; Biswas, Gautam, Electric field induced dynamics of viscoplastic droplets in shear flow, PHYSICS OF FLUIDS, Vol.32, 2020.
  82. Vaishali; Mukhopadhyay, T.; Karsh, P. K.; Basu, B.; Dey, S., Machine learning based stochastic dynamic analysis of functionally graded shells, COMPOSITE STRUCTURES, Vol.237, 2020.
  83. Sreejith, V. S.; Tiwari, Nachiketa, Modelling of a hydroacoustic projector to produce low frequency sound, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, Vol.147, 2020.
  84. Kalwar, Ankur; Singh, Akhilendra Pratap; Agarwal, Avinash Kumar, Utilization of primary alcohols in dual-fuel injection mode in a gasoline direct injection engine, FUEL, Vol.276, 2020.
  85. Upadhyay, Ram Krishna; Mishra, Ashish Kumar; Kumar, Arvind, Mechanical Degradation of 3D Printed PLA in Simulated Marine Environment, SURFACES AND INTERFACES, Vol.21, 2020.
  86. Singh, Akhilendra Pratap; Agarwal, Avinash Kumar, Split Injection Strategies for Biodiesel-Fueled Premixed Charge Compression Ignition Combustion Engine-Part II: Particulate Studies, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.142, 2020.
  87. Aggarwal, Akash; Chouhan, Arvind; Patel, Sushil; Yadav, D. K.; Kumar, Arvind; Vinod, A. R.; Prashanth, K. G.; Gurao, N. P., Role of impinging powder particles on melt pool hydrodynamics, thermal behaviour and microstructure in laser-assisted DED process: A particle-scale DEM - CFD - CA approach, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol.158, 2020.
  88. Patel, Divyansh Singh; Agrawal, Vishal; Ramkumar, J.; Jain, V. K.; Singh, Gaganpreet, Micro-texturing on free-form surfaces using flexible-electrode through-mask electrochemical micromachining, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol.282, 2020.
  89. Bhanawat, Abhinav; Yadav, Mahesh Kumar; Punetha, Maneesh; Khandekar, Sameer; Sharma, Pavan K., Effect of Surface Inclination on Filmwise Condensation Heat Transfer During Flow of Steam-Air Mixtures, JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol.12, 2020.
  90. Banerjee, S.; Pattnayek, S.; Kumar, R.; Kar, K. K., Impact of Graphite on Thermomechanical, Mechanical, Thermal, Electrical Properties, and Thermal Conductivity of HDPE/Copper Composites, FUEL CELLS, Vol.20, 2020.
  91. Nirala, Akhileshwar; Upadhyaya, Anish, Experimental Characterization and Sintering Behavior in Mixed Atmosphere (N-2 and H-2) of Fe3P-Added Ferritic Stainless Steel (434L), JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol.29, 2020.
  92. Penke, Yaswanth K.; Sinha, Prerna; Yadav, Amit K.; Ramkumar, Janakarajan; Kar, Kamal K., Al3+-doped 3d-transitional metal (Mn/Cu) ferrite impregnated rGO for PEC water-splitting/supercapacitor electrode with oxygen vacancies and surface intercalation aspects, COMPOSITES PART B-ENGINEERING, Vol.202, 2020.
  93. Chouksey, Mayank; Keralavarma, Shyam M.; Basu, Sumit, Exploring subtle features of yield surfaces of porous, ductile solids through unit cell simulations, MECHANICS OF MATERIALS, Vol.151, 2020.
  94. Bhandari, Ajay; Bansal, Ankit; Sinha, Niraj, Numerical modeling of therapeutic lens drug delivery in the anterior human eye for the treatment of primary open-angle glaucoma, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, Vol.234, 2020.
  95. Bhattacharya, Shantanu; Kumar, Sanjay; Singh, Sanjeet Kumar; Bhushan, Pulak; Sahu, Megha; Prakash, Om, Ashok chakra-structured meta-structure as a perfect sound absorber for broadband low-frequency sound, APPLIED PHYSICS LETTERS, Vol.117, 2020.
  96. Pal, Anikesh; Chalamalla, Vamsi K., Evolution of plumes and turbulent dynamics in deep-ocean convection, JOURNAL OF FLUID MECHANICS, Vol.889, 2020.
  97. Karmakar, Avijit; Saha, Arun K., Unsteady flow past a square cylinder placed close to a free surface, PHYSICS OF FLUIDS, Vol.32, 2020.
  98. Law, Mohit; Gupta, Pulkit; Mukhopadhyay, Suparno, Modal analysis of machine tools using visual vibrometry and output-only methods, CIRP ANNALS-MANUFACTURING TECHNOLOGY, Vol.69, 2020.
  99. Sahoo, Saikat; Saboo, Mahesh; Pratihar, Dilip Kumar; Mukhopadhyay, Sudipta, Real-Time Detection of Actual and Early Gait Events During Level-Ground and Ramp Walking, IEEE SENSORS JOURNAL, Vol.20, 2020.
  100. Singh, Sandeep Kumar; Akhtar, Mohammad Jaleel; Kar, Kamal K., Synthesis of a Lightweight Nanocomposite Based on Polyaniline 3D Hollow Spheres Integrated Milled Carbon Fibers for Efficient X-Band Microwave Absorption, INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, Vol.59, 2020.
  101. Vyasarayani, C. P.; Chatterjee, Anindya, New approximations, and policy implications, from a delayed dynamic model of a fast pandemic, PHYSICA D-NONLINEAR PHENOMENA, Vol.414, 2020.
  102. Joshi, Apurv; Sharma, Ishan; Krishnamurthy, Pradeep Kumar, Semi-analytical approach for calculation of intercore crosstalk in multicore fibers, OPTICAL FIBER TECHNOLOGY, Vol.60, 2020.
  103. Pandey, Alok K.; Pal, Tanvi; Sharma, Raghunandan; Kar, Kamal K., Study of matrix-filler interaction through correlations between structural and viscoelastic properties of carbonous-filler/polymer-matrix composites, JOURNAL OF APPLIED POLYMER SCIENCE, Vol.137, 2020.
  104. Verma, Mahendra K.; Alam, Shadab; Chatterjee, Soumyadeep, Turbulent drag reduction in magnetohydrodynamic and quasi-static magnetohydrodynamic turbulence, PHYSICS OF PLASMAS, Vol.27, 2020.
  105. Bansal, Abhishek; Bhandari, Arihant; Chakraborty, Pritam; Bhattacharya, Jishnu; Pala, Raj Ganesh S., Alloying with Ge and Hollowing Reduces Lithiation-Induced Stresses in Si Nanopillar Anodes, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, Vol.167, 2020.
  106. Penke, Yaswanth K.; Yadav, Amit K.; Sinha, Prerna; Malik, Iram; Ramkumar, Janakarajan; Kar, Kamal K., Arsenic remediation onto redox and photo-catalytic/electrocatalytic Mn-Al-Fe impregnated rGO: Sustainable aspects of sludge as supercapacitor, CHEMICAL ENGINEERING JOURNAL, Vol.390, 2020.
  107. Kumar, Pawan; Yadav, Anshul; Kumar, Arvind, ELECTRON BEAM PROCESSING OF SENSORS RELEVANT VACOFLUX-49 ALLOY: EXPERIMENTAL STUDIES OF THERMAL ZONES AND MICROSTRUCTURE, ARCHIVES OF METALLURGY AND MATERIALS, Vol.65, 2020.
  108. Alam, Fahad; Shukla, Vishnu Raj; Varadarajan, K. M.; Kumar, S., Microarchitected 3D printed polylactic acid (PLA) nanocomposite scaffolds for biomedical applications, JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, Vol.103, 2020.
  109. Sharma, Asha; Basu, Sumit; Gupta, Nandini, Detection of charge around a nanoparticle in a nanocomposite using electrostatic force microscopy, IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION, Vol.27, 2020.
  110. Sahu, G. N.; Vashisht, S.; Wahi, P.; Law, M., Validation of a hardware-in-the-loop simulator for investigating and actively damping regenerative chatter in orthogonal cutting, CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, Vol.29, 2020.
  111. Pal, Anikesh, Deep Learning Emulation of Subgrid-Scale Processes in Turbulent Shear Flows, GEOPHYSICAL RESEARCH LETTERS, Vol.47, 2020.
  112. Singla, Shivam; Chatterjee, Anindya, Nonlinear responses of an SDOF structure with a light, whirling, driven, untuned pendulum, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol.168, 2020.
  113. Pandey, M.; Bhattacharya, B., Effect of bolster suspension parameters of three-piece freight bogie on the lateral frame force, INTERNATIONAL JOURNAL OF RAIL TRANSPORTATION, Vol.8, 2020.
  114. Jacob, Beno J.; Misra, Santanu; Parameswaran, Venkitanarayanan; Mandal, Nibir, Control of planar fabrics on the development of tensile damage zones under high-speed deformation: An experimental study with granite and gneiss, JOURNAL OF STRUCTURAL GEOLOGY, Vol.140, 2020.
  115. Saxena, Rajat; Agarwal, Naman; Rakshit, Dibakar; Kaushik, S. C., Suitability Assessment and Experimental Characterization of Phase Change Materials for Energy Conservation in Indian Buildings, JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME, Vol.142, 2020.
  116. Varshney, A.; Sangal, S.; Pramanick, A. K.; Mondal, K., On the extent of transformation of austenite to bainitic ferrite and carbide during austempering of high Si steel for prolonged duration and its effect on mechanical properties, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol.793, 2020.
  117. Chamoli, Pankaj; Srivastava, Tulika; Tyagi, Alekha; Raina, K. K.; Kar, Kamal K., Urea and cow urine-based green approach to fabricate graphene-based transparent conductive films with high conductivity and transparency, MATERIALS CHEMISTRY AND PHYSICS, Vol.242, 2020.
  118. Shah, Ram Krishna; Khandekar, Sameer, Manipulation of Taylor bubble flow in a magneto-fluidic system, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, Vol.593, 2020.
  119. Kumar, Rajesh; Shukla, Rajesh Kumar; Kumar, Alok; Kumar, Arvind, A computational study on air entrapment and its effect on convective heat transfer during droplet impact on a substrate, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol.153, 2020.
  120. Ahmad, Rasool; Paul, Saptarshi; Basu, Sumit, Characterization of entanglements in glassy polymeric ensembles using the Gaussian linking number, PHYSICAL REVIEW E, Vol.101, 2020.
  121. Kumar, Rudra; Bhuvana, Thiruvelu; Sharma, Ashutosh, Ammonolysis synthesis of nickel molybdenum nitride nanostructures for high-performance asymmetric supercapacitors, NEW JOURNAL OF CHEMISTRY, Vol.44, 2020.
  122. Pandey, Animesh; Gupta, Anurag, Topological Defects and Metric Anomalies as Sources of Incompatibility for Piecewise Smooth Strain Fields, JOURNAL OF ELASTICITY, Vol.139, 2020.
  123. Tanwar, Ruchika; Kumari, Ritu; Mandal, Uttam K.; Kar, Kamal K., Catalytic activity of surface-functionalized nanoscale nickel zinc multiferrites: potential vector for water purification, JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY, Vol.95, 2020.
  124. Pradhan, Tapan Kumar; Panigrahi, Pradipta Kumar, Suppressing internal convection of a droplet using confinement during protein crystallization, JOURNAL OF APPLIED PHYSICS, Vol.128, 2020.
  125. Mukhopadhyay, Tanmoy; Ma, Jiayao; Feng, Huijuan; Hou, Degao; Gattas, Joseph M.; Chen, Yan; You, Zhong, Programmable stiffness and shape modulation in origami materials: Emergence of a distant actuation feature, APPLIED MATERIALS TODAY, Vol.19, 2020.
  126. Bhardwaj, Tarun; Shukla, Mukul; Prasad, Nisheeth K.; Paul, C. P.; Bindra, K. S., Direct Laser Deposition-Additive Manufacturing of Ti-15Mo Alloy: Effect of Build Orientation Induced Surface Topography on Corrosion and Bioactivity, METALS AND MATERIALS INTERNATIONAL, Vol.26, 2020.
  127. Sharma, Basant Lal, Transmission of waves across atomic step discontinuities in discrete nanoribbon structures, ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK, Vol.71, 2020.
  128. Tyagi, Alekha; Banerjee, Soma; Singh, Shashank; Kar, Kamal K., Biowaste derived activated carbon electrocatalyst for oxygen reduction reaction: Effect of chemical activation, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol.45, 2020.
  129. Chakraverty, A. P.; Dash, Sambhabana; Maharana, H. S.; Beura, S.; Mohanty, U. K., A novel investigation on durability of GRE composite pipe for prolonged sea water transportation, COMPOSITES COMMUNICATIONS, Vol.17, 2020.
  130. Singh, Akhilendra Pratap; Sharma, Nikhil; Satsangi, Dev Prakash; Agarwal, Avinash Kumar, Effect of Fuel Injection Pressure and Premixed Ratio on Mineral Diesel-Methanol Fueled Reactivity Controlled Compression Ignition Mode Combustion Engine, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.142, 2020.
  131. Singh, Akhilendra Pratap; Agarwal, Avinash Kumar, Biodiesel Spray Characteristics and Their Effect on Engine Combustion and Particulate Emissions, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.142, 2020.
  132. Muaz, Muhammed; Choudhury, Sounak Kumar, A realistic 3D finite element model for simulating multiple rotations of modified milling inserts using coupled temperature-displacement analysis, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.107, 2020.
  133. Bhandari, Arihant; Bhattacharya, Jishnu; Pala, Raj Ganesh S., Adsorption Preference of HF over Ethylene Carbonate Leads to Dominant Presence of Fluoride Products in LiFePO4 Cathode- Electrolyte Interface in Li-Ion Batteries, JOURNAL OF PHYSICAL CHEMISTRY C, Vol.124, 2020.
  134. Sing, Mahesh K.; Dutta, Ashish; Venkatesh, K. S., Multi-sensor data fusion for accurate surface modeling, SOFT COMPUTING, Vol.24, 2020.
  135. Agarwal, Avinash Kumar; Singh, Akhilendra Pratap; Gupta, Tarun; Agarwal, Rashmi Avinash; Sharma, Nikhil; Pandey, Swaroop Kumar; Ateeq, Bushra, Toxicity of exhaust particulates and gaseous emissions from gasohol (ethanol blended gasoline)-fuelled spark ignition engines, ENVIRONMENTAL SCIENCE-PROCESSES & IMPACTS, Vol.22, 2020.
  136. Anas, Mohammad; Joshi, Pranav; Verma, Mahendra K., Freely decaying turbulence in a finite domain at finite Reynolds number, PHYSICS OF FLUIDS, Vol.32, 2020.
  137. Jangid, Hitesh; Jain, Subham; Teka, Beteley; Raja, Rekha; Dutta, Ashish, Kinematics-based end-effector path control of a mobile manipulator system on an uneven terrain using a two-stage Support Vector Machine, ROBOTICA, Vol.38, 2020.
  138. Chaudhary, Kajal; Singh, Gaganpreet; Ramkumar, J.; Ramakrishna, S. Anantha; Srivastava, Kumar Vaibhav; Ramamurthy, Praveen C., Optically Transparent Protective Coating for ITO-Coated PET-Based Microwave Metamaterial Absorbers, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, Vol.10, 2020.
  139. Malik, Iram; Srivastava, Tulika; Surthi, Kiran Kumar; Gayner, Chhatrasal; Kar, Kamal K., Enhanced thermoelectric performance of n-type Bi2Te3 alloyed with low cost and highly abundant sulfur, MATERIALS CHEMISTRY AND PHYSICS, Vol.255, 2020.
  140. Paul, Karsten; Zimmermann, Christopher; Duong, Thang X.; Sauer, Roger A., Isogeometric continuity constraints for multi-patch shells governed by fourth-order deformation and phase field models, COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, Vol.370, 2020.
  141. Sahu, Govind N.; Singh, Suyash; Singh, Aditya; Law, Mohit, Static and Dynamic Characterization and Control of a High-Performance Electro-Hydraulic Actuator, ACTUATORS, Vol.9, 2020.
  142. Prasad, Rajesh Kumar; Mustafi, Nirendra; Agarwal, Avinash Kumar, Effect of spark timing on laser ignition and spark ignition modes in a hydrogen enriched compressed natural gas fuelled engine, FUEL, Vol.276, 2020.
  143. Sinha, Prerna; Yadav, Amit; Tyagi, Alekha; Paik, Pradip; Yokoi, Hiroyuki; Naskar, Amit K.; Kuila, Tapas; Kar, Kamal K., Keratin-derived functional carbon with superior charge storage and transport for high-performance supercapacitors, CARBON, Vol.168, 2020.
  144. Samanta, Debabrata; Kumar, Manish; Singh, Sugandha; Verma, Parul; Kar, Kamal K.; Maji, Tapas Kumar; Ghorai, Manas K., Triphenylamine and terpyridine-zinc(ii) complex based donor-acceptor soft hybrid as a visible light-driven hydrogen evolution photocatalyst, JOURNAL OF MATERIALS CHEMISTRY A, Vol.8, 2020.
  145. Dubey, Shruti; Awasthi, Shikha; Nisar, Ambreen; Balani, Kantesh, Role of Interfaces in Damage Initiation and Tolerance of Carbon Nanotube-Reinforced HfB2-ZrB2 Ceramics, JOM, Vol. 72, 2020.
  146. Bhushan, Braj; Basu, Sabnam; Panigrahi, Pradipta Kumar; Dutta, Sourav, Exploring the Thermal Signature of Guilt, Shame, and Remorse, FRONTIERS IN PSYCHOLOGY, Vol. 11, 2020.
  147. Balamurugan, G.; Rodda, A.; Philip, J.; Mandal, A. C., Characteristics of the turbulent non-turbulent interface in a spatially evolving turbulent mixing layer, JOURNAL OF FLUID MECHANICS, Vol. 894, 2020.
  148. Maharana, H. S.; Murty, S. V. S. Narayana; Ramkumar, J.; Mondal, K., Continuous and ordered surface microtexturing on Cu and Ni-based alloys by novel electrochemical dissolution, JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 817, 2020.
  149. De, Souradip; Sahoo, Soumya Ranjan; Wahi, Pankaj, Communication-Delay-Dependent Rendezvous With Possible Negative Controller Gain in Cyclic Pursuit, IEEE TRANSACTIONS ON CONTROL OF NETWORK SYSTEMS, Vol. 7, 2020.
  150. Sharma, Nikhil; Bachalo, William D.; Agarwal, Avinash Kumar, Spray droplet size distribution and droplet velocity measurements in a firing optical engine, PHYSICS OF FLUIDS, Vol. 32, 2020.
  151. Punetha, Maneesh; Yadav, Mahesh Kumar; Khandekar, Sameer; Sharma, Pavan K.; Ganju, Sunil, Intrinsic transport and combustion issues of steam-air-hydrogen mixtures in nuclear containments, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol. 452020.
  152. Dixit, K.; Gupta, P.; Kamle, S.; Sinha, N., Structural analysis of porous bioactive glass scaffolds using micro-computed tomographic images, JOURNAL OF MATERIALS SCIENCE, Vol. 55, 2020.
  153. Sharma, Asha; Basu, Sumit; Gupta, Nandini, Investigation of the interface in nanodielectrics using electrostatic force microscopy, IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION, Vol. 27, 2020.
  154. Mokhalingam, Aningi; Ghaffari, Reza; Sauer, Roger A.; Gupta, Shakti S., Comparing quantum, molecular and continuum models for graphene at large deformations, CARBON, Vol. 159, 2020.
  155. Sonkusare, Reshma; Jain, Roopam; Biswas, Krishanu; Parameswaran, Venkitanarayanan; Gurao, N. P., High strain rate compression behaviour of single phase CoCuFeMnNi high entropy alloy, JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 823, , 2020.
  156. Nagarajan, Srinivasan; Gurao, N. P.; Parameswaran, Venkitanarayanan, On the kinetics of texture development in Al-Mg alloy under high strain rate tension, MATERIALS CHARACTERIZATION, Vol. 163, 2020.
  157. Pandey, M.; Bhattacharya, B., A Parametric Study Analysing the Effect of Bolster Suspension Parameters on the Carbody Dynamic Response in a Freight Wagon Fitted with Three-Piece Bogie, JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES, Vol. 8, 2020.
  158. Yadav, S.; Jinoop, A. N.; Sinha, N.; Paul, C. P.; Bindra, K. S., Parametric investigation and characterization of laser directed energy deposited copper-nickel graded layers, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 108, 2020.
  159. Kirar, Pavan Kumar; Alvarenga, Kathryn; Kolhe, Pankaj; Biswas, Gautam; Sahu, Kirti Chandra, Coalescence of drops on the free-surface of a liquid pool at elevated temperatures, PHYSICS OF FLUIDS, Vol. 32, 2020.
  160. Adhikari, Sondipon; Rastogi, Akshat; Bhattacharya, Bishakh, Piezoelectric vortex induced vibration energy harvesting in a random flow field, SMART MATERIALS AND STRUCTURES, Vol. 29, 2020.
  161. Nisar, Ambreen; Bajpai, Shipra; Khan, Mohammad Mohsin; Balani, Kantesh, Wear damage tolerance and high temperature oxidation behavior of HfB2:ZrB2-SiC composites, CERAMICS INTERNATIONAL, Vol. 46, 2020.
  162. Sundriyal, Poonam; Bhattacharya, Shantanu, Textile-based supercapacitors for flexible and wearable electronic applications, SCIENTIFIC REPORTS, Vol. 10, 2020.
  163. Surthi, Kiran Kumar; Kar, Kamal K.; Janakarajan, Ramkumar, Shape controlled and structurally stabilized Co-doped olivine lithium phosphate cathodes for high voltage conventional, thin and flexible Li-ion batteries, CHEMICAL ENGINEERING JOURNAL, Vol. 399, 2020.
  164. Mandariya, Anil Kumar; Tripathi, S. N.; Gupta, Tarun; Mishra, Gaurav, Wintertime hygroscopic growth factors (HGFs) of accumulation mode particles and their linkage to chemical composition in a heavily polluted urban atmosphere of Kanpur at the Centre of IGP, India: Impact of ambient relative humidity, SCIENCE OF THE TOTAL ENVIRONMENT, Vol. 704, 2020.
  165. Saxena, Prashant; Sharma, Basant Lal, On equilibrium equations and their perturbations using three different variational formulations of nonlinear electroelastostatics, MATHEMATICS AND MECHANICS OF SOLIDS, Vol. 25, 2020.
  166. Kiniger, Giovanni; Sglavo, Vincenzo; Jha, Shikhar K.; Raj, Rishi, Flash-induced spreading of metals on zirconia, SCRIPTA MATERIALIA, Vol. 176, 2020.
  167. Alam, Fahad; Kumar, Anil; Shukla, Vishnu Raj; Nisar, Ambreen; Balani, Kantesh, Multi-length scale wear damage mechanisms of ultra-high molecular weight polyethylene nanocomposites, POLYMER TESTING, Vol. 81, 2020.
  168. Tripathi, Pragya; Katiyar, Prvan Kumar; Ramkumar, Janakarajan; Balani, Kantesh, Synergistic role of carbon nanotube and yttria stabilised zirconia reinforcement on wear and corrosion resistance of Cr-based nano-composite coatings, SURFACE & COATINGS TECHNOLOGY, Vol. 385, 2020.
  169. Dwivedi, A. K.; Kumar, Manish; Mishra, Gaurav; Joshi, Manish; Khan, Arshad; Tiwari, Naveen; Kumar, Sidyant; Saud, T.; Sapra, B. K.; Tripathi, S. N., Optimization of controlling parameters of plasma torch aerosol generator and characteristics of synthesized metal oxide aerosols in context of NAF program, PROGRESS IN NUCLEAR ENERGY, Vol. 123, 2020.
  170. Singh, Preeti; Mudgal, Vijay; Khanna, Sourav; Mallick, Tapas K.; Reddy, K. S., Experimental investigation of solar photovoltaic panel integrated with phase change material and multiple conductivity-enhancing-containers, ENERGY, Vol. 205, 2020.
  171. Basu, Aviru Kumar; Basu, Adreeja; Bhattacharya, Shantanu, Micro/Nano fabricated cantilever based biosensor platform: A review and recent progress, ENZYME AND MICROBIAL TECHNOLOGY, Vol. 139, 2020.
  172. Kumar, Rajesh; Sahoo, Sumanta; Joanni, Ednan; Singh, Rajesh K.; Maegawa, Keiichiro; Tan, Wai Kian; Kawamura, Go; Kar, Kamal K.; Matsuda, Atsunori, Heteroatom doped graphene engineering for energy storage and conversion, MATERIALS TODAY, Vol. 39, 2020.
  173. Sharma, Naresh; Kumar, Govind; Garg, Vivek; Mote, Rakesh G.; Ramarao, Vijaya; Gupta, Shilpi, Translationally Invariant Generation of Annular Beams Using Thin Films, IEEE PHOTONICS TECHNOLOGY LETTERS, Vol. 32, 2020.
  174. Pandiyan, Arunkumar; Uthayakumar, Aarthi; Lim, Chaesung; Ganesan, Vinothkumar; Yu, Wonjong; Das, Amit; Lee, Sanghoon; Tsampas, Mihalis N.; Omar, Shobit; Han, Jeong Woo; Moorthy, Suresh Babu Krishna; Cha, Suk-Won, Validation of defect association energy on modulating oxygen ionic conductivity in low temperature solid oxide fuel cell, JOURNAL OF POWER SOURCES, Vol. 480, 2020.
  175. Chowdhury, Anirban; Dutta, Ashish; Prasad, Girijesh, Corticomuscular Co-Activation Based Hybrid Brain-Computer Interface for Motor Recovery Monitoring, IEEE ACCESS, Vol. 8, 2020.
  176. Sharma, Basant Lal; Mishuris, Gennady, Scattering on a square lattice from a crack with a damage zone, PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, Vol. 476, 2020.
  177. Wang, Hairui; Zhao, Danyang; Jin, Yifei; Wang, Minjie; Mukhopadhyay, Tanmoy; You, Zhong, Modulation of multi-directional auxeticity in hybrid origami metamaterials, APPLIED MATERIALS TODAY, Vol. 20, 2020.
  178. Yadav, Amit; Kar, Kamal K., One-dimensional lithium ion capacitor in core-shell wire shape construction for wearable applications, CHEMICAL ENGINEERING JOURNAL, Vol. 401, 2020.
  179. Basu, Aviru Kumar; Sah, Amar Nath; Dubey, Mayank Manjul; Dwivedi, Prabhat K.; Pradhan, Asima; Bhattacharya, Shantanu, MWCNT and alpha-Fe2O3 embedded rGO-nanosheets based hybrid structure for room temperature chloroform detection using fast response/recovery cantilever based sensors, SENSORS AND ACTUATORS B-CHEMICAL, Vol. 305, 2020.
  180. Kar, Kamal K.; Ray, Sudip; De Sarkar, Mousumi, Preface to the special issue in honor of Professor Anil K. Bhowmick on the occasion of his 65th birthday, JOURNAL OF APPLIED POLYMER SCIENCE, Vol. 137, 2020.
  181. Vyasarayani, C. P.; Chatterjee, Anindya, Complete dimensional collapse in the continuum limit of a delayed SEIQR network model with separable distributed infectivity, NONLINEAR DYNAMICS, Vol. 101, 2020.
  182. Zhao, Yani; Singh, Manjesh K.; Kremer, Kurt; Cortes-Huerto, Robinson; Mukherji, Debashish, Why Do Elastin-Like Polypeptides Possibly Have Different Solvation Behaviors in Water-Ethanol and Water-Urea Mixtures?, MACROMOLECULES, Vol. 53, 2020.
  183. Kar, Subhajit; Guha, Anirban, An inverse technique for reconstructing ocean's density stratification from surface data, OCEAN MODELLING, Vol. 147, 2020.
  184. Mishra, Rahul; Soti, Atul; Bhardwaj, Rajneesh; Kulkarni, Salil S.; Thompson, Mark C., Transverse vortex-induced vibration of a circular cylinder on a viscoelastic support at low Reynolds number, JOURNAL OF FLUIDS AND STRUCTURES, Vol. 95, 2020.
  185. Gupta, Kritesh Kumar; Mukhopadhyay, Tanmoy; Roy, Aditya; Dey, Sudip, Probing the compound effect of spatially varying intrinsic defects and doping on mechanical properties of hybrid graphene monolayers, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, Vol. 50, 2020.
  186. Patti, Biswaranjan; Taneja, Taaresh; Arghode, Vaibhav Kumar, Body force model for simulating airflow through dynamically oscillating louvers, SCIENCE AND TECHNOLOGY FOR THE BUILT ENVIRONMENT, Vol. 26, 2020.
  187. Raj, Arindam; Dhandia, Neeraj; Balani, Kantesh, Adhesin Protein Interaction of Staphylococcus Aureus Bacteria with Various Biomaterial Surfaces, ACS BIOMATERIALS SCIENCE & ENGINEERING, Vol. 6, 2020.
  188. Tayde, Yakeen; Chaudhary, Kajal; Singh, Gaganpreet; Dhumal, Ayushi; Saikia, Mondeep; Srivastava, Kumar V.; Ramkumar, Janakrajan; Ramakrishna, Subramaniam A., An optically transparent and flexible microwave absorber for X and Ku bands application, MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, Vol. 62, 2020.
  189. Mistri, Moumita; Joshi, Shrikant; Kar, Kamal K.; Balani, Kantesh, Tribomechanical insight into carbide-laden hybrid suspension-powder plasma-sprayed Tribaloy T400 composite coatings, SURFACE & COATINGS TECHNOLOGY, Vol. 396, 2020.
  190. Teotia, Arun Kumar; Dienel, Kasper; Qayoom, Irfan; van Bochove, Bas; Gupta, Sneha; Partanen, Jouni; Seppala, Jukka; Kumar, Ashok, Improved Bone Regeneration in Rabbit Bone Defects Using 3D Printed Composite Scaffolds Functionalized with Osteoinductive Factors, ACS APPLIED MATERIALS & INTERFACES, Vol. 12, 2020.
  191. Ansari, Nooruddin; Tran, Brian; Poole, Warren J.; Singh, Sudhanshu S.; Krishnaswamy, Hariharan; Jain, Jayant, High temperature deformation behavior of Mg-5wt.%Y binary alloy: Constitutive analysis and processing maps, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 777, 2020.
  192. Awasthi, Shikha; Pandey, Sarvesh Kumar; Balani, Kantesh, Tuning the magnetism and tribological behaviour of electrodeposited Ni/Cu bi-layer by selective reinforcement of carbon nanotubes, JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 818, 2020.
  193. Kalita, Kanak; Mukhopadhyay, Tanmoy; Dey, Partha; Haldar, Salil, Genetic programming-assisted multi-scale optimization for multi-objective dynamic performance of laminated composites: the advantage of more elementary-level analyses, NEURAL COMPUTING & APPLICATIONS, Vol. 32, 2020.
  194. Guha, Anirban; Heifetz, Eyal; Gupta, Akanksha, Pairs of surface wave packets with zero-sum energy in the Hawking radiation analog, PHYSICAL REVIEW D, Vol. 102, 2020.
  195. Singh, Nawab; Ali, Azahar; Rai, Prabhakar; Ghori, Inayathullah; Sharma, Ashutosh; Malhotra, B. D.; John, Renu, Dual-modality microfluidic biosensor based on nanoengineered mesoporous graphene hydrogels, LAB ON A CHIP, Vol. 20, 2020.
  196. Singh, Preeti; Khanna, Sourav; Newar, Sanjeev; Sharma, Vashi; Reddy, K. Srinivas; Mallick, Tapas K.; Becerra, Victor; Radulovic, Jovana; Hutchinson, David; Khusainov, Rinat, Solar Photovoltaic Panels with Finned Phase Change Material Heat Sinks, ENERGIES, Vol. 13, 2020.
  197. Banerjee, Sreerup; Pal, Anupam; Fox, Mark, Volume and position change of the stomach during gastric accommodation and emptying: A detailed three-dimensional morphological analysis based on MRI, NEUROGASTROENTEROLOGY AND MOTILITY, Vol. 32, 2020.
  198. Tyagi, Alekha; Kar, Kamal K.; Yokoi, Hiroyuki, Atomically dispersed Ni/NixSy anchored on doped mesoporous networked carbon framework: Boosting the ORR performance in alkaline and acidic media, JOURNAL OF COLLOID AND INTERFACE SCIENCE, Vol. 571, 2020.
  199. Mishra, Gaurav; Tripathi, S. N.; Saud, T.; Joshi, Manish; Khan, Arshad; Sapra, B. K., Study on CCN activity of fission product aerosols (CsI and CsOH) and their effect on size and other properties, ATMOSPHERIC RESEARCH, Vol. 236, 2020.
  200. Verma, Ankit; Thakur, Sourbh; Mamba, Gcina; Prateek; Gupta, Raju Kumar; Thakur, Pankaj; Thakur, Vijay Kumar, Graphite modified sodium alginate hydrogel composite for efficient removal of malachite green dye, INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, Vol. 148, 2020.
  201. Rathaur, Vidisha Singh; Kumar, Satyendra; Panigrahi, Pradipta Kumar; Panda, Siddhartha, Investigating the Effect of Antibody-Antigen Reactions on the Internal Convection in a Sessile Droplet via Microparticle Image Velocimetry and DLVO Analysis, LANGMUIR, Vol. 36, 2020.
  202. Bhuvaneshwari, B.; Vivekananthan, S.; Sathiyan, G.; Palani, G. S.; Iyer, Nagesh R.; Rai, Prabhat K.; Mondal, K.; Gupta, Raju Kumar, Doping engineering of V-TiO2 for its use as corrosion inhibitor, JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 816, 2020.
  203. Nizam, Sarwar; Sen, Indra S.; Vinoj, Velu; Galy, Valier; Selby, David; Azam, Mohammad F.; Pandey, Satyendra K.; Creaser, Robert A.; Agarwal, Avinash K.; Singh, Akhilendra P.; Bizimis, Michael, Biomass-Derived Provenance Dominates Glacial Surface Organic Carbon in the Western Himalaya, ENVIRONMENTAL SCIENCE & TECHNOLOGY, Vol. 54, 2020.
2019
  1. Kajal, Sahil; Jain, V. K.; Ramkumar, J.; Nagdeve, Leeladhar, Experimental and theoretical investigations into internal magnetic abrasive finishing of a revolver barrel, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.100, 2019.
  2. Gupta, Abhinav; Saha, Arun K., Suppression of vortex shedding in flow around a square cylinder using control cylinder, EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, Vol.76, 2019.
  3. Kumar, Vikram; Sinha, Sujeet Kumar; Agarwal, Avinash Kumar, Wear Evaluation of Engine Piston Rings Coated With Dual Layer Hard and Soft Coatings, JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, Vol.141, 2019.
  4. Ranmode, Vaibhav; Singh, Manmeet; Bhattacharya, Jishnu, Analytical formulation of effective heat transfer coefficient and extension of lumped capacitance method to simplify the analysis of packed bed storage systems, SOLAR ENERGY, Vol.183, 2019.
  5. Chanda, Samarjeet; Balaji, C.; Venkateshan, S. P., Non-intrusive measurement of thermal contact conductance at polymer-metal two dimensional annular interface, HEAT AND MASS TRANSFER, Vol.55, 2019.
  6. Kumar, Manoj; Gautam, Sachin S.; Dixit, Prakash M., A non-linear ductile damage growth law at elevated temperature, SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, Vol.44, 2019.
  7. Singh, Sachin; Kumar, Deepu; Sankar, M. Ravi; Jain, V. K., Viscoelastic medium modeling and surface roughness simulation of microholes finished by abrasive flow finishing process, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.100, 2019.
  8. Shukla, Rajesh Kumar; Kumar, Alok; Kumar, Rajesh; Singh, Digvijay; Kumar, Arvind, Numerical study of pore formation in thermal spray coating process by investigating dynamics of air entrapment, SURFACE & COATINGS TECHNOLOGY, Vol.378, 2019.
  9. Soni, Vikram; Kumar, Arvind; Jain, V. K., Fast waste heat recovery in 100-150 degrees C using close-contact charging of nano-enhanced PCM composite, JOURNAL OF MOLECULAR LIQUIDS, Vol.285, 2019.
  10. Kanchwala, Husain; Chatterjee, Anindya, Rationally Derived Three-Parameter Models for Elastomeric Suspension Bushings: Theory and Experiment, JOURNAL OF TESTING AND EVALUATION, Vol.47, 2019.
  11. Nagdeve, Leeladhar; Jain, V. K.; Ramkumar, J., Preliminary investigations into nano-finishing of freeform surface (femoral) using inverse replica fixture, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.100, 2019.
  12. Sharma, Basant Lal, On electronic conductance of partially unzipped armchair nanotubes: further analysis, EUROPEAN PHYSICAL JOURNAL B, Vol.92, 2019.
  13. Sharma, Vyom; Srivastava, Ishan; Jain, V. K.; Ramkumar, J., Modelling of Wire Electrochemical Micromachining (Wire-ECMM) process for anode shape prediction using finite element method, ELECTROCHIMICA ACTA, Vol.312, 2019.
  14. Ramgadia, Abhishek G.; Saha, Arun K., Study of fully-developed turbulent flow and heat transfer in a rotating wavy-walled duct, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol.144, 2019.
  15. Bhandari, Arihant; Jindal, Puneet; Bhattacharya, Jishnu, Discovery of new ground state structures for Li4Mn2O5 and V2O5 from first principles, COMPUTATIONAL MATERIALS SCIENCE, Vol.159, 2019.
  16. Qayoum, Adnan; Panigrahi, Pradipta, Experimental Investigation of Heat Transfer Enhancement in a Two-Pass Square Duct by Permeable Ribs, HEAT TRANSFER ENGINEERING, Vol.40, 2019.
  17. Shah, Ram Krishna; Khandekar, Sameer, Exploring ferrofluids for heat transfer augmentation, JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, Vol.475, 2019.
  18. Sharma, Arun K.; Bhattacharya, Bishakh, Parameter estimation of butyl rubber aided with dynamic mechanical analysis for numerical modelling of an air-inflated torus and experimental validation using 3D-laser Doppler vibrometer, JOURNAL OF LOW FREQUENCY NOISE VIBRATION AND ACTIVE CONTROL, Vol.38, 2019.
  19. Sharma, Eshan; De, Santanu, Large Eddy Simulation-Based Turbulent Combustion Models for Reactive Sprays: Recent Advances and Future Challenges, JOURNAL OF THE INDIAN INSTITUTE OF SCIENCE, Vol.99, 2019.
  20. Chanda, Samarjeet; Singh, Raghvendra Pratap, Prediction of gas production potential and hydrological properties of a methane hydrate reservoir using ANN-GA based framework, THERMAL SCIENCE AND ENGINEERING PROGRESS, Vol.11, 2019.
  21. Upadhyay, Ram Krishna; Kumar, Arvind, Effect of particle weight concentration on the lubrication properties of graphene based epoxy composites, COLLOID AND INTERFACE SCIENCE COMMUNICATIONS, Vol.33, 2019.
  22. Patel, Divyansh Singh; Singh, Abhilasha; Jain, V. K.; Ramkumar, J.; Shrivastava, A., Investigations into insertion force of electrochemically micro-textured hypodermic needles, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.100, 2019.
  23. Ghai, Sanjeev Kumar; De, Santanu, Numerical investigation of flow and scalar fields of piloted, partially-premixed dimethyl ether/air jet flames using stochastic multiple mapping conditioning approach, COMBUSTION AND FLAME, Vol.208, 2019.
  24. Gohil, Trushar B.; Saha, Arun K., Numerical simulation of forced circular jets: Effect of flapping perturbation, PHYSICS OF FLUIDS, Vol.31, 2019.
  25. Saroj, Sunil Kumar; Panigrahi, Pradipta Kumar, Drying pattern and evaporation dynamics of sessile ferrofluid droplet on a PDMS substrate, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, Vol.580, 2019.
  26. Tiwari, Vipul Kumar; Kumar, Alok; Kumar, Arvind, Enhancing ice slurry generation by using inclined cavity for subzero cold thermal energy storage: Simulation, experiment and performance analysis, ENERGY, Vol.183, 2019.
  27. Kene, Amarjit P.; Choudhury, Sounak K., Analytical modeling of tool health monitoring system using multiple sensor data fusion approach in hard machining, MEASUREMENT, Vol.145, 2019.
  28. Dixit, Kartikeya; Sinha, Niraj, Compressive Strength Enhancement of Carbon Nanotube Reinforced 13-93B1 Bioactive Glass Scaffolds, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, Vol.19, 2019.
  29. Bangari, Raghubeer S.; Sinha, Niraj, Adsorption of tetracycline, ofloxacin and cephalexin antibiotics on boron nitride nanosheets from aqueous solution, JOURNAL OF MOLECULAR LIQUIDS, Vol.293, 2019.
  30. Upadhyay, R. K.; Kumar, A., Effect of humidity on the synergy of friction and wear properties in ternary epoxy-graphene-MoS2 composites, CARBON, Vol.146, 2019.
  31. Ghai, Sanjeev Kumar; De, Santanu, Numerical modeling of turbulent premixed combustion using RANS based stochastic multiple mapping conditioning approach, PROCEEDINGS OF THE COMBUSTION INSTITUTE, Vol.37, 2019.
  32. Srivastava, Arpit Kumar; Basu, Sumit, Modelling the performance of devices based on thin dielectric elastomer membranes, MECHANICS OF MATERIALS, Vol.137, 2019.
  33. Mandal, Ashok Kumar; Wahi, Pankaj, Coupled plate-string vibrations in the presence of a finite bridge: Effect on natural frequencies and harmonicity, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, Vol.146, 2019.
  34. Agarwal, Avinash Kumar; Sharma, Nikhil; Singh, Akhilendra Pratap; Kumar, Vikram; Satsangi, Dev Prakash; Patel, Chetankumar, Adaptation of Methanol-Dodecanol-Diesel Blend in Diesel Genset Engine, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.141, 2019.
  35. Upadhyay, Ram Krishna; Kumar, Arvind, Boundary lubrication properties and contact mechanism of carbon/MoS2 based nanolubricants under steel/steel contact, COLLOID AND INTERFACE SCIENCE COMMUNICATIONS, Vol.31, 2019.
  36. Maurya, Gaurav; Sharma, Basant Lal, Scattering by two staggered semi-infinite cracks on square lattice: an application of asymptotic Wiener-Hopf factorization, ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK, Vol.70, 2019.
  37. Behera, Sachidananda; Saha, Arun K., Characteristics of the Flow Past a Wall-Mounted Finite-Length Square Cylinder at Low Reynolds Number With Varying Boundary Layer Thickness, JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, Vol.141, 2019.
  38. Mishra, Ashish Kumar; Kumar, Arvind, Numerical and experimental analysis of the effect of volumetric energy absorption in powder layer on thermal-fluidic transport in selective laser melting of Ti6Al4V, OPTICS AND LASER TECHNOLOGY, Vol.111, 2019.
  39. Guruprasad, Thimmappa Shetty; Basu, Sumit, Some issues concerning the use of a single, material specific length scale parameter in theories of higher order strain gradient plasticity, MECHANICS OF MATERIALS, Vol.136, 2019.
  40. Bari, Pritam; Law, Mohit; Wahi, Pankaj, Improved chip thickness model for serrated end milling, CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, Vol.25, 2019.
  41. Aggarwal, Akash; Patel, Sushil; Kumar, Arvind, Selective Laser Melting of 316L Stainless Steel: Physics of Melting Mode Transition and Its Influence on Microstructural and Mechanical Behavior, JOM, Vol.71, 2019.
  42. Jindal, Puneet; Bhattacharya, Jishnu, Review-Understanding the Thermal Runaway Behavior of Li-Ion Batteries through Experimental Techniques, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, Vol.166, 2019.
  43. Reddy, Soma Sekhar; Soni, Vikram; Kumar, Arvind, Diurnal thermal performance characterization of a solar air heater at local and global scales integrated with thermal battery, ENERGY, Vol.177, 2019.
  44. Kumar, Abhay; Saha, Arun K.; Panigrahi, Pradipta Kumar; Karn, Ashish, On the flow physics and vortex behavior of rectangular orifice synthetic jets, EXPERIMENTAL THERMAL AND FLUID SCIENCE, Vol.103, 2019.
  45. Kumar, Alok; Yadav, Sateesh Kumar; Mahato, Ankit; Kumar, Arvind, On-demand intermittent ice slurry generation for subzero cold thermal energy storage: Numerical simulation and performance analysis, APPLIED THERMAL ENGINEERING, Vol.161, 2019.
  46. Sharma, Shashank; Mandal, Vijay; Ramakrishna, S. A.; Ramkumar, J., Numerical simulation of melt pool oscillations and protuberance in pulsed laser micro melting of SS304 for surface texturing applications, JOURNAL OF MANUFACTURING PROCESSES, Vol.39, 2019.
  47. Chandraprakash, C.; Krishnamurthy, C., V; Balasubramaniam, Krishnan, Thermomechanical Phenomenon: A Non-destructive Evaluation Perspective, TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol.72, 2019.
  48. Sharma, Nikhil; Patel, Chetankumar; Tiwari, Nachiketa; Agarwal, Avinash Kumar, Experimental investigations of noise and vibration characteristics of gasoline-methanol blend fuelled gasoline direct injection engine and their relationship with combustion characteristics, APPLIED THERMAL ENGINEERING, Vol.158, 2019.
  49. Nath, Binita; Bidkar, Anil P.; Kumar, Vikash; Dalal, Amaresh; Jolly, Mohit Kumar; Ghosh, Siddhartha S.; Biswas, Gautam, Deciphering Hydrodynamic and Drug-Resistant Behaviors of Metastatic EMT Breast Cancer Cells Moving in a Constricted Microcapillary, JOURNAL OF CLINICAL MEDICINE, Vol.8, 2019.
  50. Muaz, Muhammed; Choudhury, Sounak Kumar, Enhancing the tribological aspects of machining operation by hybrid lubrication-assisted side-flank-face laser-textured milling insert, JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, Vol.41, 2019.
  51. Sharma, Nikhil; Agarwal, Avinash Kumar, Particle Characterization of Soot Aggregates Emitted by Gasohol Fueled Direct Injection Engine, ENERGY & FUELS, Vol.33, 2019.
  52. Crane, Jackson; Shi, Xian; Singh, Ajay, V; Tao, Yujie; Wang, Hai, Isolating the effect of induction length on detonation structure: Hydrogen-oxygen detonation promoted by ozone, COMBUSTION AND FLAME, Vol.200, 2019.
  53. Ramesh, S.; Anne, Gajanan; Nayaka, H. Shivananda; Sahu, Sandeep; Ramesh, M. R., Influence of Multidirectional Forging on Microstructural, Mechanical, and Corrosion Behavior of Mg-Zn Alloy, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol.28, 2019.
  54. Agarwal, Avinash Kumar; Jiotode, Yeshudas; Sharma, Nikhil, Endoscopic visualization of engine combustion chamber using diesoline, diesosene and mineral diesel for comparative spatial soot and temperature distributions, FUEL, Vol.241, 2019.
  55. Bhattacharya, Shashwat; Samtaney, Ravi; Verma, Mahendra K., Scaling and spatial intermittency of thermal dissipation in turbulent convection, PHYSICS OF FLUIDS, Vol.31, 2019.
  56. Babu, R.; Das, Malay K., Experimental studies of natural convective mass transfer in a water-splitting system, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol.44, 2019.
  57. Sharma, Ishan, High-speed impacts of slender bodies into non-smooth, complex fluids, JOURNAL OF FLUID MECHANICS, Vol.861, 2019.
  58. Bhattacharjee, Arindam; Mohanty, Atanu K.; Chatterjee, Anindya, Expansion of Preisach density in magnetic hysteresis using general basis functions, APPLIED MATHEMATICS AND COMPUTATION, Vol.341, 2019.
  59. Ghai, Sanjeev Kumar; De, Santanu; Kronenburg, Andreas, Numerical simulations of turbulent lifted jet diffusion flames in a vitiated coflow using the stochastic multiple mapping conditioning approach, PROCEEDINGS OF THE COMBUSTION INSTITUTE, Vol.37, 2019.
  60. Kumar, P. Arun; Aileni, Manideep; Rathakrishnan, E., Impact of tab location relative to the nozzle exit on the shock structure of a supersonic jet, PHYSICS OF FLUIDS, Vol.31, 2019.
  61. Sharma, Sumit; Kumar, Pramod; Chandra, Rakesh; Setia, Prince, Prediction of properties of silica nanoparticle/hydroxyapatite fiber reinforced Bis-GMA/TEGDMA composites using molecular dynamics, COMPUTATIONAL MATERIALS SCIENCE, Vol.158, 2019.
  62. Sharma, Ishan, Structural integrity of rubble asteroidal satellites, ICARUS, Vol.319, 2019.
  63. Hirner, Felix Sebastian; Hwang, Joonsik; Bae, Choongsik; Patel, Chetankumar; Gupta, Tarun; Agarwal, Avinash Kumar, Performance and emission evaluation of a small-bore biodiesel compression-ignition engine, ENERGY, Vol.183, 2019.
  64. Sankar, M. R.; Jain, V. K.; Ramkumar, J.; Sareen, S. K.; Singh, S., Medium rheological characterization and performance study during rotational abrasive flow finishing (R-AFF) of Al alloy and Al alloy/SiC MMCs, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.100, 2019.
  65. Hirner, Felix Sebastian; Hwang, Joonsik; Bae, Choongsik; Patel, Chetankumar; Gupta, Tarun; Agarwal, Avinash Kumar, Nanostructure characterization of soot particles from biodiesel and diesel spray flame in a constant volume combustion chamber, FUEL, Vol.235, 2019.
  66. Swain, Digendranath; Gupta, Anurag, Mechanochemical aspects of skin wound healing in microgravity, MECHANICS RESEARCH COMMUNICATIONS, Vol.96, 2019.
  67. Banerjee, Arnab; Das, Raj; Calius, Emilio P., Waves in Structured Mediums or Metamaterials: A Review, ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING, Vol.26, 2019.
  68. Chandran, Krishna; Saha, Arun K.; Mohapatra, Pranab K., Simulation of free surface flows with non-hydrostatic pressure distribution, SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, Vol.44, 2019.
  69. Afzal, Arshad; Kim, Kwang-Yong; Muralidhar, Krishnamurthy; Samad, Abdus; Benini, Ernesto, Optimization with Surrogate Models: Flow and Heat Transfer Applications, MATHEMATICAL PROBLEMS IN ENGINEERING, Vol.2019, 2019.
  70. Sampath, Santhakumar; Bhattacharya, Bishakh; Aryan, Pouria; Sohn, Hoon, A Real-Time, Non-Contact Method for In-Line Inspection of Oil and Gas Pipelines Using Optical Sensor Array, SENSORS, Vol.19, 2019.
  71. Chauhan, Pankaj Singh; Kant, Rishi; Rai, Ashutosh; Gupta, Ankur; Bhattacharya, Shantanu, Facile synthesis of ZnO/GO nanoflowers over Si substrate for improved photocatalytic decolorization of MB dye and industrial wastewater under solar irradiation, MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, Vol.89, 2019.
  72. Nandukumar, Yada; Chakraborty, Suman; Verma, Mahendra K.; Lakkaraju, Rajaram, On heat transport and energy partition in thermal convection with mixed boundary conditions, PHYSICS OF FLUIDS, Vol.31, 2019.
  73. Ramesh, S.; Nayaka, H. Shivananda; Sahu, Sandeep; Gopi, K. R.; Shivaram, M. J.; Arya, Shashibhushan, Influence of Multiaxial Cryoforging on Microstructural, Mechanical, and Corrosion Properties of Copper-Titanium Alloy, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol.28, 2019.
  74. Gupta, Chirag; Jha, Jyoti S.; Jayabalan, Bhagyaraj; Gujrati, Rajat; Alankar, Alankar; Mishra, Sushil, Correlating Hot Deformation Parameters with Microstructure Evolution During Thermomechanical Processing of Inconel 718 Alloy, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol.50A, 2019.
  75. Kumar, Prem; Khandekar, Sameer; Maydanik, Yuri F.; Bhattacharya, Bishakh, Effect of Vibrations on Thermal Performance of Miniature Loop Heat Pipe for Avionics Cooling: An Experimental Analysis, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, Vol.141, 2019.
  76. Ranmode, Vaibhav; Bhattacharya, Jishnu, Macroscopic modelling of the discharge behaviour of sodium air flow battery, JOURNAL OF ENERGY STORAGE, Vol.25, 2019.
  77. Gupta, Prince, Surface Plasmon-Assisted Modification of ((3)) Non-Linearity in a Three-Level Active Medium Near Gold Grating, PLASMONICS, Vol.14, 2019.
  78. Saha, Arun K.; Chanda, Sourayon, Fully-developed natural convection in a periodic array of pin-fins, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol.137, 2019.
  79. Ranjan, Prabhat; Balasubramaniam, R.; Jain, V. K., Mechanism of material removal during nanofinishing of aluminium in aqueous KOH: A reactive molecular dynamics simulation study, COMPUTATIONAL MATERIALS SCIENCE, Vol.156, 2019.
  80. Singh, Manmeet; Bhattacharya, Jishnu, Experimental demonstration of the thermodynamic advantage of modular heat storage system for a variable-temperature input, THERMAL SCIENCE AND ENGINEERING PROGRESS, Vol.13, 2019.
  81. Bhatt, Geeta; Mishra, Keerti; Ramanathan, Gurunath; Bhattacharya, Shantanu, Dielectrophoresis assisted impedance spectroscopy for detection of gold-onjugated amplified DNA samples, SENSORS AND ACTUATORS B-CHEMICAL, Vol.288, 2019.
  82. Muaz, Muhammed; Choudhury, Sounak Kumar, Experimental investigations and multi-objective optimization of MQL-assisted milling process for finishing of AISI 4340 steel, MEASUREMENT, Vol.138, 2019.
  83. Singh, Mahavir; Singh, Amandeep; Ramkumar, J., Thin-wall micromachining of Ti-6Al-4V using micro-wire electrical discharge machining process, JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, Vol.41, 2019.
  84. Sharma, Ankush P.; Khan, Sanan H.; Parameswaran, Venkitanarayanan, Response and failure of fiber metal laminates subjected to high strain rate tensile loading, JOURNAL OF COMPOSITE MATERIALS, Vol.53, 2019.
  85. Kumar, Saurav; Rani, Pooja; Patnaik, Amar; Pradhan, Ajaya Kumar; Kumar, Vinod, Effect of cobalt content on wear behaviour of Al(0.4)FeCrNiCox (x=0, 0.25, 0.5, 1.0 mol) high entropy alloys tested under demineralised water with and without 3.5% NaCl solution, MATERIALS RESEARCH EXPRESS, Vol.6, 2019.
  86. Chowdhury, Anirban; Nishad, Shyam Sunder; Meena, Yogesh Kumar; Dutta, Ashish; Prasad, Girijesh, Hand-Exoskeleton Assisted Progressive Neurorehabilitation Using Impedance Adaptation Based Challenge Level Adjustment Method, IEEE TRANSACTIONS ON HAPTICS, Vol.12, 2019.
  87. Karsh, P. K.; Mukhopadhyay, T.; Chakraborty, S.; Naskar, S.; Dey, S., A hybrid stochastic sensitivity analysis for low-frequency vibration and low-velocity impact of functionally graded plates, COMPOSITES PART B-ENGINEERING, Vol.176, 2019.
  88. Ghai, Sanjeev Kumar; De, Santanu, Numerical investigation of auto-igniting turbulent lifted CH4/air jet diffusion flames in a vitiated co-flow using a RANS based stochastic multiple mapping conditioning approach, COMBUSTION AND FLAME, Vol.203, 2019.
  89. Patel, Chetankumar; Tiwari, Nachiketa; Agarwal, Avinash Kumar, Experimental investigations of Soyabean and Rapeseed SVO and biodiesels on engine noise, vibrations, and engine characteristics, FUEL, Vol.238, 2019.
  90. Punati, Venugopala Swami; Sharma, Ishan; Wahi, Pankaj, An exact dual-integral formulation of the indentation of finite, free-standing, end-supported adhesive elastic layers, MATHEMATICS AND MECHANICS OF SOLIDS, Vol.24, 2019.
  91. Penke, Yaswanth K.; Anantharaman, Ganapathi; Ramkumar, Janakarajan; Kar, Kamal K., Redox synergistic Mn-Al-Fe and Cu-Al-Fe ternary metal oxide nano adsorbents for arsenic remediation with environmentally stable As(0) formation, JOURNAL OF HAZARDOUS MATERIALS, Vol.364, 2019.
  92. Raja, R.; Dutta, A.; Dasgupta, B., Learning framework for inverse kinematics of a highly redundant mobile manipulator, ROBOTICS AND AUTONOMOUS SYSTEMS, Vol.120, 2019.
  93. Basu, Aviru Kumar; Chauhan, Pankaj Singh; Awasthi, Mohit; Bhattacharya, Shantanu, alpha-Fe2O3 loaded rGO nanosheets based fast response/recovery CO gas sensor at room temperature, APPLIED SURFACE SCIENCE, Vol.465, 2019.
  94. Moghadam, Soroush; Dalal, Indranil Saha; Larson, Ronald G., Unraveling Dynamics of Entangled Polymers in Strong Extensional Flows, MACROMOLECULES, Vol.52, 2019.
  95. Ramesh, S.; Anne, Gajanan; Nayaka, H. Shivananda; Sahu, Sandeep; Ramesh, M. R., Investigation of dry sliding wear properties of multi-directional forged Mg-Zn alloys, JOURNAL OF MAGNESIUM AND ALLOYS, Vol.7, 2019.
  96. Singh, Abhilasha; Patel, Divyansh Singh; Ramkumar, J.; Balani, Kantesh, Single step laser surface texturing for enhancing contact angle and tribological properties, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.100, 2019.
  97. Ranjan, Prabhat; Balasubramaniam, R.; Jain, V. K., Molecular Dynamics Simulation of Mechanical Polishing on Stainless Steel Using Diamond Nanoparticles, JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, Vol.141, 2019.
  98. Anas, Mohammad; Verma, Mahendra K., Modeling Ekman and quasi-static magnetohydrodynamic turbulence using Pao's hypothesis, PHYSICAL REVIEW FLUIDS, Vol.4, 2019.
  99. Singh, Sarthak S.; Kitey, Rajesh; Venkitanarayanan, Parameswaran, Effect of post cure temperature cycle on dynamic compression behavior of glass filled epoxy composites, MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, Vol.26, 2019.
  100. Penke, Yaswanth K.; Tiwari, Nidhi; Jha, Shambunath; Bhattacharyya, Dibyendu; Ramkumar, Janakarajan; Kar, Kamal K., Arsenic surface complexation behavior in aqueous systems onto Al substituted Ni, Co, Mn, and Cu based ferrite nano adsorbents, JOURNAL OF HAZARDOUS MATERIALS, Vol.361, 2019.
  101. Khan, Haroon; Kim, Chul Min; Kim, Sung Yeol; Goel, Sanket; Dwivedi, Prabhat K.; Sharma, Ashutosh; Kim, Young Ho; Kim, Gyu Man, Fabrication of Enzymatic Biofuel Cell with Electrodes on Both Sides of Microfluidic Channel, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, Vol.6, 2019.
  102. Kalra, Sahil; Munjal, B. S.; Singh, Vaibhav Raj; Mahajan, Milind; Bhattacharya, Bishakh, Investigations on the suitability of PEEK material under space environment conditions and its application in a parabolic space antenna, ADVANCES IN SPACE RESEARCH, Vol.63, 2019.
  103. Khanna, Sourav; Newar, Sanjeev; Sharma, Vashi; Reddy, K. S.; Mallick, Tapas K., Optimization of fins fitted phase change material equipped solar photovoltaic under various working circumstances, ENERGY CONVERSION AND MANAGEMENT, Vol.180, 2019.
  104. Chouksey, Mayank; Keralavarma, Shyam M.; Basu, Sumit, Computational investigation into the role of localisation on yield of a porous ductile solid, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, Vol.130, 2019.
  105. Khan, Haroon; Kim, Chul Min; Kim, Sung Yeol; Goel, Sanket; Dwivedi, Prabhat K.; Sharma, Ashutosh; Kim, Young Ho; Kim, Gyu Man, Fabrication of Enzymatic Biofuel Cell with Electrodes on Both Sides of Microfluidic Channel (vol 6, pg 511, 2019), INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, Vol.6, 2019.
  106. Shirsath, Ganesh B.; Muralidhar, K.; Pala, Raj Ganesh S.; Ramkumar, J., Condensation of water vapor underneath an inclined hydrophobic textured surface machined by laser and electric discharge, APPLIED SURFACE SCIENCE, Vol.484, 2019.
  107. Singh, Gaganpreet; Sheokand, Harsh; Ghosh, Saptarshi; Srivastava, Kumar Vaibhav; Ramkumar, J.; Ramakrishna, S. Anantha, Excimer laser micromachining of indium tin oxide for fabrication of optically transparent metamaterial absorbers, APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, Vol.125, 2019.
  108. Kumar, Prabhat; Saxena, Anupam; Sauer, Roger A., Computational Synthesis of Large Deformation Compliant Mechanisms Undergoing Self and Mutual Contact, JOURNAL OF MECHANICAL DESIGN, Vol.141, 2019.
  109. Gangwar, Swati; Patnaik, Amar; Yadav, Prabhat Chand; Sahu, Sandeep; Bhat, I. K., Development and properties evaluation of marble dust reinforced ZA-27 alloy composites for ball bearing application, MATERIALS RESEARCH EXPRESS, Vol.6, 2019.
  110. Kumar, P. Arun; Kumar, S. M. Aravindh; Mitra, A. Surya; Rathakrishnan, E., Empirical scaling analysis of supersonic jet control using steady fluidic injection, PHYSICS OF FLUIDS, Vol.31, 2019.
  111. Silveira, M.; Wahi, P.; Fernandes, J. C. M., Exact and approximate analytical solutions of oscillator with piecewise linear asymmetrical damping, INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, Vol.110, 2019.
  112. Kumar, Ravindra; Varshney, Suyash; Kar, Kamal K.; Dasgupta, Kinshuk, Fabrication and Characterization of Eco-Friendly Human-Hair Derived Porous Carbon-Filled Carbon Fabric-Reinforced Polymer Composites, POLYMER COMPOSITES, Vol.40, 2019.
  113. Bhattacharya, Shashwat; Sadhukhan, Shubhadeep; Guha, Anirban; Verma, Mahendra K., Similarities between the structure functions of thermal convection and hydrodynamic turbulence, PHYSICS OF FLUIDS, Vol.31, 2019.
  114. Basu, Aviru Kumar; Sah, Amar Nath; Pradhan, Asima; Bhattacharya, Shantanu, Poly-L-Lysine functionalised MWCNT-rGO nanosheets based 3-d hybrid structure for femtomolar level cholesterol detection using cantilever based sensing platform, SCIENTIFIC REPORTS, Vol.9, 2019.
  115. Vashishtha, Sumit; Samuel, Roshan; Chatterjee, Anando Gopal; Samtaney, Ravi; Verma, Mahendra K., Large eddy simulation of hydrodynamic turbulence using renormalized viscosity, PHYSICS OF FLUIDS, Vol.31, 2019.
  116. Mishra, Alok; Jithin, M.; De, Ashoke; Das, Malay Kumar, Effect of Passive Flow Control of Bifurcation Phenomenon in Sudden Expansion Channel, PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES INDIA SECTION A-PHYSICAL SCIENCES, Vol.89, 2019.
  117. Baghel, Vishakha; Sikarwar, Basant Singh; Muralidhar, K., Modeling of heat transfer through a liquid droplet, HEAT AND MASS TRANSFER, Vol.55, 2019.
  118. Singh, Sarthak S.; Parameswaran, Venkitanarayanan; Kitey, R., Dynamic compression behavior of glass filled epoxy composites: Influence of filler shape and exposure to high temperature, COMPOSITES PART B-ENGINEERING, Vol.164, 2019.
  119. Setu, Sagar; Abhishek, Abhishek; Venkatesan, C., Time-Domain System Identification of Helicopters Using Nonlinear Acceleration and Jerk Prediction Model, JOURNAL OF AIRCRAFT, Vol.56, 2019.
  120. Chandraprakash, C.; Venugopal, Vijayakumar C.; Lakhtakia, Akhlesh; Awadelkarim, Osama O., Long-wavelength infrared characteristics of multifunctional microfibrous thin films of Parylene C, MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, Vol.61, 2019.
  121. Goel, M. D.; Parameswaran, Venkitanarayanan; Mondal, D. P., High Strain Rate Response of Cenosphere-Filled Aluminum Alloy Syntactic Foam, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol.28, 2019.
  122. Selyutina, N. S.; Petrov, Yu, V; Parameswaran, V; Sharma, A. P., The Strain-Rate Sensitivity of Irreversible Deformation of the Metallic Multilayer Composite GLARE, DOKLADY PHYSICS, Vol.64, 2019.
  123. Sarkar, Abhishek; Dutta, Ashish, Optimal Trajectory Generation and Design of an 8-DoF Compliant Biped Robot for Walk on Inclined Ground, JOURNAL OF INTELLIGENT & ROBOTIC SYSTEMS, Vol.94, 2019.
  124. Parameswari, G.; Jain, V. K.; Ramkumar, J.; Nagdeve, Leeladhar, Experimental investigations into nanofinishing of Ti6Al4V flat disc using magnetorheological finishing process, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.100, 2019.
  125. Raj, Raunak; Guha, Anirban, Explosive instability due to flow over a rippled bottom, NONLINEAR PROCESSES IN GEOPHYSICS, Vol.26, 2019.
  126. Jain, Vijay Kumar; Saren, Kisun Kumar; Raghuram, V.; Sankar, M. Ravi, Force analysis of magnetic abrasive nano-finishing of magnetic and non-magnetic materials, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.100, 2019.
  127. Patel, Divyansh Singh; Jain, V. K.; Shrivastava, Ankit; Ramkumar, J., Electrochemical micro texturing on flat and curved surfaces: simulation and experiments, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.100, 2019.
  128. Yadav, Amit; De, Bibekananda; Singh, Sandeep K.; Sinha, Prerna; Kar, Kamal K., Facile Development Strategy of a Single Carbon-Fiber-Based All-Solid-State Flexible Lithium-Ion Battery for Wearable Electronics, ACS APPLIED MATERIALS & INTERFACES, Vol.11, 2019.
  129. Khan, Sanan H.; Sharma, Ankush P., Failure assessment of fiber metal laminates based on metal layer dispersion under dynamic loading scenario, ENGINEERING FAILURE ANALYSIS, Vol.106, 2019.
  130. Singh, M.; Ramkumar, J.; Rao, R., V; Balic, J., Experimental investigation and multi-objective optimization of micro-wire electrical discharge machining of a titanium alloy using Jaya algorithm, ADVANCES IN PRODUCTION ENGINEERING & MANAGEMENT, Vol.14, 2019.
  131. Soni, Vikram; Kumar, Arvind; Jain, V. K., A novel solidification model considering undercooling effect for metal based low temperature latent thermal energy management, JOURNAL OF ENERGY STORAGE, Vol.21, 2019.
  132. Alam, Shadab; Guha, Anirban; Verma, Mahendra K., Revisiting Bolgiano-Obukhov scaling for moderately stably stratified turbulence, JOURNAL OF FLUID MECHANICS, Vol.875, 2019.
  133. Dutta, Samik; Karmakar, Abhishek; Roy, Himadri; Barat, Kaustav, Automatic estimation of mechanical properties from fractographs using optimal anisotropic diffusion and Voronoi tessellation, MEASUREMENT, Vol.134, 2019.
  134. Yadav, Sateesh Kumar; Ziyad, Devshibhai; Kumar, Arvind, Numerical investigation of isothermal and non-isothermal ice slurry flow in horizontal elliptical pipes, INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, Vol.97, 2019.
  135. Upadhyay, R. K.; Kumar, A., Epoxy-graphene-MoS2 composites with improved tribological behavior under dry sliding contact, TRIBOLOGY INTERNATIONAL, Vol.130, 2019.
  136. Surthi, Kiran Kumar; Kar, Kamal K.; Janakarajan, Ramkumar, Enhanced microwave sintering characteristics, electrical and thermal properties of nano Li2TiO3 ceramic and its nanocomposite using LiNi0.5Co0.5PO4 as high-capacity cathode for Li-ion batteries, JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, Vol.135, 2019.
  137. Patel, Vinay Kumar; Kant, Rishi; Choudhary, Anu; Painuly, Madhusudan; Bhattacharya, Shantanu, Performance characterization of Bi2O3/Al nanoenergetics blasted micro-forming system, DEFENCE TECHNOLOGY, Vol.15, 2019.
  138. Kumar, R. R.; Mukhopadhyay, T.; Naskar, S.; Pandey, K. M.; Dey, S., Stochastic low-velocity impact analysis of sandwich plates including the effects of obliqueness and twist, THIN-WALLED STRUCTURES, Vol.145, 2019.
  139. Mishra, Gaurav; Mandariya, Anil Kumar; Tripathi, S. N.; Mariam; Joshi, Manish; Khan, Arshad; Sapra, B. K., Hygroscopic growth of CsI and CsOH particles in context of nuclear reactor accident research, JOURNAL OF AEROSOL SCIENCE, Vol.132, 2019.
  140. Hwang, Joonsik; Hirner, Felix Sebastian; Bae, Choongsik; Patel, Chetankumar; Gupta, Tarun; Agarwal, Avinash Kumar, HRTEM evaluation of primary soot particles originated in a small-bore biofuel compression-ignition engine, APPLIED THERMAL ENGINEERING, Vol.159, 2019.
  141. Sonar, Prasad; Modi, Sachin; Sharma, Ishan, Estimating forces during ploughing of a granular bed, JOURNAL OF FLUID MECHANICS, Vol.875, 2019.
  142. Tharayil, Abhimanyu; Banerjee, Soma; Kar, Kamal K., Dynamic mechanical properties of zinc oxide reinforced linear low density polyethylene composites, MATERIALS RESEARCH EXPRESS, Vol.6, 2019.
  143. Raj, Raunak; Guha, Anirban, On Bragg resonances and wave triad interactions in two-layered shear flows, JOURNAL OF FLUID MECHANICS, Vol.867, 2019.
  144. Medhi, Tanmoy; Yadava, Manasij Kumar; Roy, Barnik Saha; Saha, Subhash Chandra, An experimental investigation on implications of traverse speed in joining of dissimilar Al-Cu by friction stir welding, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.104, 2019.
  145. Mukherjee, Dipayan; Sharma, Ishan; Gupta, Shakti S., Dynamics and Stability of Variable-Length, Vertically-Traveling, Heavy Cables: Application to Tethered Aerostats, JOURNAL OF AIRCRAFT, Vol.56, 2019.
  146. Sundriyal, Poonam; Bhattacharya, Shantanu, Scalable Micro-fabrication of Flexible, Solid-State, Inexpensive, and High-Performance Planar Micro-supercapacitors through Inkjet Printing, ACS APPLIED ENERGY MATERIALS, Vol.2, 2019.
  147. Ramesh, S.; Nayaka, H. Shivananda; Gopi, K. R.; Sahu, Sandeep, Effect of multiaxial cryoforging on microstructure and mechanical properties of a Cu-Ti Alloy, MATERIALS RESEARCH EXPRESS, Vol.6, 2019.
  148. Bangari, Raghubeer S.; Singh, Arun K.; Namsani, Sadanandam; Singh, Jayant K.; Sinha, Niraj, Magnetite-Coated Boron Nitride Nanosheets for the Removal of Arsenic(V) from Water, ACS APPLIED MATERIALS & INTERFACES, Vol.11, 2019.
  149. Carpenter, J. R.; Guha, A., Instability of a smooth shear layer through wave interactions, PHYSICS OF FLUIDS, Vol.31, 2019.
  150. Wu, J.; Zhang, C.; Wang, Y.; Su, B.; Gond, B., Investigation on Wet Skid Resistance of Tread Rubber, EXPERIMENTAL TECHNIQUES, Vol.43, 2019.
  151. Chauhan, Pankaj Singh; Bhattacharya, Shantanu, Hydrogen gas sensing methods, materials, and approach to achieve parts per billion level detection: A review, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol.44, 2019.
  152. Bhattacharjee, Arindam; Shah, Kushal; Chatterjee, Anindya, Unifying averaged dynamics of the Fokker-Planck equation for Paul traps, PHYSICS OF PLASMAS, Vol.26, 2019.
  153. Bhandari, Ajay; Bansal, Ankit; Sing, Anup; Gupta, Rakesh Kumar; Sinha, Niraj, Comparison of transport of chemotherapeutic drugs in voxelized heterogeneous model of human brain tumor, MICROVASCULAR RESEARCH, Vol.124, 2019.
  154. Dwivedi, A. K.; Khan, Arshad; Tripathi, S. N.; Joshi, Manish; Mishra, Gaurav; Nath, Dinesh; Tiwari, Naveen; Sapra, B. K., Aerosol depositional characteristics in piping assembly under varying flow conditions, PROGRESS IN NUCLEAR ENERGY, Vol. 116, 2019.
  155. Singh, Sandeep Kumar; Akhtar, M. J.; Kar, Kamal K., Impact of Al2O3, TiO2, ZnO and BaTiO3 on the microwave absorption properties of exfoliated graphite/epoxy composites at X-band frequencies, COMPOSITES PART B-ENGINEERING, Vol. 167, 2019.
  156. Yadav, Surekha; Aggrawal, Akash; Kumar, Arvind; Biswas, Krishanu, Effect of TiB2 addition on wear behavior of (AlCrFeMnV)(90)Bi-10 high entropy alloy composite, TRIBOLOGY INTERNATIONAL, Vol. 132, 2019.
  157. Naik, Gajanan M.; Narendranath, S.; Kumar, S. S. Satheesh; Sahu, Sandeep, Effect of Annealing and Aging Treatment on Pitting Corrosion Resistance of Fine-Grained Mg-8%Al-0.5%Zn Alloy, JOM, Vol. 71, 2019.
  158. Bhola, Sahil; Sengupta, Tapan K., Roles of bulk viscosity on transonic shock-wave/boundary layer interaction, PHYSICS OF FLUIDS, Vol. 31, 2019.
  159. Sadhukhan, Shubhadeep; Samue, Roshan; Plunian, Franck; Stepanov, Rodion; Samtaney, Ravi; Varma, Mahendra Kumar, Enstrophy transfers in helical turbulence, PHYSICAL REVIEW FLUIDS, Vol. 4, 2019.
  160. Ariharan, S.; Wangaskar, Bhimashankar; Xavier, Vincent; Venkateswaran, T.; Balani, Kantesh, Process induced alignment of carbon nanotube decreases longitudinal thermal conductivity of Al2O3 based porous composites, CERAMICS INTERNATIONAL, Vol. 45, 2019.
  161. Ramesh, S.; Anne, Gajanan; Nayaka, H. Shivananda; Sahu, Sandeep; Arya, Shashibhushan, Effects of combined multiaxial forging and rolling process on microstructure, mechanical properties and corrosion behavior of a Cu-Ti alloys, MATERIALS RESEARCH EXPRESS, Vol. 6, 2019.
  162. Sharma, Nikhil; Agarwal, Rashmi A.; Agarwal, Avinash Kumar, Particulate Bound Trace Metals and Soot Morphology of Gasohol Fueled Gasoline Direct Injection Engine, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol. 141, 2019.
  163. Titov, V; Stepanov, R.; Yokoi, N.; Verma, M.; Samtaney, R., CROSS HELICITY SIGN REVERSALS IN THE DISSIPATIVE SCALES OF MAGNETOHYDRODYNAMIC TURBULENCE, MAGNETOHYDRODYNAMICS, Vol. 55, 2019.
  164. Nair, Ranjith Ravindranathan; Karki, Hamad; Shukla, Amit; Behera, Laxmidhar; Jamshidi, Mo, Fault-Tolerant Formation Control of Nonholonomic Robots Using Fast Adaptive Gain Nonsingular Terminal Sliding Mode Control, IEEE SYSTEMS JOURNAL, Vol. 13, 2019.
  165. Suman, V. K.; Viknesh, Siva S.; Tekriwal, Mohit K.; Bhaumik, Swagata; Sengupta, Tapan K., Grid sensitivity and role of error in computing a lid-driven cavity problem, PHYSICAL REVIEW E, Vol. 99, 2019.
  166. Patrikar, Jay; Makkapati, Venkata Ramana; Pattanaik, Anay; Parwana, Hardik; Kothari, Mangal, Nested Saturation Based Guidance Law for Unmanned Aerial Vehicles, JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, Vol. 141, 2019.
  167. Liu, Changran; Singh, Ajay V.; Saggese, Chiara; Tang, Quanxi; Chen, Dongping; Wan, Kevin; Vinciguerra, Marianna; Commodo, Mario; De Falco, Gianluigi; Minutolo, Patrizia; D'Anna, Andrea; Wang, Hai, Flame-formed carbon nanoparticles exhibit quantum dot behaviors, PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA, Vol. 116, 2019.
  168. Moghadam, Soroush; Saha Dalal, Indranil; Larson, Ronald G., Slip-Spring and Kink Dynamics Models for Fast Extensional Flow of Entangled Polymeric Fluids, POLYMERS, Vol. 11, 2019.
  169. Tripathi, Pragya; Ramkumar, J.; Balani, Kantesh, Laser peening enhances tribological resistance of electrodeposited Cr coatings reinforced with yttria stabilized zirconia and carbon nano tubes, SURFACE & COATINGS TECHNOLOGY, Vol. 378, 2019.
  170. Kant, Rishi; Bhatt, Geeta; Patel, Vinay Kumar; Ganguli, Anurup; Singh, Deepak; Nayak, Monalisha; Mishra, Keerti; Gupta, Ankur; Gangopadhyay, Keshab; Gangopadhyay, Shubhra; Ramanathan, Gurunath; Bhattacharya, Shantanu, Synchronized Electromechanical Shock Wave-Induced Bacterial Transformation, ACS OMEGA, Vol. 4, 2019.
  171. Patel, Chetankumar; Hwang, Joonsik; Chandra, Krishn; Agarwal, Rashmi A.; Bae, Choongsik; Gupta, Tarun; Agarwal, Avinash Kumar, In-Cylinder Spray and Combustion Investigations in a Heavy-Duty Optical Engine Fueled With Waste Cooking Oil, Jatropha, and Karanja Biodiesels, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol. 141, 2019.
  172. Gupta, Akanksha; Jayaram, Rohith; Chaterjee, Anando G.; Sadhukhan, Shubhadeep; Samtaney, Ravi; Verma, Mahendra K., Energy and enstrophy spectra and fluxes for the inertial-dissipation range of two-dimensional turbulence, PHYSICAL REVIEW E, Vol. 100, 2019.
  173. Sharma, Basant Lal; Eremeyev, Victor A., Wave transmission across surface interfaces in lattice structures, INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, Vol. 145, 2019.
  174. Bhandari, Arihant; Gupta, Prashant Kumar; Bhattacharya, Jishnu; Pala, Raj Ganesh S., Higher Energy Barrier for Interfacial Li-Ion Transfer from EC/LiPF6 Electrolyte into (010) LiFePO4 Cathode Surface than Bulk Li-Ion Diffusion within Both Cathode and Electrolyte, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, Vol. 166, 2019.
  175. Naorem, Rameshwari; Gupta, Anshul; Mantri, Sukriti; Sethi, Gurjyot; ManiKrishna, K. V.; Pala, Raj; Balani, Kantesh; Subramaniam, Anandh, A critical analysis of the X-ray diffraction intensities in concentrated multicomponent alloys, INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, Vol. 110, 2019.
  176. Gupta, Prashant Kumar; Bhandari, Arihant; Saha, Sulay; Bhattacharya, Jishnu; Pala, Raj Ganesh S., Modulating Oxygen Evolution Reactivity in MnO2 through Polymorphic Engineering, JOURNAL OF PHYSICAL CHEMISTRY C, Vol. 123, 2019.
  177. Patel, Chetankumar; Chandra, Krishn; Hwang, Joonsik; Agarwal, Rashmi A.; Gupta, Neeraj; Bae, Choongsik; Gupta, Tarun; Agarwal, Avinash Kumar, Comparative compression ignition engine performance, combustion, and emission characteristics, and trace metals in particulates from Waste cooking oil, Jatropha and Karanja oil derived biodiesels, FUEL, Vol. 236, 2019.
  178. Khobragade, Rohini; Singh, Sunit Kumar; Shukla, Pravesh Chandra; Gupta, Tarun; Al-Fatesh, Ahmed S.; Agarwal, Avinash Kumar; Labhasetwar, Nitin K., Chemical composition of diesel particulate matter and its control, CATALYSIS REVIEWS-SCIENCE AND ENGINEERING, Vol. 61, 2019.
  179. Singh, Gaganpreet; Sheokand, Harsh; Chaudhary, Kajal; Srivastava, Kumar Vaibhav; Ramkumar, J.; Ramakrishna, S. Anantha, Fabrication of a non-wettable wearable textile-based metamaterial microwave absorber, JOURNAL OF PHYSICS D-APPLIED PHYSICS, Vol. 52, 2019.
  180. Tyagi, Alekha; Yadav, Amit; Sinha, Prerna; Singh, Shashank; Paik, Pradip; Kar, Kamal K., Chicken feather rachis: An improvement over feather fiber derived electrocatalyst for oxygen electroreduction, APPLIED SURFACE SCIENCE, Vol. 495, 2019.
  181. Panigrahi, Ramanuja; Mishra, Santanu K.; Srivastava, Arpit Kumar; Basu, Sumit, Analysis, Design, and Implementation of an Elastomer Generator Based Energy Harvesting Scheme, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, Vol. 66, 2019.
  182. Eremeyev, Victor A.; Sharma, Basant Lal, Anti-plane surface waves in media with surface structure: Discrete vs. continuum model, INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, Vol. 143, 2019.
  183. Gao, Weilun; Shao, Dongdong; Wang, Zheng Bing; Nardin, William; Rajput, Prateek; Yang, Wei; Sun, Tao; Cui, Baoshan, Long-Term Cumulative Effects of Intra-Annual Variability of Unsteady River Discharge on the Progradation of Delta Lobes: A Modeling Perspective, JOURNAL OF GEOPHYSICAL RESEARCH-EARTH SURFACE, Vol. 124, 2019.
  184. Kanchwala, Husain; Chatterjee, Anindya, ADAMS model validation for an all-terrain vehicle using test track data, ADVANCES IN MECHANICAL ENGINEERING, Vol. 11, 2019.
  185. Gupta, Shashikant; Bhunia, Ritamay; Fatma, Bushara; Maurya, Deepam; Singh, Deepa; Prateek; Gupta, Rajeev; Priya, Shashank; Gupta, Raju Kumar; Garg, Ashish, Multifunctional and Flexible Polymeric Nanocomposite Films with Improved Ferroelectric and Piezoelectric Properties for Energy Generation Devices, ACS APPLIED ENERGY MATERIALS, Vol. 2, 2019.
  186. Bharathan, Bhargav; McGuinness, Maureen; Kuhar, Sharun; Kermani, Mehrdad; Hassani, Ferri P.; Sasmito, Agus P., Pressure loss and friction factor in non-Newtonian mine paste backfill: Modelling, loop test and mine field data, POWDER TECHNOLOGY, Vol. 344, 2019.
  187. Sheokand, Harsh; Singh, Gaganpreet; Ghosh, Saptarshi; Ramkumar, Janakarajan; Ramakrishna, Subramanian Anantha; Srivastava, Kumar Vaibhav, An Optically Transparent Broadband Microwave Absorber Using Interdigital Capacitance, IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, Vol. 18, 2019.
  188. Khanna, Sourav; Newar, Sanjeev; Sharma, Vashi; Reddy, K. S.; Mallick, Tapas K.; Radulovic, Jovana; Khusainov, Rinat; Hutchinson, David; Becerra, Victor, Electrical enhancement period of solar photovoltaic using phase change material, JOURNAL OF CLEANER PRODUCTION, Vol. 221, 2019.
  189. Sauer, Roger A.; Ghaffari, Reza; Gupta, Anurag, The multiplicative deformation split for shells with application to growth, chemical swelling, thermoelasticity, viscoelasticity and elastoplasticity, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol. 174, 2019.
  190. Swetha, T.; Karim, Mohammad Rezaul; Alharbi, Hamad F.; Alharthi, Nabeel H.; Bais, B.; Amin, Nowshad; Akhtaruzzaman, Md., Synthesis of new simple hole-transport materials bearing benzodithiazole based core for perovskite solar cells, SOLAR ENERGY, Vol. 194, 2019.
  191. Sarvesha, R.; Alam, W.; Gokhale, A.; Guruprasad, T. S.; Bhagavath, S.; Karagadde, S.; Jain, J.; Singh, S. S., Quantitative assessment of second phase particles characteristics and its role I on the deformation response of a Mg-8Al-0.5Zn alloy, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 759, 2019.
  192. Jangir, Himanshi; Bhardwaj, Amarjeet; Ramkumar, Janakarajan; Sarkar, Sabyasachi; Das, Mainak, Induced Electron Transfer in Silk Cocoon Derived N-Doped Reduced Graphene Oxide-Mo-Li-S Electrode, FRONTIERS IN MATERIALS, Vol. 6, 2019.
  193. Singh, Sandeep Kumar; Tiwari, Nilesh Kumar; Yadav, Amit Kumar; Akhtar, M. Jaleel; Kar, Kamal K., Design of ZnO/N-Doped Graphene Nanohybrid Incorporated RF Complementary Split Ring Resonator Sensor for Ammonia Gas Detection, IEEE SENSORS JOURNAL, Vol. 19, 2019.
  194. Pal, Subhashis; Porwal, Konica; Khanna, Kunal; Gautam, Manoj Kumar; Malik, Mohd Yaseen; Rashid, Mamunur; Macleod, R. John; Wahajuddin, Muhammad; Parameswaran, Venkitanarayanan; Bellare, Jayesh R.; Chattopadhyay, Naibedya, Oral dosing of pentoxifylline, a pan-phosphodiesterase inhibitor restores bone mass and quality in osteopenic rabbits by an osteogenic mechanism: A comparative study with human parathyroid hormone, BONE, Vol. 123, 2019.
  195. Bhattacharya, Pallab; Lee, Joong Hee; Kar, Kamal K.; Park, Ho Seok, Carambola-shaped SnO2 wrapped in carbon nanotube network for high volumetric capacity and improved rate and cycle stability of lithium ion battery, CHEMICAL ENGINEERING JOURNAL, Vol. 369, 2019.
  196. Ramesh, Srinivasagam; Bhuvaneshwari, B.; Palani, G. S.; Lal, D. Mohan; Mondal, K.; Gupta, Raju Kumar, Enhancing the corrosion resistance performance of structural steel via a novel deep cryogenic treatment process, VACUUM, Vol. 1592019.
  197. Kumar, Rajesh; Sahoo, Sumanta; Joanni, Ednan; Singh, Rajesh Kumar; Tan, Wai Kian; Kar, Kamal Krishna; Matsuda, Atsunori, Recent progress in the synthesis of graphene and derived materials for next generation electrodes of high performance lithium ion batteries, PROGRESS IN ENERGY AND COMBUSTION SCIENCE, Vol. 752019.
2018
  1. Nagdeve, Leeladhar; Sidpara, Ajay; Jain, V. K.; Ramkumar, J., On the effect of relative size of magnetic particles and abrasive particles in MR fluid-based finishing process, MACHINING SCIENCE AND TECHNOLOGY, Vol.22, 2018. 
  2. Tyagi, Aakash; Sharma, Vyom; Jain, V. K.; Ramkumar, J., Investigations into side gap in wire electrochemical micromachining (wire-ECMM), INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.94, 2018. 
  3. Soni, Vikram; Kumar, Arvind; Jain, V. K., Modeling of PCM melting: Analysis of discrepancy between numerical and experimental results and energy storage performance, ENERGY, Vol.150, 2018. 
  4. Soni, Vikram; Kumar, Arvind; Jain, V. K., Performance evaluation of nano-enhanced phase change materials during discharge stage in waste heat recovery, RENEWABLE ENERGY, Vol.127, 2018. 
  5. Voruganti, Hari K.; Dasgupta, Bhaskar, A novel volumetric criterion for optimal shape matching of surfaces for protein-protein docking, JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING, Vol.5, 2018. 
  6. Kumar, Vikram; Sinha, Sujeet K.; Agarwal, Avinash K., Tribological studies of dual-coating (intermediate hard with top epoxy-graphene-base oil composite layers) on tool steel in dry and lubricated conditions, TRIBOLOGY INTERNATIONAL, Vol.127, 2018. 
  7. Jhodkar, Durwesh; Amarnath, M.; Chelladurai, H.; Ramkumar, J., Experimental Investigations to Study the Effects of Microwave Treatment Strategy on Tool Performance in Turning Operation, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol.27, 2018. 
  8. Chauhan, Pankaj Singh; Bhattacharya, Shantanu, Highly sensitive V2O5 center dot 1.6H2)O nanostructures for sensing of helium gas at room temperature, MATERIALS LETTERS, Vol.217, 2018. 
  9. Desai, Chaitanya K.; Parameswaran, Venkitanarayanan; Basu, Sumit, Formulating a cohesive zone model for thin polycarbonate sheets using the concept of the essential work of fracture, ENGINEERING FRACTURE MECHANICS, Vol.201, 2018. 
  10. Chanda, Samarjeet; Muralidhar, K.; Nimdeo, Yogesh M., Joint estimation of thermal and mass diffusivities of a solute-solvent system using ANN-GA based inverse framework, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol.123, 2018. 
  11. Sharma, Basant Lal, On prototypical wave transmission across a junction of waveguides with honeycomb structure, ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK, Vol.69, 2018. 
  12. Mistry, Aashutosh; Muralidhar, K., Spreading of a pendant liquid drop underneath a textured substrate, PHYSICS OF FLUIDS, Vol.30, 2018. 
  13. Punetha, Maneesh; Choudhary, Ajay; Khandekar, Sameer, Stratification and mixing dynamics of helium in an air filled confined enclosure, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol.43, 2018. 
  14. Agrawal, Ashish; Ghoshdastidar, P. S., Computer Simulation of Heat Transfer in a Rotary Lime Kiln, JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol.10, 2018. 
  15. Sharma, Basant Lal, Electronic transport across a junction between armchair graphene nanotube and zigzag nanoribbon, EUROPEAN PHYSICAL JOURNAL B, Vol.91, 2018. 
  16. Das, Santanu; Wahi, Pankaj, Energy extraction from vortex-induced vibrations using period-1 rotation of an autoparametric pendulum, PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, Vol.474, 2018. 
  17. Jose, Kevin; Chatterjee, Anindya; Gupta, Anurag, Acoustics of Idakka: An Indian snare drum with definite pitch, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, Vol.143, 2018. 
  18. Swain, Digendranath; Gupta, Anurag, Biological growth in bodies with incoherent interfaces, PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, Vol.474, 2018. 
  19. Biswas, Saurabh; Chatterjee, Anindya, A two-state hysteresis model for bolted joints, with minor loops from partial unloading, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol.140, 2018. 
  20. Agarwal, Avinash Kumar; Gadekar, Suresh; Singh, Akhilendra Pratap, In-Cylinder Flow Evolution Using Tomographic Particle Imaging Velocimetry in an Internal Combustion Engine, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.140, 2018. 
  21. Singh, Sachin K.; Srinivasan, Vyas; Wangaskar, Bhimashankar; Khandekar, Sameer, Dynamic Evolution of an Evaporating Liquid Meniscus from Structured Screen Meshes, TRANSPORT IN POROUS MEDIA, Vol.121, 2018. 
  22. Jain, V. K.; Chouksey, Ankit Kumar, A comprehensive analysis of three-phase electrolyte conductivity during electrochemical macromachining/micromachining, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol.232, 2018. 
  23. Pisharody, Rahul; Gupta, Anurag, Experimental Investigations of Tanpura Acoustics, ACTA ACUSTICA UNITED WITH ACUSTICA, Vol.104, 2018. 
  24. Upadhyay, R. K.; Kumar, A., A novel approach to minimize dry sliding friction and wear behavior of epoxy by infusing fullerene C-70 and multiwalled carbon nanotubes, TRIBOLOGY INTERNATIONAL, Vol.120, 2018. 
  25. Gupta, Sunit K.; Wahi, Pankaj, Criticality of bifurcation in the tuned axial-torsional rotary drilling model, NONLINEAR DYNAMICS, Vol.91, 2018. 
  26. Orra, Kashfull; Choudhury, Sounak K., Tribological aspects of various geometrically shaped micro-textures on cutting insert to improve tool life in hard turning process, JOURNAL OF MANUFACTURING PROCESSES, Vol.31, 2018. 
  27. Usmani, Abdullah Y.; Muralidhar, K., Flow in an intracranial aneurysm model: effect of parent artery orientation, JOURNAL OF VISUALIZATION, Vol.21, 2018. 
  28. Mishra, Ashish Kumar; Aggarwal, Akash; Kumar, Arvind; Sinha, Niraj, Identification of a suitable volumetric heat source for modelling of selective laser melting of Ti6Al4V powder using numerical and experimental validation approach, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.99, 2018. 
  29. Roychowdhury, Ayan; Gupta, Anurag, On Structured Surfaces with Defects: Geometry, Strain Incompatibility, Stress Field, and Natural Shapes, JOURNAL OF ELASTICITY, Vol.131, 2018. 
  30. Khan, Sanan H.; Sharma, Ankush P., Progressive damage modeling and interface delamination of cross-ply laminates subjected to low-velocity impact, JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, Vol.53, 2018. 
  31. Mannan, Sayyad; Parameswaran, Venkitanarayanan; Basu, Sumit, Stiffness and toughness gradation of bamboo from a damage tolerance perspective, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol.143, 2018. 
  32. Aggarwal, Akash; Kumar, Arvind, Particle Scale Modelling of Selective Laser Melting-Based Additive Manufacturing Process Using Open-Source CFD Code OpenFOAM, TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol.71, 2018. 
  33. Somwanshi, Praveen M.; Muralidhar, K.; Khandekar, Sameer, Coalescence dynamics of sessile and pendant liquid drops placed on a hydrophobic surface, PHYSICS OF FLUIDS, Vol.30, 2018. 
  34. Sharma, Ankush P.; Khan, Sanan H., Influence of metal layer distribution on the projectiles impact response of glass fiber reinforced aluminum laminates, POLYMER TESTING, Vol.70, 2018. 
  35. Gautam, Ankit Kumar; Kumar, Sunil; Panigrahi, Pradipta Kumar, Porous shroud tube design evaluation of a control plug in a liquid metal cooled reactor, APPLIED THERMAL ENGINEERING, Vol.139, 2018. 
  36. Bharti, Omprakash S.; Saha, Arun K.; Das, Malay K.; Bansal, Sohil, Simultaneous measurement of velocity and temperature fields during natural convection in a water-filled cubical cavity, EXPERIMENTAL THERMAL AND FLUID SCIENCE, Vol.99, 2018. 
  37. Yadav, Mahesh Kumar; Singh, Sachin K.; Parwez, Ahsen; Khandekar, Sameer, Inverse models for transient wall heat flux estimation based on single and multi-point temperature measurements, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol.124, 2018. 
  38. Srivastava, Dhananjay Kumar; Agarwal, Avinash Kumar, Combustion characteristics of a variable compression ratio laser-plasma ignited compressed natural gas engine, FUEL, Vol.214, 2018. 
  39. Murugan, Thangadurai; Dora, Chandrala Lakshmana; De, Sudipta; Das, Debopam, A comparative three-dimensional study of impulsive flow emanating from a shock tube for shock Mach number 1.6, JOURNAL OF VISUALIZATION, Vol.21, 2018. 
  40. Satsangi, Dev Prakash; Tiwari, Nachiketa, Experimental investigation on combustion, noise, vibrations, performance and emissions characteristics of diesel/n-butanol blends driven genset engine, FUEL, Vol.221, 2018. 
  41. Singh, Akhilendra Pratap; Agarwal, Avinash Kumar, Experimental evaluation of sensitivity of low-temperature combustion to intake charge temperature and fuel properties, INTERNATIONAL JOURNAL OF ENGINE RESEARCH, Vol.19, 2018. 
  42. Patel, Divyansh; Jain, V. K.; Ramkumar, J., Micro texturing on metallic surfaces: State of the art, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol.232, 2018. 
  43. Singh, Akhilendra Pratap; Bajpai, Nikhil; Agarwal, Avinash Kumar, Combustion Mode Switching Characteristics of a Medium-Duty Engine Operated in Compression Ignition/PCCI Combustion Modes, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.140, 2018. 
  44. Balija, Santhosh Kumar; Biswas, Saurabh; Chatterjee, Anindya, Stability aspects of the Hayes delay differential equation with scalable hysteresis, NONLINEAR DYNAMICS, Vol.93, 2018. 
  45. Agarwal, Avinash Kumar; Singh, Akhilendra Pratap; Maurya, Rakesh Kumar; Shukla, Pravesh Chandra; Dhar, Atul; Srivastava, Dhananjay Kumar, Combustion characteristics of a common rail direct injection engine using different fuel injection strategies, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol.134, 2018. 
  46. Reddy, Sarveshwar M.; Sharma, Nikhil; Gupta, Neeraj; Agarwal, Avinash Kumar, Effect of non-edible oil and its biodiesel on wear of fuel injection equipment components of a genset engine, FUEL, Vol.222, 2018. 
  47. Guha, Anirban; Raj, Raunak, On the inertial effects of density variation in stratified shear flows, PHYSICS OF FLUIDS, Vol.30, 2018. 
  48. Kar, Subhajit; Guha, Anirban, Letter: Ocean bathymetry reconstruction from surface data using hydraulics theory, PHYSICS OF FLUIDS, Vol.30, 2018. 
  49. Raj, Arindam; Mokhalingam, Aningi; Gupta, Shakti S., Instabilities in carbon nanocone stacks, CARBON, Vol.127, 2018. 
  50. Sharma, Ankush P.; Khan, Sanan H.; Kitey, Rajesh; Parameswaran, Venkitanarayanan, Effect of through thickness metal layer distribution on the low velocity impact response of fiber metal laminates, POLYMER TESTING, Vol.65, 2018. 
  51. Gopi, K. R.; Nayaka, H. Shivananda; Sahu, Sandeep, Corrosion Behavior of ECAP-Processed AM90 Magnesium Alloy, ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, Vol.43, 2018. 
  52. Veettil, Sachin Krishnan Thekke; Das, Sovan Lal; Balagopal, Sunil Kumar Palakurissi, Interplay of Curvature Sensing and Generation Mediated by Peripheral Membrane Proteins, BIOPHYSICAL JOURNAL, Vol.114, 2018. 
  53. Khan, Sanan H.; Sharma, Ankush P.; Kitey, Rajesh; Parameswaran, Venkitanarayanan, Effect of metal layer placement on the damage and energy absorption mechanisms in aluminium/glass fibre laminates, INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, Vol.119, 2018. 
  54. Siddique, M. Hamid; Afzal, Arshad; Samad, Abdus, Design Optimization of the Centrifugal Pumps via Low Fidelity Models, MATHEMATICAL PROBLEMS IN ENGINEERING, Vol.2018, 2018. 
  55. Kumar, P. Arun; Kumar, S. M. Aravindh; Mitra, A. Surya; Rathakrishnan, E., Fluidic injectors for supersonic jet control, PHYSICS OF FLUIDS, Vol.30, 2018. 
  56. Agarwal, Avinash Kumar; Park, Sungwook; Dhar, Atul; Lee, Chang Sik; Park, Suhan; Gupta, Tarun; Gupta, Neeraj K., Review of Experimental and Computational Studies on Spray, Combustion, Performance, and Emission Characteristics of Biodiesel Fueled Engines, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.140, 2018. 
  57. Jithin, M.; Kumar, Nimish; De, Ashoke; Das, Malay K., Pore-Scale Simulation of Shear Thinning Fluid Flow Using Lattice Boltzmann Method, TRANSPORT IN POROUS MEDIA, Vol.121, 2018. 
  58. Bhattacharjee, Arindam; Chatterjee, Anindya, Transverse impact of a Hertzian body with an infinitely long Euler-Bernoulli beam, JOURNAL OF SOUND AND VIBRATION, Vol.429, 2018. 
  59. Afzal, Arshad; Ansari, Mubashshir A.; Kim, Kwang-Yong, Editorial for the Special Issue on Passive Micromixers, MICROMACHINES, Vol.9, 2018. 
  60. Banerjee, A.; Calius, E. P.; Das, R., Impact based wideband nonlinear resonating metamaterial chain, INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, Vol.103, 2018. 
  61. Sharma, Vyom; Srivastava, Ishan; Tyagi, Aakash; Jain, V. K.; Ramkumar, J., Theoretical and Experimental Investigations into Wire Electrochemical Turning (Wire-ECTrg) Process Using Finite Element Method, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, Vol.165, 2018. 
  62. Kumar, Arun; Sudarkodi, V.; Parandekar, Priya V.; Sinha, Nishant K.; Prakash, Om; Nair, Nisanth N.; Basu, Sumit, Adhesion between a rutile surface and a polyimide: a coarse grained molecular dynamics study, MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, Vol.26, 2018. 
  63. Shinde, Sachin Y.; Arakeri, Jaywant H., Physics of unsteady thrust and flow generation by a flexible surface flapping in the absence of a free stream, PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, Vol.474, 2018. 
  64. Singh, Sachin; Sankar, Mamilla Ravi; Jain, V. K., Simulation and experimental investigations into abrasive flow nanofinishing of surgical stainless steel tubes, MACHINING SCIENCE AND TECHNOLOGY, Vol.22, 2018. 
  65. Banerjee, Arnab; Calius, Emilio P.; Das, Raj, An impact based mass-in-mass unit as a building block of wideband nonlinear resonating metamaterial, INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, Vol.101, 2018. 
  66. Shete, Mihir H.; Guha, Anirban, Effect of free surface on submerged stratified shear instabilities, JOURNAL OF FLUID MECHANICS, Vol.843, 2018. 
  67. Kumar, Rudra; Agrawal, Aman; Bhuvana, Thiruvelu; Sharma, Ashutosh, Porous indium oxide hollow spheres (PIOHS) for asymmetric electrochemical supercapacitor with excellent cycling stability, ELECTROCHIMICA ACTA, Vol.270, 2018. 
  68. Kumar, Rudra; Bhuvana, Thiruvelu; Rai, Prabhakar; Sharma, Ashutosh, Highly Sensitive Non-Enzymatic Glucose Detection Using 3-D Ni-3(VO4)2) Nanosheet Arrays Directly Grown on Ni Foam, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, Vol.165, 2018. 
  69. Jhodkar, Durwesh; Amarnath, M.; Chelladurai, H.; Ramkumar, J., Experimental investigations to enhance the machining performance of tungsten carbide tool insert using microwave treatment process, JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, Vol.40, 2018. 
  70. Kumar, Mahesh; Srivastava, S. C.; Singh, S. N.; Ramamoorty, M., Development of a new control strategy based on two revolving field theory for single-phase VCVSI integrated to DC microgrid, INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS, Vol.98, 2018. 
  71. Vardhaman, B. S. Ajay; Amarnath, M.; Ramkumar, J.; Rai, Prabhat K., Experimental Investigations to Enhance the Tribological Performance of Engine Oil by Using Nano-Boric Acid and Functionalized Multiwalled Carbon Nanotubes: A Comparative Study to Assess Wear in Bronze Alloy, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol.27, 2018. 
  72. Panigrahi, Devi Prasad; Das, Sayan; Chakraborty, Suman, Deformation of a surfactant-laden viscoelastic droplet in a uniaxial extensional flow, PHYSICS OF FLUIDS, Vol.30, 2018. 
  73. Gupta, Sunit K.; Wahi, Pankaj, Tuned dynamics stabilizes an idealized regenerative axial-torsional model of rotary drilling, JOURNAL OF SOUND AND VIBRATION, Vol.412, 2018. 
  74. Nair, Dileep V.; Ghoshdastidar, P. S., A comparative study of 2-D and 3-D conjugate natural convection from a vertical rectangular fin array with multilayered base subjected to distributed high heat flux, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol.121, 2018. 
  75. Pradhan, Tapan Kumar; Panigrahi, Pradipta Kumar, Hydrodynamics of Two Interacting Liquid Droplets of Aqueous Solution inside a Microchannel, LANGMUIR, Vol.34, 2018. 
  76. Pradhan, Tapan Kumar; Panigrahi, Pradipta Kumar, Convection inside condensing and evaporating droplets of aqueous solution, SOFT MATTER, Vol.14, 2018. 
  77. Gautam, Ankit K.; Agarwal, Nishant K.; Panigrahi, Pradipta K., Jet breaker plate for suppressing gas entrainment and flow induced vibration of a CSRDM shroud tube assembly inside the control plug shell, NUCLEAR ENGINEERING AND DESIGN, Vol.340, 2018. 
  78. Shukla, Rajesh Kumar; Patel, Virendra; Kumar, Arvind, Modeling of Rapid Solidification with Undercooling Effect During Droplet Flattening on a Substrate in Coating Formation, JOURNAL OF THERMAL SPRAY TECHNOLOGY, Vol.27, 2018. 
  79. Babu, Abhishek; Arora, H. S.; Behera, Sailesh N.; Sharma, Mukesh; Grewal, H. S., Towards highly durable bimodal composite claddings using microwave processing, SURFACE & COATINGS TECHNOLOGY, Vol.349, 2018. 
  80. Khanna, Sourav; Newar, Sanjeev; Sharma, Vashi; Panigrahi, Pradipta Kumar; Mallick, Tapas K., Deformation of receiver in solar parabolic trough collector due to non uniform temperature and solar flux distribution and use of bimetallic absorber tube with multiple supports, ENERGY, Vol.165, 2018. 
  81. Sankar, H. Ravi; Parameswaran, Venkitanarayanan, Effect of circular perforations on the progressive collapse of circular cylinders under axial impact, INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, Vol.122, 2018. 
  82. Awasthi, Shikha; Pal, Vijay Kumar; Choudhury, S. K., Effect of surface modifications by abrasive water jet machining and electrophoretic deposition on tribological characterisation of Ti6Al4V alloy, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.96, 2018. 
  83. Sharma, Basant Lal, On linear waveguides of zigzag honeycomb lattice, WAVES IN RANDOM AND COMPLEX MEDIA, Vol.28, 2018. 
  84. Khanna, Sourav; Sharma, Vashi; Newar, Sanjeev; Mallick, Tapas K.; Panigrahi, Pradipta Kumar, Thermal stress in bimetallic receiver of solar parabolic trough concentrator induced due to non uniform temperature and solar flux distribution, SOLAR ENERGY, Vol.176, 2018. 
  85. Somwanshi, Praveen M.; Muralidhar, K.; Khandekar, Sameer, Dropwise condensation patterns of bismuth formed on horizontal and vertical surfaces, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol.122, 2018. 
  86. Sudarkodi, V.; Sooraj, K.; Nair, Nisanth N.; Basu, Sumit; Parandekar, Priya V.; Sinha, Nishant K.; Prakash, Om; Tsotsis, Tom, Mechanical response of two polyimides through coarse-grained molecular dynamics simulations, MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, Vol.26, 2018. 
  87. Shah, Ambuj; Kumar, Arvind; Ramkumar, J., Analysis of transient thermo-fluidic behavior of melt pool during spot laser welding of 304 stainless-steel, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol.256, 2018. 
  88. Anoop, K. V.; Singh, Om Pal, The build-up and characterization of nuclear burn-up wave in a fast neutron multiplying medium, SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, Vol.43, 2018. 
  89. Bhandari, Ajay; Bansal, Ankit; Singh, Anup; Sinha, Niraj, Numerical Study of Transport of Anticancer Drugs in Heterogeneous Vasculature of Human Brain Tumors Using Dynamic Contrast Enhanced-Magnetic Resonance Imaging, JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, Vol.140, 2018. 
  90. Bhattacharya, Shashwat; Pandey, Ambrish; Kumar, Abhishek; Verma, Mahendra K., Complexity of viscous dissipation in turbulent thermal convection, PHYSICS OF FLUIDS, Vol.30, 2018. 
  91. Kumar, Alok; Tiwari, Vipul; Kumar, Arvind, A Study of Solidification During Ice Slurry Generation in an Inclined Rectangular Cavity, TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol.71, 2018. 
  92. Sagar, S. M. V.; Agarwal, Avinash Kumar, Knocking behavior and emission characteristics of a port fuel injected hydrogen enriched compressed natural gas fueled spark ignition engine, APPLIED THERMAL ENGINEERING, Vol.141, 2018. 
  93. Vasukiran, Mandava; Kishore, Nanda; Yadav, Shakti, Critical Reynolds numbers of shear-thinning fluids flow past unbounded spheres, POWDER TECHNOLOGY, Vol.339, 2018. 
  94. Sengupta, Aditi; Ghoshdastidar, P. S., Heat Transfer Enhancement in Ferrofluids Flow in Micro and Macro Parallel Plate Channels: A Comparative Numerical Study, JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol.10, 2018. 
  95. De, Souradip; Sahoo, Soumya Ranjan; Wahi, Pankaj, Trajectory Tracking Control with Heterogeneous Input Delay in Multi-Agent System, JOURNAL OF INTELLIGENT & ROBOTIC SYSTEMS, Vol.92, 2018. 
  96. Sampath, Ramesh; Nayaka, Hanumanthappa Shivananda; Gopi, Karekere Rangaraju; Sahu, Sandeep; Kuruveri, Udaya Bhat, Investigation of microstructure and mechanical properties of the Cu-3% Ti alloy processed by multiaxial cryo-forging, JOURNAL OF MATERIALS RESEARCH, Vol.33, 2018. 
  97. Gupta, Prashant Kumar; Bhandari, Arihant; Bhattacharya, Jishnu; Pala, Raj Ganesh S., Correlating Voltage Profile to Molecular Transformations in Ramsdellite MnO2 and Its Implication for Polymorph Engineering of Lithium Ion Battery Cathodes, JOURNAL OF PHYSICAL CHEMISTRY C, Vol.122, 2018. 
  98. Kumar, Sanjay; Bhushan, Pulak; Prakash, Om; Bhattacharya, Shantanu, Double negative acoustic metastructure for attenuation of acoustic emissions, APPLIED PHYSICS LETTERS, Vol.112, 2018. 
  99. Singh, Sandeep Kumar; Akhtar, Mohammad Jaleel; Kar, Kamal K., Hierarchical Carbon Nanotube-Coated Carbon Fiber: Ultra Lightweight, Thin, and Highly Efficient Microwave Absorber, ACS APPLIED MATERIALS & INTERFACES, Vol.10, 2018. 
  100. Patel, Divyansh Singh; Singh, Abhilasha; Balani, K.; Ramkumar, J., Topographical effects of laser surface texturing on various time-dependent wetting regimes in Ti6Al4V, SURFACE & COATINGS TECHNOLOGY, Vol.349, 2018. 
  101. Gautam, Ankit Kumar; Panigrahi, Pradipta Kumar; Velusamy, Karuppanna, Flow structures associated with CSRDM shroud tube and control rod assembly: A combined experimental and simulation study, PROGRESS IN NUCLEAR ENERGY, Vol.109, 2018. 
  102. Nair, Vineet; Sharma, Ishan; Shankar, V, Planar equilibria of sessile and pendant liquid drops on geometrically non-linear elastic membranes, PHYSICS OF FLUIDS, Vol.30, 2018. 
  103. Kumar, Rudra; Bhuvana, Thiruvelu; Sharma, Ashutosh, Tire Waste Derived Turbostratic Carbon as an Electrode for a Vanadium Redox Flow Battery, ACS SUSTAINABLE CHEMISTRY & ENGINEERING, Vol.6, 2018. 
  104. Vardhaman, B. S. Ajay; Amarnath, M.; Jhodkar, Durwesh; Ramkumar, J.; Chelladurai, H.; Roy, M. K., Influence of coconut oil on tribological behavior of carbide cutting tool insert during turning operation, JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, Vol.40, 2018. 
  105. Yadav, Surekha; Kumar, Arvind; Biswas, Krishanu, Wear behavior of high entropy alloys containing soft dispersoids (Pb, Bi), MATERIALS CHEMISTRY AND PHYSICS, Vol.210, 2018. 
  106. Gupta, Prince, Controlling Level Splitting by Strong Coupling of Surface Plasmon Resonances with Rhodamine-6G on a Gold Grating (vol 13, pg 2067, 2018), PLASMONICS, Vol.13, 2018. 
  107. Punati, V. S.; Sharma, I.; Wahi, P., Indentation of adhesive beams, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol.141, 2018. 
  108. Gayner, Chhatrasal; Kar, Kamal K.; Kim, Woochul, Recent progress and futuristic development of PbSe thermoelectric materials and devices, MATERIALS TODAY ENERGY, Vol.9, 2018. 
  109. Sen, Novonil; Gupta, Vinay K., On estimation of seismic damage from ductility and hysteretic energy demands in equivalent oscillators using linear response, ENGINEERING STRUCTURES, Vol.172, 2018. 
  110. Dharmadhikari, Susheel; Chatterjee, Anindya, An engineering-design oriented exploration of human excellence in throwing, SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, Vol.43, 2018. 
  111. Sharma, Rahul Swarup; Singhal, Ishant; Gupta, Shivam, Innovative Training Framework for Additive Manufacturing Ecosystem to Accelerate Adoption of Three-Dimensional Printing Technologies, 3D PRINTING AND ADDITIVE MANUFACTURING, Vol.5, 2018. 
  112. Neetu; Singh, Subhash; Rao, P. Nageshwar; Jayaganathan, R.; Midathada, A.; Verma, Kartikey; Ravella, Uday K., Elevated corrosion in strain hardened Al-Mg alloy, VACUUM, Vol.157, 2018. 
  113. Bangari, Raghubeer Singh; Sahu, Sandeep; YadaV, Prabhat Chand, Comparative evaluation of hot corrosion resistance of nanostructured AlCrN and TiAlN coatings on cobalt-based superalloys, JOURNAL OF MATERIALS RESEARCH, Vol.33, 2018. 
  114. Pandey, Aditi; Patel, Anup Kumar; Ariharan, S.; Kumar, Vikram; Sharma, Rajeev Kumar; Kanhed, Satish; Nigam, Vinod Kumar; Keshri, Anup; Agarwal, Arvind; Balani, Kantesh, Enhanced Tribological and Bacterial Resistance of Carbon Nanotube with Ceria- and Silver-Incorporated Hydroxyapatite Biocoating, NANOMATERIALS, Vol.8, 2018. 
  115. Agarwal, Avinash Kumar; Singh, Akhilendra P.; Gupta, Tarun; Agarwal, Rashmi A.; Sharma, Nikhil; Rajput, Prashant; Pandey, Swaroop K.; Ateeq, Bushra, Mutagenicity and Cytotoxicity of Particulate Matter Emitted from Biodiesel-Fueled Engines, ENVIRONMENTAL SCIENCE & TECHNOLOGY, Vol.52, 2018. 
  116. Nagdeve, Leeladhar; Jain, V. K.; Ramkumar, J., Differential finishing of freeform surfaces (knee joint) using R-MRAFF process and negative replica of workpiece as a fixture, MACHINING SCIENCE AND TECHNOLOGY, Vol.22, 2018. 
  117. Jhodkar, Durwesh; Amarnath, M.; Chelladurai, H.; Ramkumar, J., Performance assessment of microwave treated WC insert while turning AISI 1040 steel, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, Vol.32, 2018. 
  118. Singh, Sandeep Kumar; Prakash, Hari; Akhtar, M. J.; Kar, Kamal K., Lightweight and High-Performance Microwave Absorbing Heteroatom-Doped Carbon Derived from Chicken Feather Fibers, ACS SUSTAINABLE CHEMISTRY & ENGINEERING, Vol.6, 2018. 
  119. Yadav, Deepak Kumar; Gupta, Amitava; Munshi, Prabhat, Non linear Dynamic Inversion based controller design for load following operations in Pressurized Water Reactors with bounded Xenon oscillations, NUCLEAR ENGINEERING AND DESIGN, Vol.328, 2018. 
  120. Sharma, Vyom; Patel, Divyansh Singh; Jain, V. K.; Ramkumar, J.; Tyagi, Akash, Wire Electrochemical Threading: A Technique for Fabricating Macro/Micro Thread Profiles, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, Vol.165, 2018. 
  121. Orra, Kashfull; Choudhury, Sounak K., Mechanistic modelling for predicting cutting forces in machining considering effect of tool nose radius on chip formation and tool wear land, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol.142, 2018. 
  122. Gupta, Sunit K.; Wahi, Pankaj, Bifurcations in the axial-torsional state-dependent delay model of rotary drilling, INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, Vol.99, 2018. 
  123. Khechai, A.; Tati, A.; Guerira, B.; Guettala, A.; Mohite, P. M., Strength degradation and stress analysis of composite plates with circular, square and rectangular notches using digital image correlation, COMPOSITE STRUCTURES, Vol.185, 2018. 
  124. Kishore, Rahul; Choudhury, Sounak K.; Orra, Kashfull, On-line control of machine tool vibration in turning operation using electro-magneto rheological damper, JOURNAL OF MANUFACTURING PROCESSES, Vol.31, 2018. 
  125. Chouhan, Arvind; Aggarwal, Akash; Kumar, Arvind, Model Development in OpenFOAM for Laser Metal Deposition-based Additive Manufacturing Process, TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol.71, 2018. 
  126. Gupta, Gaurav; Dutta, Ashish, Trajectory generation and step planning of a 12 DoF biped robot on uneven surface, ROBOTICA, Vol.36, 2018. 
  127. Khatik, Vitthal M.; Nandi, Arup Kr., A generic method for rock mass classification, JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING, Vol.10, 2018. 
  128. Prakash, Chander; Singh, Sunpreet; Verma, Kartikey; Sidhu, Sarabjeet S.; Singh, Subhash, Synthesis and characterization of Mg-Zn-Mn-HA composite by spark plasma sintering process for orthopedic applications, VACUUM, Vol.155, 2018. 
  129. Agarwal, Avinash K.; Ateeq, Bushra; Gupta, Tarun; Singh, Akhilendra P.; Pandey, Swaroop K.; Sharma, Nikhil; Agarwal, Rashmi A.; Gupta, Neeraj K.; Sharma, Hemant; Jain, Ayush; Shukla, Pravesh C., Toxicity and mutagenicity of exhaust from compressed natural gas: Could this be a clean solution for megacities with mixed-traffic conditions?, ENVIRONMENTAL POLLUTION, Vol.239, 2018. 
  130. Verma, Dinkar; Paul, Subhanker; Wahi, Pankaj, Stability and Bifurcation Characteristics of a Forced Circulation BWR Using a Nuclear-Coupled Homogeneous Thermal-Hydraulic Model, NUCLEAR SCIENCE AND ENGINEERING, Vol.190, 2018. 
  131. Jhodkar, Durwesh; Chelladurai, H.; Choudhary, Akhilesh Kumar; Ramkumar, J., Comparison of machining performance of microwave post-heated WC insert with dry, wet and MQL cutting in turning operation, JOURNAL OF MICROWAVE POWER AND ELECTROMAGNETIC ENERGY, Vol.52, 2018. 
  132. Shukla, Pragya; Awasthi, Shikha; Ramkumar, Janakarajan; Balani, Kantesh, Protective trivalent Cr-based electrochemical coatings for gun barrels, JOURNAL OF ALLOYS AND COMPOUNDS, Vol.768, 2018. 
  133. Kumar, Hitendra; Ramkumar, J.; Venkatesh, K. S., Surface texture evaluation using 3D reconstruction from images by parametric anisotropic BRDF, MEASUREMENT, Vol.125, 2018. 
  134. Singh, Akhilendra Pratap; Agarwal, Avinash Kumar, Evaluation of Fuel Injection Strategies for Biodiesel-Fueled CRDI Engine Development and Particulate Studies, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.140, 2018. 
  135. Bhardwaj, Divyanshu; Guha, Anirban, Nonlinear modeling of stratified shear instabilities, wave breaking, and wave-topography interactions using vortex method, PHYSICS OF FLUIDS, Vol.30, 2018. 
  136. Malik, Iram; Banerjee, Soma; Gayner, Chhatrasal; Chowdhuri, Abhijnan; Kar, Kamal K., Synthesis and thermoelectric performance of titanium diboride and its composites with lead selenide and carbon, CERAMICS INTERNATIONAL, Vol.44, 2018. 
  137. Babu, R.; Das, Malay K., Effects of surface-active agents on bubble growth and detachment from submerged orifice, CHEMICAL ENGINEERING SCIENCE, Vol.179, 2018. 
  138. Verma, M. K.; Kumar, A.; Kumar, P.; Barman, S.; Chatterjee, A. G.; Samtaney, R.; Stepanov, R. A., Energy Spectra and Fluxes in Dissipation Range of Turbulent and Laminar Flows, FLUID DYNAMICS, Vol.53, 2018. 
  139. Kumar, Sanjay; Bhushan, Pulak; Krishna, Vinay; Bhattacharya, Shantanu, Tapered lateral flow immunoassay based point-of-care diagnostic device for ultrasensitive colorimetric detection of dengue NS1, BIOMICROFLUIDICS, Vol.12, 2018. 
  140. Dehadrai, Abhinav Ravindra; Sharma, Ishan; Gupta, Shakti S., Stability of Vertically Traveling, Pre-tensioned, Heavy Cables, JOURNAL OF COMPUTATIONAL AND NONLINEAR DYNAMICS, Vol.13, 2018. 
  141. Sharma, Shashank; Mandal, Vijay; Ramakrishna, S. A.; Ramkumar, J., Numerical simulation of melt hydrodynamics induced hole blockage in Quasi-CW fiber laser micro-drilling of TiAl6V4, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol.262, 2018. 
  142. Kumar, Prem; Wangaskar, Bhimashankar; Khandekar, Sameer; Balani, Kantesh, Thermal-fluidic transport characteristics of bi-porous wicks for potential loop heat pipe systems, EXPERIMENTAL THERMAL AND FLUID SCIENCE, Vol.94, 2018. 
  143. Vashishtha, Sumit; Verma, Mahendra K.; Samuel, Roshan, Large-eddy simulations of turbulent thermal convection using renormalized viscosity and thermal diffusivity, PHYSICAL REVIEW E, Vol.98, 2018. 
  144. Gupta, Akash; Nadkarni-Ghosh, Sharvari; Sharma, Ishan, Rings of non-spherical, axisymmetric bodies, ICARUS, Vol. 299, 2018. 
  145. Singh, M. K.; Venkatesh, K. S.; Dutta, A., View planning method for complete 3D digitisation of the scene, ELECTRONICS LETTERS, Vol. 54, 2018. 
  146. Sengupta, Aditi; Suman, V. K.; Sengupta, Tapan K.; Bhaumik, Swagata, An enstrophy-based linear and nonlinear receptivity theory, PHYSICS OF FLUIDS, Vol. 30, 2018. 
  147. Singh, Sandeep Kumar; Azad, Prakrati; Akhtar, M. J.; Kar, Kamal K., Improved Methanol Detection Using Carbon Nanotube-Coated Carbon Fibers Integrated with a Split-Ring Resonator-Based Microwave Sensor, ACS APPLIED NANO MATERIALS, Vol. 1, 2018. 
  148. Gupta, Ankur; Bhattacharya, Shantanu, On the growth mechanism of ZnO nano structure via aqueous chemical synthesis, APPLIED NANOSCIENCE, Vol. 8, 2018. 
  149. Heifetz, Eyal; Guha, Anirban, A generalized action-angle representation of wave interaction in stratified shear flows, JOURNAL OF FLUID MECHANICS, Vol. 834, 2018. 
  150. Ramasamy, Navin Subbaiah; Kumar, Prem; Wangaskar, Bhimashankar; Khandekar, Sameer; Maydanik, Yuri F., Miniature ammonia loop heat pipe for terrestrial applications: Experiments and modeling, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol. 124, 2018. 
  151. Shirsath, Ganesh Bapu; Pala, Raj Ganesh S.; Muralidhar, K.; Khandekar, Sameer, Effect of salinity and water depth on the performance of doubly inclined solar still, DESALINATION AND WATER TREATMENT, Vol. 124, 2018. 
  152. Mittal, Sanjay; Tezduyar, Tayfun E., Comment on Experimental investigation of Taylor vortex photocatalytic reactor for water purification, CHEMICAL ENGINEERING SCIENCE, Vol. 192, 2018. 
  153. Ranjan, Prabhat; Balasubramaniam, R.; Jain, V. K., Investigations into the mechanism of material removal and surface modification at atomic scale on stainless steel using molecular dynamics simulation, PHILOSOPHICAL MAGAZINE, Vol. 98, 2018. 
  154. Venkatesan, Sudarkodi; Vivek-Ananth, R. P.; Sreejith, R. P.; Mangalapandi, Pattulingam; Hassanali, Ali A.; Samal, Areejit, Network approach towards understanding the crazing in glassy amorphous polymers, JOURNAL OF STATISTICAL MECHANICS-THEORY AND EXPERIMENT, Vol., 2018. 
  155. Ashari, S. Esna; Das, A.; Buscarnera, G., Model-Based Assessment of the Effect of Surface Area Growth on the Permeability of Granular Rocks, JOURNAL OF ENGINEERING MECHANICS, Vol.144, 2018. 
  156. Murkute, Pratik; Kumar, Ravi; Choudhary, S.; Maharana, H. S.; Ramkumar, J.; Mondal, K., Comparative Atmospheric Corrosion Behavior of a Mild Steel and an Interstitial Free Steel, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 27, 2018. 
  157. Benjwal, Poonam; De, Bibekananda; Kar, Kamal K., 1-D and 2-D morphology of metal cation co-doped (Zn, Mn) TiO2 and investigation of their photocatalytic activity, APPLIED SURFACE SCIENCE, Vol. 427, 2018. 
  158. Maiti, Soumyabrata; Bandyopadhyay, Ritwik; Chatterjee, Anindya, Vibrations of an Euler-Bernoulli beam with hysteretic damping arising from dispersed frictional microcracks, JOURNAL OF SOUND AND VIBRATION, Vol. 412, 2018. 
  159. Banerjee, Soma; Benjwal, Poonam; Singh, Milan; Kar, Kamal K., Graphene oxide (rGO)-metal oxide (TiO2/Fe3O4) based nanocomposites for the removal of methylene blue, APPLIED SURFACE SCIENCE, Vol. 439, 2018. 
  160. Chatterjee, Anando G.; Verma, Mahendra K.; Kumar, Abhishek; Samtaney, Ravi; Hadri, Bilel; Khurram, Rooh, Scaling of a Fast Fourier Transform and a pseudo-spectral fluid solver up to 196608 cores, JOURNAL OF PARALLEL AND DISTRIBUTED COMPUTING, Vol. 113, 2018. 
  161. Maharana, H. S.; Bishoyi, B.; Panda, S.; Basu, A., Electron Backscattered Diffraction Study of Pulse Electrodeposited Cu-Y2O3 Composite Coating, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 27, 2018. 
  162. Yadav, Surekha; Sarkar, S.; Aggarwal, Akash; Kumar, Arvind; Biswas, Krishanu, Wear and mechanical properties of novel (CuCrFeTiZn)(100-x)Pb-x high entropy alloy composite via mechanical alloying and spark plasma sintering, WEAR, Vol. 410, 2018. 
  163. Chamoli, Pankaj; Das, Malay K.; Kar, Kamal K., Urea-assisted low temperature green synthesis of graphene nanosheets for transparent conducting film, JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, Vol. 113, 2018. 
  164. Pal, Ranu; Akhtar, M. J.; Kar, Kamal K., Study on dielectric properties of synthesized exfoliated graphite reinforced epoxy composites for microwave processing, POLYMER TESTING, Vol. 70, 2018. 
  165. Nellippallil, Anand Balu; Rangaraj, Vignesh; Gautham, B. P.; Singh, Amarendra Kumar; Allen, Janet K.; Mistree, Farrokh, An Inverse, Decision-Based Design Method for Integrated Design Exploration of Materials, Products, and Manufacturing Processes, JOURNAL OF MECHANICAL DESIGN, Vol. 140, 2018. 
  166. Kumar, Ravindra; Kar, Kamal K.; Kumar, Vijai, Studies on the effect of compatibilizers on mechanical, thermal and flow properties of polycarbonate/poly (butylene terephthalate) blends, MATERIALS RESEARCH EXPRESS, Vol. 5, 2018. 
  167. Pal, Ranu; Akhtar, M. J.; Kar, Kamal K., Microwave-Assisted Curing of Silicon Carbide-Reinforced Epoxy Composites: Role of Dielectric Properties, JOM, Vol. 70, 2018. 
  168. Mishra, Raghvendra Kumar; Ha, Sung Kyu; Verma, Kartikey; Tiwari, Santosh K., Recent progress in selected bio-nanomaterials and their engineering applications: An overview, JOURNAL OF SCIENCE-ADVANCED MATERIALS AND DEVICES, Vol. 3, 2018. 
  169. Sharma, Pushpender; Sengupta, Tapan K.; Bhaumik, Swagata, Three-dimensional transition of zero-pressure-gradient boundary layer by impulsively and nonimpulsively started harmonic wall excitation, PHYSICAL REVIEW E, Vol. 98, 2018. 
  170. Jha, Kanishka; Kumar, Ravinder; Verma, Kartikey; Chaudhary, Babulal; Tyagi, Y. K.; Singh, Subhash, Application of modified TOPSIS technique in deciding optimal combination for bio-degradable composite, VACUUM, Vol. 157, 2018. 
  171. Yadav, Amit K.; Banerjee, Soma; Kumar, Ravindra; Kar, Kamal K.; Ramkumar, J.; Dasgupta, Kinshuk, Mechanical Analysis of Nickel Particle-Coated Carbon Fiber-Reinforced Epoxy Composites for Advanced Structural Applications, ACS APPLIED NANO MATERIALS, Vol. 1, 2018. 
  172. Kumar, Ravindra; Kar, Kamal K.; Dasgupta, Kinshuk, Static and dynamic mechanical analysis of graphite flake filled phenolic-carbon fabric composites and their correlation with interfacial interaction parameters, POLYMER ENGINEERING AND SCIENCE, Vol. 58, 2018. 
  173. Karthik, P. B.; Sardhara, Jayesh; Tiwari, Nachiketa; Behari, Sanjay, A device for three-dimensional quantitative assessment and alignment of C1-2 vertebrae during posterior distraction and fusion technique for atlantoaxial dislocation and/or basilar invagination, NEUROLOGY INDIA, Vol. 66, 2018. 
  174. Ansari, Mohammed Istafaul Haque; Qurashi, Ahsanulhaq; Nazeeruddin, Mohammad Khaja, Frontiers, opportunities, and challenges in perovskite solar cells: A critical review, JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY C-PHOTOCHEMISTRY REVIEWS, Vol. 35, 2018. 
  175. Sundaram, Prasannabalaji; Sengupta, Tapan K.; Bhaumik, Swagata, The three-dimensional impulse response of a boundary layer to different types of wall excitation, PHYSICS OF FLUIDS, Vol. 30, 2018. 
  176. Prasad, Jitendra; Goswami, Avijit; Kumbhani, Brijesh; Mishra, Chittaranjan; Tyagi, Himanshu; Jun, Jung Hyun; Choudhary, Kamal Kumar; Kumar, Mukesh; James, Naveen; Reddy, V. Ravi Shankar; Singh, Satwinder Jit; Kashyap, Deepak; Sohoni, Milind; DasGupta, Nandita; Raina, Prabhu Krishna; Saha, Samir Kumar; Mittal, Sanjay; Chakraborty, Suman; Das, Sarit Kumar, Engineering curriculum development based on education theories, CURRENT SCIENCE, Vol. 114, 2018. 
  177. Wu, Jian; Zhang, Chuanbing; Su, Benlong; Dong, Jiyi; Wang, Youshan; Gond, Bipin Kumar, New method for studying the macro-micro contact properties between smooth metal and silicone rubber, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 96, 2018. 
  178. Chamoli, Pankaj; Singh, Sandeep Kumar; Akhtar, M. J.; Das, Malay K.; Kar, Kamal K., Nitrogen doped graphene nanosheet-epoxy nanocomposite for excellent microwave absorption, PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES, Vol. 103, 2018. 
  179. Shukla, Pravesh Chandra; Gupta, Tarun; Agarwal, Avinash Kumar, Performance evaluation of a biodiesel fuelled transportation engine retrofitted with a non-noble metal catalysed diesel oxidation catalyst for controlling unregulated emissions, JOURNAL OF HAZARDOUS MATERIALS, Vol. 344, 2018. 
  180. Surthi, Kiran Kumar; De, Bibekananda; Ramkumar, J.; Kar, Kamal K., Enhancement of the surface reactivity of zigzag boron nitride nanoribbons by chlorine gas decoration: A computational study, JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, Vol. 120, 2018. 
  181. Kumar, Ravindra; Varshney, Suyash; Kar, Kamal K.; Dasgupta, Kinshuk, Enhanced thermo-mechanical and electrical properties of carbon-carbon composites using human hair derived carbon powder as reinforcing filler, ADVANCED POWDER TECHNOLOGY, Vol. 29, 2018. 
  182. Prakash, Chander; Singh, Sunpreet; Singh, Manjeet; Verma, Kartikey; Chaudhary, Babulal; Singh, Subhash, Multi-objective particle swarm optimization of EDM parameters to deposit HA-coating on biodegradable Mg-alloy, VACUUM, Vol. 158, 2018. 
  183. Bandyopadhyay, Ritwik; Maiti, Soumyabrata; Ghosh, Aparna (Dey); Chatterjee, Anindya, Overhead water tank shapes with depth-independent sloshing frequencies for use as TLDs in buildings, STRUCTURAL CONTROL & HEALTH MONITORING, Vol. 25, 2018. 
  184. Singh, Amandeep; Philip, Deepu; Ramkumar, J.; Das, Mainak, A simulation based approach to realize green factory from unit green manufacturing processes, JOURNAL OF CLEANER PRODUCTION, Vol. 182, 2018. 
  185. Sapkale, Swapnil L.; Sucheendran, Mahesh M.; Gupta, Shakti S.; Kanade, Shantanu V., Vibroacoustic study of a point-constrained plate mounted in a duct, JOURNAL OF SOUND AND VIBRATION, Vol. 420, 2018. 
  186. Singh, Anamika; Asikainen, Sanja; Teotia, Arun K.; Shiekh, Parvaiz A.; Huotilainen, Eero; Qayoom, Irfan; Partanen, Jouni; Seppala, Jukka; Kumar, Ashok, Biomimetic Photocurable Three-Dimensional Printed Nerve Guidance Channels with Aligned Cryomatrix Lumen for Peripheral Nerve Regeneration, ACS APPLIED MATERIALS & INTERFACES, Vol. 10, 2018. 
  187. Kumar, Rajesh; da Silva, Everson T. S. G.; Singh, Rajesh K.; Savu, Raluca; Alaferdov, Andrei V.; Fonseca, Leandro C.; Carossi, Lory C.; Singh, Arvind; Khandka, Sarita; Kar, Kamal K.; Alves, Oswaldo L.; Kubota, Lauro T.; Moshkalev, Stanislav A., Microwave-assisted synthesis of palladium nanoparticles intercalated nitrogen doped reduced graphene oxide and their electrocatalytic activity for direct-ethanol fuel cells, JOURNAL OF COLLOID AND INTERFACE SCIENCE, Vol. 515, 2018. 
  188. Bessonov, Nikolai; Reinberg, Natalia; Banerjee, Malay; Volpert, Vitaly, The Origin of Species by Means of Mathematical Modelling, ACTA BIOTHEORETICA, Vol. 66, 2018. 
  189. Nowakowski, Tomasz J.; Rani, Neha; Golkaram, Mahdi; Zhou, Hongjun R.; Alvarado, Beatriz; Huch, Kylie; West, Jay A.; Leyrat, Anne; Pollen, Alex A.; Kriegstein, Arnold R.; Petzold, Linda R.; Kosik, Kenneth S., Regulation of cell-type-specific transcriptomes by microRNA networks during human brain development, NATURE NEUROSCIENCE, Vol. 21, 2018. 
2017
  1. Carpenter, J. R., Guha, A. and Heifetz, E., A physical interpretation of the wind-wave instability as interacting waves. Journal of Physical Oceanography , 47, pp. 1441–1455, (2017).
  2. Guha, A.  and Udwadia, F. E., Non-linear dynamics induced by linear wave interactions in multi-layered flows. Journal of Fluid Mechanics, 816, pp. 412-427, (2017).
  3. Mandal, A. K.,  and  Wahi, P., Mode-locking and improved harmonicity for real strings vibrating in the presence of a curved obstacle. Nonlinear Dynamics, pp. 2203-2224, (2017).
  4. Das, S., and Wahi, P., Approximations for period-1 rotation of vertically and horizontally excited parametric pendulum. Nonlinear Dynamics, 88(3), pp. 2171-2201, (2017).
  5. Kumar, A., Das, S. L., and Wahi, P., Effect of radial loads on the natural frequencies of thin-walled circular cylindrical shells. International Journal of Mechanical Sciences, 122, pp. 37-52, (2017).
  6. Silveira, M., Wahi, P., and Fernandes, J. C. M., Effects of asymmetrical damping on a 2 DOF quarter-car model under harmonic excitation. Communications in Nonlinear Science and Numerical Simulation, 43, pp. 14-24, (2017).
  7. Singh, H., and Wahi, P., Non-planar vibrations of a string in the presence of a boundary obstacle. Journal of Sound and Vibration, 389, pp. 326-349, (2017).
  8. Verma, D., Kalra, M. S., and Wahi, P., Effect of nonlinear void reactivity on bifurcation characteristics of a lumped-parameter model of a BWR: A study relevant to RBMK. Nuclear Engineering and Design, 315, pp. 179-193, (2017).
  9. Singh, H., and Wahi, P., Role of curvatures in determining the characteristics of a string vibrating against a doubly curved obstacle. Journal of Sound and Vibration, 402, pp. 1-13, (2017).
  10. Kumar, R., and Wahi, P., Dynamo transition in a five-mode helical model. Physics of Plasma, 24, 092305, (2017).
  11. Verma, D., Kalra, M. S., and Wahi, P., A comparative study of bifurcation characteristics in single and two-zone fuel models of a BWR: A case study of the advanced heavy water reactor (AHWR). Nuclear Engineering and Design, 324(1), pp. 158-170, (2017).
  12. Sarkar, S., Wahi, P., and Munshi, P., Dual scan CT image recovery from truncated projections. Review of Scientific Instruments, 88(12), 123704, (2017).
  13. Nagdeve, L., Jain, V. K. and Ramkumar, J., Preliminary investigations into nano-finishing of freeform surface (femoral) using inverse replica fixture. The International Journal of Advanced Manufacturing Technology, pp. 1-12, (2017).
  14. Kajal, S., Jain, V. K. and Ramkumar, J. and Nagdeve, L., Experimental and theoretical investigations into internal magnetic abrasive finishing of a revolver barrel. The International Journal of Advanced Manufacturing Technology, pp. 1-18, (2017).
  15. Nagdeve, L., Sidpara, A., Jain, V. K. and Ramkumar, J., On the effect of relative size of magnetic particles and abrasive particles in MR fluid-based finishing process. Machining Science and Technology, pp. 1-14, (2017).
  16. Patel, D. S., Singh, A., Jain, V. K., Ramkumar, J. and Shrivastava, A., Investigations into insertion force of electrochemically micro-textured hypodermic needles. The International Journal of Advanced Manufacturing Technology, pp. 1-16, (2017).
  17. Murkute, P., Choudhary, S., Ramkumar, J. and Mondal, K., Effect of Exposure Face Orientation and Tilt Angle on Immersion Corrosion Behavior of Dual-Phase and Mild Steels. Journal of Materials Engineering and Performance, 26, pp. 151- 160, (2017).
  18. Parameswari, G., Jain, V. K., Ramkumar, J. and Nagdeve, L., Experimental investigations into nanofinishing of Ti6Al4V flat disc using magnetorheological finishing process. The International Journal of Advanced Manufacturing Technology, pp. 1-11, (2017).
  19. Tyagi, A., Sharma, V., Jain, V. K. and Ramkumar, J., Investigations into side gap in wire electrochemical micromachining (wire-ECMM). The International Journal of Advanced Manufacturing Technology, pp. 1-10, (2017).
  20. Sheokand, H.,  Ghosh, S., Singh, G., Saikia, M., Srivastava, K. V.,  Ramkumar, J., and Ramakrishna, A. S., Transparent broadband metamaterial absorber based on resistive films. Journal of Applied Physics, 122, pp. 1-8, (2017).
  21. Penke, Y. K., Anantharaman, G.,  Ramkumar, J. and Kar, K. K., Aluminum Substituted Cobalt Ferrite (Co−Al−Fe) Nano Adsorbent for Arsenic Adsorption in Aqueous Systems and Detailed Redox Behavior Study with XPS. ACS Applied Materials & Interfaces, 9 (13), pp 11587–11598, (2017).
  22. Ankit Kumar Gautam, Sunil Niranjan and Pradipta Kumar Panigrahi, Hydrodynamics Around a Shroud Tube Assembly of a Fast Breeder Reactor, Nuclear Engineering and Design, Vol. 324, pp. 297-314, (2017).
  23. Tapan Kumar Pradhan and Pradipta Kumar Panigrahi, Evaporation induced natural convection inside a droplet of aqueous solution placed on a superhydrophobic surface, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 530, pp. 1-12, (2017).
  24. Mohammed Asfer, S. K. Saroj and Pradipta Kumar Panigrahi, Retention of ferrofluid aggregate at the target site during Magnetic Drug Targeting, Journal of Magnetism and Magnetic Materials, Vol. 436, pp. 47-56, (2017).
  25. Bal Krishna Mishra, Pradipta Kumar Panigrahi, Formation and characterization of the vortices generated by a DBD plasma actuator in burst mode, Physics of Fluids, Vol. 29, pp. 24104(1-17), (2017).
  26. Sharma B. L., On scattering of waves on square lattice half-plane with mixed boundary condition, Zeitschrift für angewandte Mathematik und Physik, Volume 68(5):120, Pages 1-24, (2017).
  27. Sharma B. L., On linear waveguides of square and triangular lattice strips: an application of Chebyshev polynomials”, Sadhana, Volume 42(6), Pages 901-927, (2017).
  28. Sharma B. L., Continuum limit of the discrete Sommerfeld problems on square lattice”, Sadhana, Volume 42(5), Pages 713-728, (2017).
  29. Sharma B. L., On linear waveguides of zigzag honeycomb lattice strips”, Waves in Random and Complex Media, Volume 28(1), Pages 1-43, (2017).
  30. Mahapatra, A. and Ghoshdastidar, P. S., “A Computational Study of Mixed Convection Heat Transfer from a Continuously Moving Isothermal Vertical Plate to Alumina-Water Nanofluid as in Hot Extrusion”, ASME Journal of Manufacturing Science and Engineering, Vol. 139, p.114501, (2017).
  31. Agrawal, A. and Ghoshdastidar, P. S., “Numerical Simulation of Heat Transfer during Production of Rutile Titanium Dioxide in a Rotary Kiln”, International Journal of Heat and Mass Transfer, Vol. 106, pp. 263-279, (2017).
  32. K. Rathore, S. Bhattacharjee, P. Munshi, Characterization of microwave plasma in a multicusp using 2D emission based tomography: Bessel modes and wave absorption, Physics of Plasmas, 24, Article 063503, (2017).
  33. S. P. Saraswat, P. Munshi, A. Khanna, C. Allison, Ex-Vessel Loss of Coolant Accident Analysis of ITER Divertor Cooling System Using Modified RELAP/ SCADAPSIM / Mod4.0, ASME Journal of Nuclear Engineering and Radiation Science, 3, pp. 041009/1-041009/13, (2017).
  34. Sarkar, S. and Ranakoti, G., Effect of vortex generators on film cooling effectiveness, Journal of Turbomachinery, Transactions of ASME, 139 (6), 061009, (2017).
  35. Anand, K. and Sarkar, S., Features of a Laminar Separated Boundary Layer near the Leading-edge of a model aerofoil for different Angles of Attack: An Experimental Study, Journal of Fluids Engineering, Transactions of ASME, 139 (2), 021201, (2017).
  36. Nair, K. M. and Sarkar, S., LES of Self-Sustained Cavity Oscillation for Subsonic and Supersonic Flows, Journal of Fluids Engineering, Transactions of ASME, 139 (1), 011102, (2017).
  37. Saha, P., Biswas, G., Mandal, A.C. and Sarkar, S., Investigation of coherent structures in a turbulent channel with built-in longitudinal vortex generators, International Journal of Heat and Mass Transfer, 104, pp. 178-198, (2017).
  38. Nair, K. M., Sarkar, S. and Labana, Z., Self-sustained oscillation for a three dimensional transonic cavity using LES, Lecture Notes in Mechanical Engineering, Part F8, pp. 659-668, (2017).
  39. Roychowdhury, A. and Gupta, A., Material homogeneity and strain compatibility in thin elastic shells. Mathematics and Mechanics of Solids, 22, pp. 1619-1635, (2017).
  40. Roychowdhury, A. and Gupta, A., Non-metric connection and metric anomalies in materially uniform elastic solids. Journal of Elasticity, 126, pp. 1-26, (2017).
  41. Tiwari, S. and Gupta, A., Effects of Air Loading on the Acoustics of an Indian Musical Drum. Journal of the Acoustical Society of America, 141, pp. 2611-2621, (2017).
  42. Basak, A. and Gupta, A., Influence of a mobile incoherent interface on the strain-gradient plasticity of a thin slab. International Journal of Solids and Structures, 108, pp. 126-138, (2017).
  43. Mukherjee, M., Gupta, A. and Prashant, A., Instability analysis of sand under undrained biaxial loading with rigid and flexible boundary. ASCE Journal of Geomechanics, 17, 04016042, (2017).
  44. Kalra, S., Bhattacharya, B., and Munjal, B. S., Design of shape memory alloy actuated intelligent parabolic antenna for space applications, Smart Materials and Structures, 26(9), pp. 095015(1-14), (2017).
  45. Jaipurkara, T., Kanta, P., Khandekar, S., Bhattacharya, B. and Paralikarb S., Thermo-mechanical design and characterization of flexible heat pipes, Applied Thermal Engineering, 126, pp.1199-1208, (2017).
  46. Kuponu, O.S., Kadirkamanathan, V., Bhattacharya, B., and Pope, S.A., Integrated sensing, monitoring and healing of composite systems, Advances in Science and Technology, 101, pp. 62-68, (2017).
  47. Pandey, A., Datta, R., Bhattacharya, B., Topology optimization of compliant structures and mechanisms using constructive solid geometry for 2-d and 3-d applications, Soft Computing, 21(5), pp. 1157–1179, (2017).
  48. Hwang, J., Bae, C., Patel, C., Agarwal, R.A., Gupta, T. and Agarwal, A.K., Investigations on Air-Fuel Mixing and Flame Characteristics of Biodiesel Fuels for Diesel Engine Application. Applied Energy, 206, pp. 1203-1213, (2017).
  49. Agarwal, A.K., Gadekar, S., Singh, A.P., In-Cylinder Air Flow Characteristics of different Intake Port Geometries using Tomographic PIV. Physics of Fluids, 29(9), pp. 095104(1-16), (2017).
  50. Agarwal, A.K., Gadekar, S., Singh, A.P., In-Cylinder Flow Evolution Using Tomographic Particle Imaging Velocimetry in an Internal Combustion Engine. ASME Journal of Energy Resources Technology, 140(1), pp. 012207-012207-10, (2017).
  51. Singh, A.P., Jain, A., Agarwal, A.K., Fuel-Injection Strategy for PCCI Engine Fueled by Mineral Diesel and Biodiesel Blends. Energy and Fuels, 31 (8), pp. 8594–8607, (2017).
  52. Shukla, P.C., Gupta, T., Gupta, N., Agarwal, A.K., A Qualitative Correlation between Engine Exhaust Particulate Number and Mass Emissions. FUEL, 202, pp. 241-245, (2017).
  53. Singh, A.P., Pal, A., Gupta, N.K., Agarwal, A.K., Particulate Emissions from Laser Ignited and Spark Ignited Hydrogen Fueled Engines. International Journal of Hydrogen Energy, 42(24), pp. 15956-15965, (2017).
  54. Agarwal, A.K., Singh, A.P., Pal, A., Effect of Laser Parameters and Compression Ratio on Particulate Emissions from a Laser Ignited Hydrogen Engine. International Journal of Hydrogen Energy, 42(15), pp. 10622-10635, (2017).
  55. Sagar, SMV., Agarwal, A.K., Experimental Investigation of Varying Composition of HCNG on Performance and Combustion Characteristics of a SI Engine. International Journal of Hydrogen Energy, 42(18), pp. 13234-13244, (2017).
  56. Sharma, N., Agarwal, A.K., Effect of Fuel Injection Pressure on Particulate Emissions from a Gasohol (E15 & M15) Fuelled Gasoline Direct Injection Engine. Energy and Fuels, 31 (4), pp. 4155–4164, (2017).
  57. Singh, A.P., Agarwal, A.K., Partially Homogeneous Charge Compression Ignition (PHCCI) Engine Development for Low Volatility Fuels. Energy and Fuels, 31 (3), pp. 3164–3181, (2017).
  58. Agarwal, A.K., Maurya, R.K., Singh, A.P., Evolution, Challenges and Path Forward for Low Temperature Combustion Engines. Progress in Energy and Combustion Science, 61, pp. 1-56(2017).
  59. Agarwal, A.K., Gupta, J., Dhar, A., Potential and Challenges for Large Scale Application of Biodiesel in Automotive Sector. Progress in Energy and Combustion Science, 61, pp. 113-149(2017).
  60. Jain, A., Singh, A.P., Agarwal, A.K., Effect of Split Fuel Injection and EGR on NOx and PM Emission Reduction in a Low Temperature Combustion (LTC) Mode Diesel Engine. Energy, 122, pp. 249-264, (2017).
  61. Jain, A., Singh, A.P., Agarwal, A.K., Effect of Fuel Injection Parameters on Combustion Stability and Emissions of a Mineral Diesel Fueled Partially Premixed Charge Compression Ignition (PCCI) Engine. Applied Energy, 190, pp. 658-669, (2017).
  62. Prasad, R.K., Jain, S., Verma, G., Agarwal*, A.K., Laser Ignition and Flame kernel Characterization of HCNG in a constant volume combustion chamber. Fuel, 190, pp. 318-327, (2017).
  63. Lee, S., Lee, C.S., Park, S., Gupta, J.G., Maurya, R.K., Agarwal, A.K., Spray Characteristics, Engine Performance and Emission Analysis of Karanja Biodiesel and Its Diesel Fuel Blends. Energy, 119, pp. 138-151, (2017).
  64. Jiotode, Y., Agarwal, A.K., Endoscopic Combustion Characterization of Jatropha Biodiesel in a Compression Ignition Engine. Energy, 119, pp. 845-851, (2017).
  65. Shukla, P.C., Gupta, T., Khobragade, R., Labhsetwar, N.K., Gupta, N., and Agarwal, A.K., Effectiveness of non-noble metal based diesel oxidation catalysts on particle number emissions for diesel and biodiesel (B20) exhaust. Science of Total Environment, 574, pp. 1512-1520, (2017).
  66. Shukla, P.C., Gupta, T., Labhsetwar, N.K., and Agarwal, A.K., Trace Metals and Ions in Particulates Emitted by Biodiesel Fuelled Engine. Fuel, 188, pp. 603-609, (2017).
  67. Kumar, V., Sinha, S.K., Agarwal, A.K., Tribological Studies of Epoxy Composites with Solid and Liquid Fillers. Tribology International, 105, pp. 27-36, (2017).
  68. Gautam, S.S. and Dixit, P.M., Simulation of Large Deformation Elasto-plastic Impact Problems using Two Different Objective Stress Measures. Procedia Engineering, 173, pp. 432-439, (2017).
  69. Bhandari A. and Bhattacharya J., Manganese Dissolution from Spinel Cathode: Few Unanswered Questions. Journal of The Electrochemical Society , 164(2), pp. A106-A127, (2017).
  70. Bhattacharjee A and Chatterjee A., Interplay between dissipation and modal truncation in ball-beam impact, ASME Journal of Computational and Nonlinear Dynamics 12 (6), 061018, (2017).
  71. Kanchwala H and Chatterjee A., A generalized quarter car modelling approach with frame flexibility and other nonlocal effects. Sādhanā 42 (7), 1175-1192, (2017).
  72. Sundriyal P. and Bhattacharya S., Inkjet printed graphene/ MnO2 super-capacitors on flexible substrates, ACS applied materials and interfaces, 9 (44), 38507–38521, (2017).
  73. Patel V.K. and Bhattacharya S., Solid state green synthesis and catalytic activity of CuO nanorods in thermal decomposition of potassium periodate, Material Research Express, 4(9), (2017).
  74. Kumar S., Bhushan P., Bhattacharya S., Facile Synthesis of Au@Ag-Hemin Decorated Reduced Graphene Oxide Sheets: A Novel Peroxidase Mimetic for Ultrasensitive Colorimetric Detection of Hydrogen Peroxide and Glucose, RSC Advances, 7, 37568, (2017).
  75. Bhatt G., Kant R., Yadav K., Mishra K., Singh D., Gurunath R., Bhattacharya S., Impact of surface roughness on Dielectrophoretically assisted concentration of microorganisms over PCB based platforms, Biomedical Microdevices, 28, doi: 10.1007/s10544-017-0172-5, (2017).
  76. Singh P., Rai A., Gupta A., Bhattacharya S. , Enhanced Photocatalytic performance of vertically grown ZnO nanorods with doping of noble metal (Al, Ag, Au, and Au-Pd) nanoparticles for degradation of industrial dye, Material Research Express, 4(5), 055004, (2017).
  77. Singh P. and Bhattacharya S., Vanadium Pentoxide Nanostructures for Sensitive Detection of Hydrogen Gas at Room Temperature, Journal of Energy, Environment and Sustainability, 2, 69-74, (2017).
  78. Singh P. and Bhattacharya S., Highly sensitive V2O5.1.6H2O nanostructures for sensing of Helium gas at room temperature, Material Letters, (2017).
  79. Sundriyal P. and Bhattacharya S., Polyaniline- Silver nanoparticle- coffee waste extracted porous graphene nanocomposite structures as novel supercapacitor materials, Material Research Express, 43(03), 035501, (2017).
  80. Singh S.K., Yadav M.K., Khandekar S., Measurement issues associated with surface mounting of thermopile heat flux sensors,   Applied Thermal Engineering, Vol. 114, 1105-1113, (2017).
  81. Saraswat A., Bhattacharjee R., Verma A., Das M.K., Khandekar S., Investigation of diffusional transport of heat and its enhancement in phase-change thermal energy storage systems,   Applied Thermal Engineering, Vol. 111, 1611-1621, (2017).
  82. Y. Nimdeo, Y.M. Joshi, and K. Muralidhar, Diffusion of charged nano-disks in aqueous media: Influence of competing inter-particle interactions and thermal effects, Chemical Engineering Science, Volume 164, pp. 71-80 (2017).
  83. Mohanty D.P., Rao V L., Das S.L., Ghatak A., Polygonal deformation of a metallic foil subjected to impact by an axisymmetric indenter,   Journal of Adhesion Science and Technology, Vol. 31, 1647-1657, (2017).
  84. Rao V.L., Roy S., Das S.L., Diffusion mediated coagulation and fragmentation based study of domain formation in lipid bilayer membrane,   Physica B: Condensed Matter, Vol. 505, 74-83, (2017).
  85. Bhateja, A., I. Sharma and J.K. Singh., Segregation physics of a macroscale granular ratchet, Phys. Rev. Fluid Rapid Communication 2, 052301:1-9, (2017)
  86. Choudhary V.P., Singh V.K., Dutta A., Design of an Optimal 4-bar Mechanism Based Gravity Balanced Leg Orthosis,   Journal of Intelligent and Robotic Systems: Theory and Applications, Vol. 86, 485-494, (2017).
  87. Singh M.K., Dutta A., Subramanian V.K., Accurate three-dimensional documentation of distinct sites, Journal of Electronic Imaging, Vol. 26, (2017).
  88. Purty R., Akanchha, Prasad S., “Isotopic characterization and thermal neutron flux determination of a PuBe neutron source,” Applied Radiation and Isotopes, 125, pp 144, (2017).
2016
  1. Santanu De, Ashoke De, Abhishek Jaiswal, Arpita Dash, Stabilization of lifted hydrogen jet diffusion flame in a vitiated co-flow: effects of jet and coflow velocities, coflow temperature and mixing, Int. J. Hydrogen Energy, 2016.
  2. Balaji Suresh, De Ashoke, De Santanu. Numerical Investigation of Swirling Hydrogen Flames: Effect of Swirl and Fuel Jet in Coherent Structures, J. Energy Environmental Sustainability, 2016, 1, 19-33. .
  3. C. Straub, Santanu De, K. Vogiatzaki, A. Kronenburg, The effect of time scale variation in multiple mapping conditioning mixing of PDF calculations for Sandia Flame series (D-F), Combustion Theory and Modelling, 2016, DOI: 10.1080/13647830.2016.1191677. .
  4. Arya M., Khandekar S., Pratap D., Ramakrishna S. A., Pool Boiling of Water on Nano-structured Micro-wires at Sub-atmospheric Conditions, Heat and Mass Transfer, Vol. 52(9), pp. 1725-1737, (2016).
  5. Sharma Nikhil, Agarwal Kumar Avinash, “Microscopic and Macroscopic Spray Characteristics of GDI Injector Using Gasohol Fuels at Various Injection Pressures”, SAE 2016-01-0868, SAE Special Publication-2016
  6. Gupta Gopal Jai, Agarwal Kumar Avinash, “Macroscopic and Microscopic Spray Characteristics of Diesel and Karanja Biodiesel Blends”, SAE 2016-01-0869, SAE Special Publication-2016.
  7. Patel Chetankumar, Sharma Nikhil, Tiwari Nachiketa, Agarwal Kumar Avinash, “Effects of Spray Droplet Size and Velocity Distributions on Gaseous Emissions from a Single Cylinder Biofuel Engine”, SAE 2016-01-0994, SAE Special Publication-2016. .
  8. Agnihotri S.K., Parameswaran V., Mixed-mode fracture of layered plates subjected to in-plane bending, International Journal of Fracture, Vol. 197, 63-79, (2016). .
  9. Ahmed F., Deb K., Bhattacharya B., Structural topology optimization using multi-objective genetic algorithm with constructive solid geometry representation, Applied Soft Computing Journal, Vol. 39, 240-250, (2016). .
  10. Asfer M., Mehta B., Kumar A., Khandekar S., Panigrahi P.K., Effect of magnetic field on laminar convective heat transfer characteristics of ferrofluid flowing through a circular stainless steel tube, International Journal of Heat and Fluid Flow, Vol. 59, 74-86, (2016). .
  11. Banerjee S., Kar K.K., Synergistic effect of aluminium phosphate and tungstophosphoric acid on the physicochemical properties of sulfonated poly ether ether ketone nanocomposite membrane, Journal of Applied Polymer Science, Vol. 133, (2016). .
  12. Banerjee S., Kar K.K., Superior water retention, ionic conductivity and thermal stability of sulfonated poly ether ether ketone/polypyrrole/aluminum phosphate nanocomposite based polymer electrolyte membrane, Journal of Environmental Chemical Engineering, Vol. 4, 299-310, (2016). .
  13. Basak A., Gupta A., Plasticity in multi-phase solids with incoherent interfaces and junctions, Continuum Mechanics and Thermodynamics, Vol. 28, 423-442, (2016). .
  14. Bhateja A., Sharma I., Singh J.K., Scaling of granular temperature in vibro-fluidized grains, Physics of Fluids, Vol. 28, -, (2016). .
  15. Biswal S.K., Mohapatra P.K., Muralidhar K., Transitional Flow In A Right-Angled Compound Open Canal Junction, Irrigation and Drainage, Vol. 65, 73-84, (2016). .
  16. Biswas S., Jana P. and Chatterjee A. Hysteretic damping in an elastic body with frictional microcracks. International Journal of Mechanical Sciences, vol. 108-109, 2016, 61-71. [DOI:10.1016/j.ijmecsci.2016.01.029] .
  17. Orra Kashfullv, Choudhury K. Sounak, “Development of Flank Wear model of cutting tool by using Adaptive Feedback Linear Control System on machining AISI D2 steel and AISI 4340 steel” Mechanical Systems and Signal Processing, 2016, Vol. 81, pp. 475-492. .
  18. Datta R., Deb K., Uniform adaptive scaling of equality and inequality constraints within hybrid evolutionary-cum-classical optimization, Soft Computing, Vol. 20, 2367-2382, (2016). .
  19. Datta R., Pradhan S., Bhattacharya B., Analysis and Design Optimization of a Robotic Gripper Using Multiobjective Genetic Algorithm, IEEE Transactions on Systems, Man, and Cybernetics: Systems, Vol. 46, 16-26, (2016). .
  20. Datta R., Regis R.G., A surrogate-assisted evolution strategy for constrained multi-objective optimization, Expert Systems with Applications, Vol. 57, 270-284, (2016). .
  21. Datta R., Jain A., Bhattacharya B., A piezoelectric model based multi-objective optimization of robot gripper design, Structural and Multidisciplinary Optimization, Vol. 53, 453-470, (2016). .
  22. Visakh M.G., Saha A.K., Muralidhar K., Effect of spanwise shear on flow past a square cylinder at intermediate Reynolds numbers, Physics of Fluids, Vol. 28, -, (2016). .
  23. Faye A., Parameswaran V., Basu S., Dynamic fracture initiation toughness of PMMA: A critical evaluation, Mechanics of Materials, Vol. 94, 156-169, (2016). .
  24. Ghosh A., Guha S.K., Linear stability analysis of finite hydrodynamic journal bearing under turbulent lubrication with coupled-stress fluid, Industrial Lubrication and Tribology, Vol. 68, 386-391, (2016). .
  25. Ramgadia, A. G., Saha, A. K., "Three-dimensional Numerical Study of Turbulent Numerical Study of Fully Developed Unsteady Flow and Heat Transfer in Asymmetric Wavy Channels", Int J. Heat Mass Transfer, Vol. 102, pp. 98-112, 2016. .
  26. Guha A., Mechoso C.R., Konor C.S., Heikes R.P., Modeling rossby wave breaking in the southern spring stratosphere, Journal of the Atmospheric Sciences, Vol. 73, 393-406, (2016). .
  27. Gupta S.K., Wahi P., Global axial-torsional dynamics during rotary drilling, Journal of Sound and Vibration, Vol. 375, 332-352, (2016). .
  28. Hora T.S., Agarwal A.K., Effect of varying compression ratio on combustion, performance, and emissions of a hydrogen enriched compressed natural gas fuelled engine, Journal of Natural Gas Science and Engineering, Vol. 31, 819-828, (2016). .
  29. Hora T.S., Shukla P.C., Agarwal A.K., Particulate emissions from hydrogen enriched compressed natural gas engine, Fuel, Vol. 166, 574-580, (2016). .
  30. Khan M.P., Singh A.K., Singh A.K., Shrivastava P., Tiwari M.C., Nagar G.K., Bora H.K., Parameswaran V., Sanyal S., Bellare J.R., Chattopadhyay N., Odanacatib Restores Trabecular Bone of Skeletally Mature Female Rabbits with Osteopenia but Induces Brittleness of Cortical Bone: A Comparative Study of the Investigational Drug with PTH, Estrogen, and Alendronate, Journal of Bone and Mineral Research, Vol. 31, 615-629, (2016). .
  31. Kumar A., Logapperumal S., Sharma R., Das M.K., Kar K.K., Li-ion transport, structural and thermal studies on lithium triflate and barium titanate incorporated poly (vinylidene fluoride-co-hexafluoropropene) based polymer electrolyte, Solid State Ionics, Vol. 289, 150-158, (2016). .
  32. Kumar P., Sauer R.A., Saxena A., Synthesis of C0 Path-Generating Contact-Aided Compliant Mechanisms Using the Material Mask Overlay Method, Journal of Mechanical Design, Transactions of the ASME, Vol. 138, -, (2016). .
  33. Kuponu O.S., Kadirkamanathan V., Bhattacharya B., Pope S.A., Using feedback control to actively regulate the healing rate of a self-healing process subjected to low cycle dynamic stress, Smart Materials and Structures, Vol. 25, -, (2016). .
  34. Mistri G.K., Aggarwal S.K., Longman D., Agarwal A.K., Performance and Emission Investigations of Jatropha and Karanja Biodiesels in a Single-Cylinder Compression-Ignition Engine Using Endoscopic Imaging, Journal of Energy Resources Technology, Transactions of the ASME, Vol. 138, -, (2016). .
  35. Sharma V., Sinha N., Dutt S., Chawla M., Siril P.F., Tuning the surface enhanced Raman scattering and catalytic activities of gold nanorods by controlled coating of platinum, Journal of Colloid and Interface Science, Vol. 463, 180-187, (2016). .
  36. Sharma I., Stability of binaries. Part II: Rubble-pile binaries, Icarus, Vol. 277, 125-140, (2016). .
  37. Sharma BL, "On energy balance and the structure of radiated waves in kinetics of crystalline defects”, Journal of the Mechanics and Physics of Solids, May 2016 (accepted) .
  38. Sharma BL, "Wave propagation in bifurcated waveguides of square lattice strips”, SIAM Journal on Applied Mathematics, Apr 2016 (accepted). .
  39. Sharma B.L., Edge diffraction on triangular and hexagonal lattices: Existence, uniqueness, and finite section, Wave Motion, Vol. 65, 55-78, (2016). .
  40. Sharma B.L., Diffraction of waves on triangular lattice by a semi-infinite rigid constraint and crack, International Journal of Solids and Structures, Vol. 80, 465-485, (2016). .
  41. Sarkar S., Babu H., Sadique J., Interactions of separation bubble with oncoming wakes by large-eddy simulation, Journal of Heat Transfer, Vol. 138, -, (2016). .
  42. Saroj S.K., Asfer M., Sunderka A., Panigrahi P.K., Two-fluid mixing inside a sessile micro droplet using magnetic beads actuation, Sensors and Actuators, A: Physical, Vol. 244, 112-120, (2016). .
  43. Pradhan Kumar Tapan, Panigrahi Kumar Pradipta “Influence of an adjacent droplet on fluid convection inside an evaporating droplet of binary mixture” Colloids and Surfaces A: Physicochemical and Engineering Aspects,Vol. 500, pp. 154-165 (2016). .
  44. Samson A., Sarkar S., Effects of free-stream turbulence on transition of a separated boundary layer over the leading-edge of a constant thickness airfoil, Journal of Fluids Engineering, Transactions of the ASME, Vol. 138, -, (2016). .
  45. Saha A., Wahi P., Bhattacharya B., Characterization of friction force and nature of bifurcation from experiments on a single-degree-of-freedom system with friction-induced vibrations, Tribology International, Vol. 98, 220-228, (2016). .
  46. Rahaman A., Kar K.K., E-glass fibers coated with nickel phosphorous by electroless deposition technique, Composite Interfaces, Vol. 23, 689-699, (2016). .
  47. Pal A., Agarwal A.K., Effect of laser pulse energy on laser ignition of port fuel injected hydrogen engine, International Journal of Hydrogen Energy, Vol. 41, 675-682, (2016). .
  48. Nath D., Kalra M.S., Munshi P., Numerical simulation of time-dependent Navier-Stokes and MHD equations using a meshless method based on fundamental and particular solutions, Engineering Analysis with Boundary Elements, Vol. 67, 81-95, (2016). .
  49. Nath D., Kalra M.S., Munshi P., Application of MFS-MPS to the current-hole simulation in a Tokamak, Computers and Mathematics with Applications, Vol. 71, 1706-1721, (2016). .
  50. Nimdeo Y., Joshi M. Y., and Muralidhar K., Refractive Index Measurement of Sol Forming Laponite JS Dispersion Using Interferometry, accepted for publication in Applied Clay Science (2016). .
  51. Pradhan B., Kundu D., Bayes estimation for the Block and Basu bivariate and multivariate Weibull distributions, Journal of Statistical Computation and Simulation, Vol. 86, 170-182, (2016). .
  52. Biswal K.S., Mohapatra K. P., and Muralidhar K., Hydraulics of combining flow in a right-angled open channel junction, to appear in Sadhana (2016). .
  53. Usmani A. and Muralidhar K., Oscillatory flow in an enlarged compliant vasculature, accepted for publication in Biomedical Physics & Engineering Express (2016) .
  54. Katiyar J.K., Sinha S.K., Kumar A., Effects of carbon fillers on the tribological and mechanical properties of SU-8, Tribology - Materials, Surfaces & Interfaces, Vol. 10, 33-44, (2016). .
  55. Mahato A., Kumar A., Modeling transport phenomena of ice slurry in an ice forming unit, International Journal of Refrigeration, Vol. 69, 205-222 (2016). .
  56. Katiyar J.K., Sinha S.K., Kumar A., Friction and wear durability study of SU-8 composites with talc and graphite as fillers, Wear, http://dx.doi.org/10.1016/j.wear.2016.06.011 (2016). .
  57. Katiyar J.K., Sinha S.K., Kumar A., Effect of graphite concentration on the tribological and mechanical properties of filled SU-8”, Tribology Online, Vol. 11(2), 152-158 (2016). .
  58. Yadav M. K., Khandekar S. and Sharma P., An Integrated Approach to Steam Condensation Studies inside Reactor Containments: A Review, Nuclear Engineering and Design, Vol. 300, pp. 181-209, 2016, DOI: 10.1016/j.nucengdes.2016.01.004.
  59. Raghunandan Sharma and Kamal K. Kar, "Sustainably-derived nitrogen, oxygen and sulphur containing nanostructured carbon from poultry featherfiber as electrocatalyst for oxygen reduction reaction. ", Electrochimica Acta, International Society of Electrochemistry, Vol:191, pp:876-886, Year: 2016, doi:10.1016/j.electacta.2016.01.166, ISSN: 0013-4686, Elsevier B.V., UK.
2015
  1. Satish Kumara, V.K. Jain, Ajay Sidpara , "Precision Engineering, Volume 42, "Nanofinishing of freeform surfaces (knee joint implant) byrotational-magneto rheological abrasive flow finishing (R-MRAFF), ", 2015, 42, pp. 167-178.
  2. Manas Das, V.K. Jain, P.S. Ghoshdastidar , "International Journal of Advanced Manufacturing Technology", "A 2D CFD simulation of MR polishing medium in magnetic field-assisted finishing process using electromagnet, ", 2015, 66, pp. 173-187.
  3. V.K. Jain , "International Journal of Advanced Manufacturing Technology", "Editorial for Micromanufacturing", 2015, 76, pp. 1-2.
  4. Rajesh Madarkar and V.K. Jain , " Int. J. Precision Technology”, "Parametric analysis of magnetic abrasive deburring process", 2015, 5 (2), pp. 128-139.
  5. Jain V.K., Suthar V. Kulkarni, A.V. " Int. J. Precision Technology", "Fabrication of tapered micro-pillars on titanium alloy using electric discharge micromachining", 2015, 5 (2), pp. 97-113.
  6. Manoj Kumar and P. M. Dixit , "International Journal of Damage Mechanics", "A Non-linear Ductile Damage Growth Law", 2015, 24, 1070-1085.
  7. P. Sharma, R. Sarma, L. Chandra, R. Shekhar, P.S. Ghoshdastidar , "Solar Energy", "Solar Tower based Aluminium Heat Treatment System: Part I. Design and Evaluation of an Open Volumetric Air Receiver", 2015, 111, pp. 135-150.
  8. Sayan Sadhu and P.S. Ghoshdastidar , "ASME Journal of Heat Transfer", "Heat Flux Controlled Pool Boiling of Zirconia-Water and Silver-Water Nanofluids on a Flat Plate: A Coupled Map Lattice Simulation", 2015, 137, pp. 021503-1-9.
  9. B.S. Sikarwar, K. Muralidhar and S. Khandekar , "Interfacial Phenomena and Heat transfer (Kutataladze special issue)", "Dropwise condensation of metal vapour underneath inclined textured substrates", 2015, 3(1), pp. 85-113.
  10. Y. Nimdeo, Y.M. Joshi, and K. Muralidhar , "Industrial and Engineering Chemistry Research", "Measurement of mass diffusivity using interferometry through sensitivity Analysis", 2015, 102, pp. 207-215.
  11. S. Sarkar and Harish Babu , "ASME Journal of Turbomachinery", "Large Eddy Simulation on the Interactions of Wake and Film-Cooling Near a Leading Edge", 2015, 137, pp. 011005-1-11.
  12. K. Anand and S. Sarkar , "Sadhana, Springer publication", "Experimental Investigation of Separated Shear Layer from a Leading Edge Subjected to various Angles Of Attack with Tail Flap Deflections", 2015, 40, pp. 803-817.
  13. R. Datta, A. Jain, B. Bhattacharya, "Structural and Multidisciplinary Optimization"," A piezoelectric model based multi-objective optimization of robot gripper design", 2015, DOI 10.1007/ s00158-015-1340.
  14. Anmol Pandey, R. Datta, B. Bhattacharya, "Soft Computing", "Topology optimization of compliant structures and mechanisms using constructive solid geometry for 2-d and 3-d applications", 2015, DOI 10.1007/s00500-015-1845-8.
  15. Avinash Kumar Agarwal, Anuj Agarwal, Akhilendra Pratap Singh , "Measurement", "Time Resolved In-situ Biodiesel Combustion Visualization Using Engine Endoscopy”, pp. 236-249, . (ISSN# 0263-2241)", June 2015, 69, pp. 236-249.
  16. Anuj Pal, Avinash Kumar Agarwal , "International Journal of Hydrogen Energy", "Comparative Study of Laser Ignition and Convention Electric Spark Ignition Systems in a Hydrogen Fuelled Engine", 2015, 40(5), pp. 2386-2395 .
  17. Suraj Bhan Singh, Atul Dhar, Avinash Kumar Agarwal , "Renewable Energy", "Technical Feasibility Study of Butanol-Gasoline Blends for Powering Medium-Duty Transportation Spark Ignition Engine", 2015, 76, pp. 706–716.
  18. Rakesh Kumar Maurya, Avinash Kumar Agarwal , "ASME Journal of Energy Resource Technology", "Experimental Investigations of Particulate Size and Number Distribution in a Ethanol and Methanol Fuelled HCCI Engine", 2015, 137 (1), pp. 012201-10.
  19. Rakesh Kumar Maurya, Avinash Kumar Agarwal , "ASME Journal of Energy Resources and Technology", "Combustion and Emission Characterization of n-Butanol Fuelled HCCI Engine", 2015, 137 (1), pp. 011101-12.
  20. Anirudh Gautam, Avinash Kumar Agarwal , "FUEL", "Determination of Important Biodiesel Properties Based on Fuel Temperature Correlations for Application in a Locomotive Engine", 2015, 142, pp. 289-302.
  21. Atul Dhar, Avinash Kumar Agarwal , "Fuel", "Effect of Karanja Biodiesel Blends on Particulate Emissions from a Transportation Engine", 2015, 141, pp. 154-163 .
  22. Avinash Kumar Agarwal, Atul Dhar, Jai Gopal Gupta, Woong Il Kim, Kibong Choi, Chang Sik Lee, Sungwook Park , "Energy Conversion and Management", "Effect of Fuel Injection Pressure and Injection Timing of Karanja Biodiesel Blends on Fuel Spray, Engine Performance, Emissions and Combustion Characteristics", 2015, 91, pp. 302-314.
  23. Akhilendra Pratap Singh, Aditya Gupta, Avinash Kumar Agarwal , "SAE International Journal of Material and Manfacturing", "Tomographic Particle Image Velocimetry for Flow Analysis in a Single Cylinder Optical Engine", 2015, 8(2), pp. 472-481
  24. Atul Dhar, Avinash Kumar Agarwal , "Energy Conversion and Management ", "Experimental Investigations of the Effect of Pilot Injection on Performance, Emissions and Combustion Characteristics of Karanja Biodiesel Fuelled CRDI Engine", 2015, 93, pp. 357-366.
  25. Avinash Kumar Agarwal, Tarun Gupta, Prakhar Bothra, Pravesh Chandra Shukla , "Particuology", "Emission Profiling of Diesel and Gasoline Cars at a City traffic Junction", 2015, 18, pp. 186-193.
  26. Chetankumar Patel, Nachiketa Tiwari, Avinash Kumar Agarwal , "SAE Special Publication-2015", "Noise, Vibrations and Combustion Investigations of Preheated Jatropha Oil in a Single Cylinder Genset Engine", 2015, 1, pp. 1-10.
  27. Jai Gopal Gupta, Avinash Kumar Agarwal , "SAE Special Publication-2015", "Unregulated and Regulated Emissions from Biodiesel Fuelled CRDI SUV Engine", 2015, 01, pp. 0889
  28. Avinash Kumar Agarwal, Prakhar Bothra, Tarun Gupta, Pravesh Chandra Shukla , "Particuology", "Evaluation of Emission Profile of Two-Wheelers at a Traffic Junction", 2015, 18, pp. 112-119.
  29. Hemalatha Annepu, Jayati Sarkar, Sumit Basu , "Modelling and Simulation in Materials Science and Engineering", "Pattern formation in soft elastic films cast on periodically corrugated surfaces - A linear stability and finite element analysis. ", 2015, 22, pp. 055003.
  30. Vinay Kumar Patel, Anurup Ganguli, Rishi Kanta, Shantanu Bhattacharya , "RSC Adv., 2015, 5, 14967-14973 DOI: 10.1039/C4RA15476B ", "Micro-patterning of Nano-energetic Films of Bi2O3/Al for Pyrotechnics. ", 2015, 5, pp. 14967-14973.
  31. Ankur Gupta, Kunal Mondal, Ashutosh Sharma, Shantanu Bhattacharya , "RSC Adv., 2015, 5, 45897", "Superhydrophobic Polymethylsilisesquoxane pinned one dimensional ZnO nanostructures for water remediation through photo-catalysis. ", 2015, 5, pp. 45897.
  32. Ankur Gupta, Jayant Raj Saurav, Shantanu Bhattacharya , "RSC Advances", "Solar light based degradation of organic pollutants using ZnO nanobrushes for water filtration. ", 2015, 5, pp. 71472.
  33. Ankur Gupta, D. Singh, P. Raj, Himanshu Gupta, S. Verma, Shantanu Bhattacharya , "Journal of Bionanosciences ", "Antimicrobial investigation of ZnO-HAP nanocomposites for biomedical applications. ", 2015, 9, pp. 190-216
  34. Rajeev Kumar Singh, Rishi Kant, Sushant Singh, E. Suresh, Ankur Gupta, Shantanu Bhattacharya , "Microfluid Nanofluid ", "A novel helical micro-valve for embedded micro-fluidic applications.", 2015, 19, pp. 19-29.
  35. Vinay Kumar Patel, Jayant Raj Saurav, Keshab Gangopadhyay, Shubhra Gangopadhyay, Shantanu Bhattacharya , " RSC ", "Combustion Characterization and Modeling of Novel Nanoenergetic Composites of Co3O4/nAl. ", 2015, 5, pp. 21471-21479.
  36. V.K. Patel, Deepak Singh, Ankur Gupta, Rishi Kant and Shantanu Bhattacharya, “Surface function alization to mitigate fouling of biodevices: A critical review. ”, Reviews of Adhesion and Adhesives, 2015, In press.
  37. Basant Lal Sharma , "SIAM Journal on Applied Mathematics", "Diffraction of waves on square lattice by semi-infinite crack. ", , 75(3), 1171-1192, June, 2015.
  38. Basant Lal Sharma , "SIAM Journal on Applied Mathematics", "Near-tip field for diffraction on square lattice by crack. ", "SIAM Journal on Applied Mathematics", 75(4), 1915-1940 Aug 2015.
  39. Basant Lal Sharma , "Zeitschrift für angewandte Mathematik und Physik", "Near-tip field for diffraction on square lattice by rigid constraint. ", , 66(5), 2719-2740, March, 2015.
  40. Basant Lal Sharma , "Zeitschrift für angewandte Mathematik und Physik", "Discrete Sommerfeld diffraction problems on hexagonal lattice with a zigzag semi-infinite crack and rigid constraint. ", 66(6), 3591-3625, Sep, 2015.
  41. Basant Lal Sharma , Wave Motion, "Diffraction of Waves On Square Lattice by Semi-Infinite Rigid Constraint. ", 59(12), 52-68 Aug. 2015.
  42. S. Paik, SS Gupta, RC Batra , "Composite Structures ", "Localization of buckling modes in plates and laminates. ", 2015, 120, pp. 79-89.
  43. J.K. Katiyar, S.K. Sinha and A. Kumar, "Tribology - Materials, Surfaces & Interfaces", "Effects of carbon fillers on the tribological and mechanical properties of SU-8. ". (Accepted for publication on 27 Nov 2015).
  44. A. Mahato and A. Kumar , "International Journal of Refrigeration", "Modelling transport phenomena of ice slurry in an ice forming unit. ", 2015. (Accepted for publication on 18 Dec. 2015).
  45. R. Shukla and A. Kumar, "Journal of Thermal Spray Technology", "Substrate melting and re-solidification during impact of high-melting point droplet material. ", 2015, Vol. 24(8), 1368-1376.
  46. N. Sharma, T. Vimal and Anindya Chatterjee , "Zeitschrift fur Mathematik und Physik ZAMP", "Unexpectedly low angular extent of journal bearing pressures: experiment and theory. ", 66, 2015, pp. 455-471
  47. Shikha Prasad, Ahmed Abdulla, M. Granger Morgan, Ines L. Azevedo , "Progress in Nuclear Energy", "Nonproliferation Improvements and Challenges Presented by Small Modular Reactors. ", 2015, 80, pp. 102-109
  48. M. R. Gunjan, P. Somwanshi, Ayush Agarwal, S. Khandekar and K. Muralidhar, "Recoil of drops during coalescence on super-hydrophobic surfaces. ", Interfacial Phenomena and Heat transfer, Vol. 3 (2), pp. 1–18 (2015).
  49. M. Bajpai, P. Gupta, P. Munshi, “International Journal of High Performance Computing Applications”, " Fast multi-processor multi-GPU based algorithm of tomographic inversion for 3D image reconstruction. ”, , 29(2015), pp 64-72.
  50. M. Goswami, P. Munshi, A. Khanna, A. Saxena, “ IEEE Sensors Journal” ,"Nonuniform Arrangement of Emitter-Receiver Pairs Arrangement and Compact Ultrasonic Tomography Setup. ”, 15(2015), pp1198-1207.
  51. M. Goswami, S. Shakya, A. Saxena, P. Munshi, ’’NDT&E International”, "Reliable Reconstruction Strategy with higher Grid Resolution for Limited Data Tomography. " , 72(2015), pp 17-24.
  52. M. Goswami, S. Kumar, P. Munshi, “Flow Measurement and Instrumentation”, "Correlation between Numerical Simulation and Limited Data Experimental technique for Estimation of Nitrogen flowing in an LMMHD Loop. ", 46(2015), pp 80-86.
  53. S. Shakya, P. Munshi, A. Luke, D. Mewes, “Research in Nondestructive Evaluation” , "Computerized Tomography Application in Oil Industry using KT-2 Signature. ", 26(2015), pp 61-89.
  54. S. Shakya, P. Munshi, "Error Analysis of Tomographic Reconstructions in the Absence of Projection Data. ", Philosophical Transaction of Royal Society A: Mathematical Physical and Engineering Sciences, 373(2015), 20140394.
  55. Indrajit Chakraborty, Gautam Biswas, Satyamurthy Polepalle, Partha S. Ghoshadastidar, “Bubble Formation and Dynamics in a Quiescent High-Density Liquid”, AICHE Journal, Vol. 61, No.11, 2015 pp. 3996-4012.
  56. Anjali V. Kulkarni and V. K. Jain, "Design and Development of an Electrochemical Spark Micro Manufacturing Equipment. ", International Journal of Mechanical Engineering and Robotics Research, Vol.4, No. 4, pp. 368-372, October 2015. DOI: 10.18178/ijmerr.4.4.368-372.
  57. Rekha Raja, Ashish Dutta, K.S. Venkatesh. “New potential field method for rough terrain path planning using a Genetic Algorithm for a 6- wheel rover. ”, Robotics and Autonomous Systems, vol. 72, 2015, pp. 295-306.
  58. Abhishek Sarkar, Ashish Dutta. “8-DOF Biped Robot with Compliant-Link. ” Robotics and Autonomous systems, vol. 63, 2015, pp. 57-67.
  59. D. Nath, M. S. Kalra and P. Munshi, "One-stage Method of Fundamental and Particular Solutions (MFS–MPS) for the steady Navier–Stokes equations in a lid-driven cavity. ", Engineering Analysis with Boundary Elements, 58(0), 39–47, 2015.
  60. D. Nath, M. S. Kalra and P. Munshi, "Computation of Fixed Boundary Tokamak EquilibriaUsing a Method Based on Approximate Particular Solutions. ", Computers and Mathematics with Applications, 70(5), 1220–1233, 2015.
  61. Singh Dhananjay Kumar and Panigrahi P. K. " Three Dimensional Investigation of Liquid Slug Taylor Flow Inside a Micro Capillary Using Holographic Velocimetry. ", Experiments in Fluids, Vol. 56:6, pp. 1- 15 (2015).
  62. Qayoum Adnan and Panigrahi P. K. “Synthetic jet interaction with approaching turbulent boundary layer for heat transfer enhancement. ”, Heat Transfer Engineering, Vol. 36, Issue 4, (2015).
  63. A. Kumar, S.L. Das, P Wahi, "Instabilities of thin circular cylindrical shells under radial loading. ", International Journal of Mechanical Sciences, 104, 174-189, 2015
  64. R. Rusinek, M. Wiercigroch, P Wahi, "Orthogonal cutting process modelling considering tool-workpiece frictional effect. ", Procedia CIRP 31, 429-434, 2015.
  65. A. Saha, M. Wiercigroch, K. Jankowski, P. Wahi, "Investigation of two different friction models from the perspective of friction-induced vibrations. ", A Stefa & #324; ski, Tribology International 90, 185-197, 2015.
  66. A. Saha, P. Wahi, M. Wiercigroch, "A modified LuGre friction model for an accurate prediction of friction force in the pure sliding regime. ", A Stefański, International Journal of Non-Linear Mechanics, 2015.
  67. A. K. Mandal, P. Wahi, "Natural frequencies, modeshapes and modal interactions for strings vibrating against an obstacle: Relevance to Sitar and Veena. ", Journal of Sound and Vibration 338, 42-59, 2015
  68. Anish Kumar, Sovan Lal Das, Pankaj Wahi , "International Journal of Mechanical Sciences", "Buckling and Parametric Instability of Thin Walled Circular Cylindrical Shells Under Radially Fluctuating Pressure. ", 2015, In press, pp. In press.
  69. P. Sharma, R. Sarma, L. Chandra, R. Shekhar and P.S. Ghoshdastidar (2015): Solar Tower based Aluminum Heat Treatment System: Part I. Design and Evaluation of an Open Volumetric Air Receiver, Solar Energy, Vol. 111, pp. 135-150.
  70. Piyush Sharma, Rakesh Sarma, Laltu Chandra, Rajiv Shekhar and P.S. Ghoshdastidar (2015): On the Design and Evaluation of Open Volumetric Air Receiver for Process Heat Applications, Solar Energy, Vol. 121, pp. 41-55.
  71. Datta R., Pradhan S., Bhattacharya B. (2015): Analysis and Design Optimization of a robotic gripper using multi-objective Genetic Algorithm,IEEE Transactions on Systems, Man and Cybernetics: Systems, DOI 10.1109/TSMC.2015.2437847.
  72. Roy K., Bhattacharya B., Ray-Chaudhuri S., (2015): ARX model-based damage sensitive features for structural damage localization using output-only measurements, Journal of Sound and Vibration, Vol. 349, pp. 99-122.
  73. Misra K. Mohan, Bhattacharya B., Singh O., and Chatterjee A. (2015): A New Case-Depth Estimation Technique for Induction Hardened Plates Based on Dynamic Response Studies using Laser Doppler Vibrometer, Accepted in Journal of Systems and Control Engineering, Vol. 229, No. 1, pp 49-62.
  74. Hens, G. Biswas and S. De, Evaporation of water droplets on Pt-surface in presence of external electric field – A molecular dynamics study, The Journal of Chemical Physics, 143, 094702-1 – 094702-11, (2015).
  75. P. Randive, A. Dalal, K.C. Sahu, G. Biswas, P. Mukherjee, Wettability effects on contact line dynamics of droplet motion in an inclined channel, Physical Review E, Vol. 91, pp. 053006-1 – 053006-16, (2015).
  76. S. Biswas, P. Sharma, B. Mondal and G. Biswas, Analysis of Mixed Convective Heat Transfer in a Ribbed Channel using The Lattice Boltzmann Method, Numerical Heat Transfer Part A, Vol. 68, pp. 75-98, (2015).
  77. B. Ray, G. Biswas and A. Sharma, Regimes during liquid drop impact on a liquid pool, Journal of Fluid Mechanics, Vol. 768, pp. 492-523, (2015).
  78. D. Chatterjee and G. Biswas, Dynamic behavior of flow around rows of square cylinders kept in staggered arrangement, Journal of Wind Engineering and Industrial Aerodynamics, Vol. 136, pp. 1-11, (2015).
  79. Satish Chinchanikar, S.K. Choudhury, "Machining of hardened steel: Experimental investigations, performance modeling and cooling techniques: A review" International Journal of Machine Tools and Manufacture, Vol. 89, pp. 95-109, 2015.
  80. Satish Chinchanikar, S.K. Choudhury, "Predictive modeling for flank wear progression of coated carbide tool in turning hardened steel under practical machining conditions" International Journal of Advanced Manufacturing Technology, Vol. 76, pp. 1185-1201, 2015.
  81. Chandan Paul, M.K. Das, K. Muralidhar, "Three-dimensional Simulation of Pulsatile Flow through a Porous Bulge", Transport in Porous Media, Vol. 107(3), pp. 843-870, 2015
  82. Vishal Agarwal, Chandan Paul, M.K. Das, K. Muralidhar, "Effect of Coil Embolization on Blood Flow through a Saccular Cerebral Aneurysm", Sadhana, Vol. 40(3), pp. 875-887, 2015
  83. Laxminarsimha Rao V. and Das, S. L., "Drag force on a liquid domain moving inside a membrane sheet surrounded by aqueous medium, Journal of Fluid Mechanics, 779, 468, 2015.
  84. Božič, B., Das S. L., and Svetina, S., "Sorting of integral membrane proteins mediated by curvature-dependent protein-lipid bilayer interaction, Soft Matter, 11, 2479, 2015.
  85. K. Vogiatzaki, S. Navvaro-Martinez, Santanu De, A. Kronenburg. "Mixing modelling framework based on Multiple Mapping Conditioning for the prediction of turbulent flame extinction, Flow Turbulence Combust. ", 2015, DOI 10.1007/s10494-015-9626-0.
  86. Ayan Roychowdhury and Anurag Gupta. "Material homogeneity and strain compatibility in thin elastic shells. " Mathematics and Mechanics of Solids, available online, doi 10.1177/1081286515599438, 2015.
  87. Digendranath Swain and Anurag Gupta. "Interfacial Growth during Closure of a Cutaneous Wound: Stress Generation and Wrinkle Formation. ", Soft Matter, 11, pp. 6499-6508, 2015.
  88. Anup Basak and Anurag Gupta. "Plasticity in Multi-phase Solids with Incoherent Interfaces and Junctions. ", Continuum Mechanics and Thermodynamics, available online, doi 10.1007/s00161-015- 0441-6, 2015.
  89. Anup Basak and Anurag Gupta. "A Three-dimensional Study of Coupled Grain Boundary Motion with Junctions. " Proceedings of Royal Society London A, 471: 20150127, 2015.
  90. Anup Basak and Anurag Gupta. "Simultaneous Grain Boundary Motion, Grain Rotation, and Sliding in a Tricrystal. ", Mechanics of Materials, 90, pp. 229-242, 2015.
  91. Raghunandan Sharma and Kamal K. Kar, "Effects of structural disorder and nitrogen content on ORR electrocatalytic activity of CNx synthesized by pyrolysis of polyvinylpyrrolidone. ", Journal of Materials Chemistry A, Vol.:3, Pages: 11948-11959, Year:2015, DOI: 10.1039/c5ta02097b, Royal Society of Chemistry, UK (Impact factor: 7.449).
  92. Cherusseri Jayesh and Kamal K. Kar , "Petal-like carbon nanostructures grown on carbon fibers as electrode-cum-current collector for flexible supercapacitors. ", Journal of Materials Chemistry A, Vol.:3, Pages: xxxx, Year:2015, DOI:10.1039/C5TA05603A, Royal Society of Chemistry, UK (Impact factor: 7.449).
  93. Raghunandan Sharma and Kamal K. Kar , "Particle size and crystallographic orientation controlled electrodeposition of platinum nanoparticles on carbon nanotubes. ", Electrochimica Acta, International Society of Electrochemistry, Vol:156, pp:199-206, Year: 2015, doi:10.1016/j.electacta.2015.01.046, Elsevier B.V., UK (Impact factor: 4.578).
  94. Raghunandan Sharma and Kamal K. Kar , "Oxygen reduction reaction activity of nitrogen, oxygen and sulphur containing carbon derived from low-temperature pyrolysis of poultry featherfiber. ", Electrochimica Acta, International Society of Electrochemistry, Vol:156, pp:1054-1064, Year: 2015, doi:10.1016/j.electacta.2015.07.108, Elsevier B.V., UK (Impact factor: 4.578).
  95. Raghunandan Sharma and Kamal K. Kar , "Hierarchically structured catalyst layer for oxygen reduction reaction fabricated by electrode position of platinum on carbon nanotube coated carbon fiber platinum particle size on oxygen reduction activity of hierarchically structured Pt/CNT. ", RSC Advances, Vol.: 5, No.xx, pp.66518-66527, DOI: 10.1039/C5RA13866C,ISSN 2046-2069, Royal Society of Chemistry, UK (Impact factor: 3.907).
  96. Poonam Benjwal, Manish Kumar, Pankaj Chamoli and Kamal K. Kar , "Enhanced photocatalytic degradation of methylene blue and adsorption arsenic (III) by reduced graphene oxide (rGO) -metal oxide(TiO2/Fe3O4) based nanocomposites. ", RSC Advances, Vol.: 5, No.xx, pp.73249-73260, DOI:10.1039/C5RA13689J, ISSN 2046-2069, Royal Society of Chemistry, UK (Impact factor: 3.907).
  97. Cherusseri Jayesh and Kamal K. Kar , "Self-standing carbon nanotube forest electrodes for flexible supercapacitors. ", RSC Advances, Vol.:5, Pages: 34335-34341, Year:2015, DOI: 10.1039/C5RA04064G, ISSN: 2046-2069, Royal Society of Chemistry, UK (Impact factor:3.907).
  98. Raghunandan Sharma and Kamal K. Kar, "Sustainably-derived nitrogen, oxygen and sulphur containing nanostructured carbon from poultry featherfiber as electrocatalyst for oxygen reduction reaction. ", Electrochimica Acta, International Society of Electrochemistry, Vol:191, pp:876-886, Year: 2016, doi:10.1016/j.electacta.2016.01.166, ISSN: 0013-4686, Elsevier B.V., UK
  99. Chhatrasal Gayner and Kamal K. Kar, "Inherent room temperature ferromagnetism and dopant dependent Raman studies of PbSe, Pb1-xCuxSe, and Pb1-xNixSe. ", Journal of Applied Physics, Vol: 117, Page: 103906-1-8 (2015); Year:2015,doi: 10.1063/1.4914487, ISSN: 0021-8979, E-ISSN: 1089-7550, American Institute of Physics(Impact factor: 2.276).
  100. Poonam Benjwal and Kamal K. Kar, "One-step synthesis of Zn doped titania nanotubes and investigation of their visible photocatalytic activity. ", Materials Chemistry and Physics, Vol.160, Pages: 279-288, ISSN: 0254-0584, doi:10.1016/j.matchemphys.2015.04.038, Elsevier B.V., (Impact factor: 2.503, 2015.
  101. Poonam Benjwal and Kamal K. KaR, "Simultaneous photocatalysis and adsorption based removal of inorganic and organic impurities from water by titania/activated carbon/carbonized epoxy nanocomposite. ", Journal of Environmental Chemical Engineering, Vol. 3, No. 3, Pages: 2076-2083, Year:2015, ISSN: 2213-3437, doi:10.1016/j.jece.2015.07.009, Elsevier .
  102. B.V.Nagaraju Sykam, Rajeev K. Gautam, and Kamal K. Kar , "Electrical, mechanical, and thermal properties of exfoliated graphite/phenolic resin composite bipolar plate for polymer electrolyte membrane fuel cell. ", Polymer Engineering & Science, Volume: 55, No. 04, pp 917-923, Year: 2015, ISSN:0032-3888, DOI:10.1002/pen.23959, John Wiley & Sons, Inc. (Impact factor: 1.603) .
  103. Raghunandan Sharma, Amit K. Yadav, Vinay Panwar, and Kamal K Kar, "Viscoelastic properties of coil carbon nanotube coated carbon fiber reinforced polymer nanocomposites. ", Journal of Reinforced Plastics and Composites, Vol. 34, No. 12, Pages: 941-950 Year:2015, DOI: 10.1177/0731684415584432, SAGE Publishers, UK (Impact factor: 1.603).
  104. Soma Banerjee and Kamal K. Kar , "Synergistic effect of aluminium phosphate and tungstophosphoric acid on the physicochemical properties of sulfonated poly ether ether ketone nanocomposite membrane. ", Journal of Applied Polymer Science, Vol. xxx, No. xxx, Pages: xxxx, Year:2015, DOI: xxxxx, ISSN: 1097-4628 (Online), ISSN: 0021-8995 (Print), Wiley Publishers, USA (Impact factor: 1.780).
  105. S. Banerjee, Kamal K. Kar, Manas K. Ghorai and S. Das , "Synthesis of poly ether ether ketone membrane with pendent phosphonic acid group and determination of proton conductivity and thermal stability. ", High Performance Polymers, Year: 2015, Vol. 27, No. 04, PP.402-411, Print ISSN: 0954-0083, Online ISSN: 1361-6412, DOI: 10.1177/0954008314553643, Sage Publications,(Impact factor: 1.240).
  106. Rajeev Gautam, Soma Banerjee, Kamal K. Kar , "Bipolar plate materials for proton exchange membrane fuel cell application, Recent Patents on Materials Science. ", Volume: 8, Issue: 1, PP: 15-45, ISSN: 1874-4656 (Online), ISSN: 1874-4648 (Print), DOI:10.2174/1874464808666150306223104, Bentham Science Publishers, 2015.
  107. Rajeev K. Gautam and Kamal K. Kar , "Preparation, characterization, and properties of resole type phenolic resin/exfoliated graphite composite bipolar plates for PEM fuel cell. ", Advanced Science, Engineering and Medicine, Vol. 7(5), pp.429-434, year:2015, ISSN: 2164-6627 (print), EISSN: 2164-6635 (online), doi:10.1166/asem.2015.1709, American Scientific Publishers.
  108. Rajeev K. Gautam and Kamal K. Kar , "The effects of nano-sized carbon black content and particle sizes on the properties of carbon/phenolic composite bipolar plates. ", Journal of Multidisciplinary Engineering Science and Technology (JMEST), Vol. 2, No.2, pp.191-200, year:2015, ISSN: 3159-0040, JMESTN42350484.
  109. Pankaj Chamoli, Malay K. Das and Kamal K. Kar , "Green synthesis of less defect density bilayer graphene. ", Graphene, ISSN: 2167-275X (Print); EISSN: 2167-2768 (Online), Vol:3, No:xxx Page: xxxxx Year:2015, American Scientific Publishers.
  110. Srinivasan V., Marty-Jourjon V., Khandekar S., Lefèvre F. and Bonjour J., "Evaporation of an Isolated Liquid Plug Moving Inside a Capillary Tube. ", International Journal of Heat and Mass Transfer, Vol. 89, pp. 176-185, 2015. DOI: 10.1016/j.ijheatmasstransfer.2015.05.039.
  111. Rao M., Lefevre F., Khandekar S. and Bonjour J., "Heat and Mass Transfer Mechanisms of a Self-Sustained Thermally Driven Oscillating Liquid Vapor Meniscus. ", International Journal of Heat and Mass Transfer, Vol. 86, pp. 519-530, 2015. DOI: 10.1016/j.ijthermalsci.2015.01.008.
  112. Mehta B. and Khandekar S., "Local Experimental Heat Transfer of Single-phase Pulsating Laminar Flow in a Square Mini-channel. ", International Journal of Thermal Sciences, Vol. 91, pp. 157-166, 2015.DOI: 10.1016/j.ijthermalsci.2015.01.008.
  113. Vyas S., Khandekar S., Bouamrane N., Lefevre F. and Bonjour J., "Motion of an Isolated Liquid Plug inside a Capillary Tube: Effect of Contact Angle Hysteresis. ", Experiments in Fluids, Vol. 56:14 (6 pages), 2015. DOI: 10.1007/s00348-014-1881-7.
  114. B.S. Sikarwar, K. Muralidhar and S. Khandekar, "Dropwise condensation of metal vapour underneath inclined textured substrates. ", Interfacial Phenomena and Heat Transfer (Kutataladze special issue) Vol. 3(1), pp. 85-113 (2015) .
  115. Trushar Gohil, A.K. Saha, and K. Muralidhar, "Simulation of blooming phenomenon in forced circular jets. ", accepted for publication in Journal of Fluid Mechanics (2015).
  116. Aashutosh Mistry and K. Muralidhar, "Axisymmetric model of drop spreading on a horizontal surface. ", Physics of Fluids, Vol. 27, 092103, 26 pages (2015).
  117. K. Muralidhar and Malay K. Das, "Hydrate Reservoirs - Methane Recovery and CO2 Disposal. ", accepted for publication in the Proceedings of the Indian National Science Academy, special issue on Energy, Vol. 81(4), edited by Baldev Raj, Kamachi Mudali, and I. Manna (2015).
  118. Y. Rathee, B.R. Vinoth, P.K. Panigrahi, and K. Muralidhar, "Imaging flow during the impingement of differentially heated jets over a flat surface. ", accepted for publication in Nuclear Engineering and Design (2015).
  119. Y. Nimdeo, Y.M. Joshi, and K. Muralidhar, "Measurement of Mass Diffusivity by Light Streak Imaging. ", Chemical Engineering Research and Design, Vol. 102, pp. 207-215 (2015).
  120. Trushar Gohil, A.K. Saha, and K. Muralidhar, "Direct numerical simulation of free and forced square jets. ", International Journal of Heat and Fluid Flow, Vol. 52, pp. 169-184 (2015).
  121. Kathrin Burkhardt, Dominik Szczerba, Esra Neufeld, K. Muralidhar, Niels Kuster, "Parallel smoothing pressure correction solver for biomedical flow problems: Convergence criteria, preconditioning, scalability. ", accepted for publication in Progress in Computational Fluid Dynamics (2015).
  122. Chandan Paul, M.K. Das, and K. Muralidhar, "Three-dimensional simulation of pulsatile flow through a porous bulge. ", Transport in Porous Media, Vol. 107(3), pp. 843-870 (2015).
  123. Vishal Agarwal, Chandan Paul, M.K. Das, and K. Muralidhar, "Effect of coil embolization on blood flow through a saccular cerebral aneurysm. ", (Springer), Vol. 40(3), pp. 875-888 (2015).
  124. Tapan K. Pradhan and P.K. Panigrahi "Thermo-capillary convection inside a stationary sessile water droplet on a horizontal surface with an imposed temperature gradient. ", Experiments in Fluids, In Press (2015).
  125. Tapan K Pradhan and P K Panigrahi "Deposition pattern of interacting droplets. ", Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 482, pp. 562-567 (2015).
  126. Yogendra Rathee, B. R. Vinoth, P K Panigrahi, K Muralidhar "Imaging flow during impingement of differentially heated jets over a flat surface. ", Nuclear Engineering and Design, In Press (2015).
  127. M. Asfer, A. P. Prajapati, Arun Kumar and P K. Panigrahi "Visualization and motion of curcumin loaded iron oxide nanoparticles during magnetic drug targeting. ", ASME Journal of Nanotechnology in Engineering and Medicine , 6, pp. 011004 (1-8) (2015).
  128. Ramesh Erelli, Arun K. Saha and P.K. Panigrahi "Influence of Turn Geometry on Turbulent Fluid Flow and Heat Transfer in a Stationary TwoPass Square Duct. ", International Journal of Heat and Mass Transfer, In Press (2015).
  129. Qayoum Adnan, Panigrahi P.K. "Combined Influence of Synthetic Jet and Surface Mounted Rib on Heat Transfer in a Square Channel. " ASME Journal of Heat Transfer, 137, pp. 121004(1-12) (2015).
  130. B. Muralidharan, H. Chelladurai, J. Ramkumar, "Experimental Investigation on Electro-Discharge Deposition Process. ", International Mechanical Engineering Congress and Exposition .Volume 76, Issue 1-4, pp. 69-82.2015.
  131. Dharmesh Kumar, Syed N Akhtar, Anup K Patel, J. Ramkumar, Kantesh Balani, "Tribological Performance of Laser Peened Ti-6Al-4V. ", Journal of Wear, 322, 203-217, 2015
  132. Akhtar, Syed Nadeem; Sharma, Shashank; Dayal Singh, Govind; Ramakrishna, S;Ramkumar, J, "Microfeature edge quality enhancement in excimer laser micromachining of metal films by coating with a sacrificial polymer layer. ", JMM-100972 (accepted) , 2015.
  133. Syed Nadeem Akhtar, Shashank Sharma, S. Anantha Ramakrishna, and J. Ramkumar, "Excimer laser micromachining of oblique microchannels on thin metal films using square laser spot. ", Sadhana – Academy Proceedings in Engineering Science, (accepted), 2015.
  134. Durwesh Jhodkar, H chelladurai, M. Amarnath and J. Ramkumar, "Performance evaluation of Microwave Treated Cemented Carbide insert on AISI 1040 steel during turning process. ", Accepted in ASME 2015, Applied mechanics and materials conference. McMat2015-6318, 2015.
  135. Syed Nadeem Akhtar, Shashank Sharma, Govind Dayal, S Anantha Ramakrishna and J. Ramkumar, "Microfeature edge quality enhancement in excimer laser micromachining of metal fims by coating with a sacrifiial polymer layer. ", Journal of Micromechanics and Microengineering. , 2015.
  136. Nishith Verma, Prateek Khare, Janakaranjan Ramkumar, "Control of Bacterial Growth in Water using Novel Laser-Ablated Metal-Carbon-Polymer Nanocomposite-based Microchannels. ", Journal of Colloid and Interface Science (accepted), 2015.
  137. Saha, A. K., Srivastava, A., "Suppression of Vortex Shedding Around a Square Cylinder using Blowing. ", Sadhana, Academy Proceedings in Engineering Sciences (Springer), 2015.
  138. Gajbhiye, N., Eswaran, V., Saha, A. K., Kumar, A., "Numerical Calculation of Particle Collection Efficiency in an Electrostatic Precipitator. ", Sadhana, Academy Proceedings in Engineering Sciences (Springer), 2015.
  139. Desai, CK, Basu, S and Parameswaran, V, "Determination of traction separation law for interfacial failure in adhesive joints at different loading rates. ", THE JOURNAL OF ADHESION, 10.1080/00218464 .2015.1046986.
  140. Koohbor, B, Mallon, ., Kidane, A, Anand, A and Parameswaran, V, "Through thickness elastic profile determination of functionally graded materials. ", EXPERIMENTAL MECHANICS, 2015.
  141. Basu, B, Parameswaran, V, Wang, H, Lee, SH, "Dynamic compression behavior of reactive spark plasma sintered ultrafine grained (Hf,Zr)B2-SiC composites. ", Ceramics International, 41:7, 8468-74, Aug 2015.
  142. Acharya, SD, Bysakh, S, Parameswaran, V, Mukhopadhyay, AK, "Deformation and failure of alumina under high strain rate compressive loading. ", Ceramics International, 41:5, 6793-6801, JUN 2015.
  143. Faye A, Parameswaran V, Basu S, "Mechanics of dynamic fracture in notched polycarbonate. ", Journal of the Mechanics and Physics of Solids, 77, 43-60, Jan 2015.
  144. Ravi Sankar H, Adamvalli M, Prasad P. Kulkarni P. Prasad, Parameswaran V., "Dynamic strength of single lap joints with similar and dissimilar adherends. ", International Journal of Adhesion and Adhesivs, 56, 46-52, Jan 2015.
  145.   Agarwal A.K., Bothra P., Shukla P.C., Particulate characterization of CNG fuelled public transport vehicles at traffic junctions, Aerosol and Air Quality Research, Vol. 15, 2168-2174, (2015).
  146.  Agarwal A.K., Gupta P., Dhar A., Combustion, performance and emissions characteristics of a newly developed CRDI single cylinder diesel engine, Sadhana - Academy Proceedings in Engineering Sciences, Vol. 40, 1937-1954, (2015).
  147.  Agarwal A.K., Khurana D., Dhar A., Improving oxidation stability of biodiesels derived from Karanja, Neem and Jatropha: Step forward in the direction of commercialisation, Journal of Cleaner Production, Vol. 107, 646-652, (2015).
  148.  Agarwal A.K., Shukla P.C., Gupta J.G., Patel C., Prasad R.K., Sharma N., Unregulated emissions from a gasohol (E5, E15, M5, and M15) fuelled spark ignition engine, Applied Energy, Vol. 154, 732-741, (2015).
  149.  Agarwal A.K., Som S., Shukla P.C., Goyal H., Longman D., In-nozzle flow and spray characteristics for mineral diesel, Karanja, and Jatropha biodiesels, Applied Energy, Vol. 156, 138-148, (2015).
  150.  Shukla Chandra Pravesh, Gupta Tarun, Labhsetwar Kumar Nitin, Agarwal Kumar Avinash, Physico-Chemical Speciation of Particulates Emanating from Karanja Biodiesel Fuelled Automotive Engine, FUEL, Volume 162, pp. 84-90, December 2015. (Impact Factor2014: 3.520; DOI: 10.1016/j.fuel.2015.07.076; ISSN # 0016-2361).
  151.  Anand K., Sarkar S., Experimental investigation of separated shear layer from a leading edge subjected to various angles of attack with tail flap deflections, Sadhana - Academy Proceedings in Engineering Sciences, Vol. 40, 803-817, (2015).
  152.  Basak A., Gupta A., A three-dimensional study of coupled grain boundary motion with junctions, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 471, (2015).
  153.  Benjwal P., Kar K.K., Removal of methylene blue from wastewater under a low power irradiation source by Zn, Mn co-doped TiO2 photocatalysts, RSC Advances, Vol. 5, 98166-98176, (2015).
  154.  Bhargava N., Shanmugaiah V., Balakrishnan K., Ramkumar J., Das M., Comparing the adhesion and survival of adult rod and cone photoreceptor neurons on ‘poly-d-lysine’ and ‘concanavalin-A’ substrate, Journal of Biomaterials and Tissue Engineering, Vol. 5, 431-438, (2015).
  155.  Biswas S. and Chatterjee A. A two-state hysteresis model from high-dimensional friction. Royal Society Open Science, vol. 2, 2015, 150188. [DOI: http://dx.doi.org/10.1098/rsos.150188]
  156. Rakshit S. and Chatterjee A. Scalar generalization of Newtonian restitution for simultaneous impact. International Journal of Mechanical Sciences, vol. 103, 2015, 141-157. [DOI:10.1016/j.ijmecsci.2015.08.019]
  157. Cherusseri J., Kar K.K., Hierarchically mesoporous carbon nanopetal based electrodes for flexible supercapacitors with super-long cyclic stability, Journal of Materials Chemistry A, Vol. 3, 21586-21598, (2015).
  158.  Pal Vijay, Choudhury K. S., “Fabrication and analysis of complex-shape electrode/ tool for EDM by AWJM process” Int J of advances in material processing technology, 2015, Vol. 1(3-4), pp. 444-452.
  159. Dalawai P., Vyas N., Vibrational discomfort and motorcycle health assessment under engine excitation, International Journal of Vehicle Noise and Vibration, Vol. 11, 255-272, (2015).
  160.  Das S., Goswami G., Prasad J., Rangarajan R., Revisiting a pre-inflationary radiation era and its effect on the CMB power spectrum, Journal of Cosmology and Astroparticle Physics, Vol. 2015, -, (2015).
  161.  Epstein M., Roychowdhury A., Embedded homogeneity of beams in the nonlinear domain, International Journal of Solids and Structures, Vol. 58, 201-206, (2015).
  162.  Goswami M., Shakya S., Saxena A., Munshi P., Reliable reconstruction strategy with higher grid resolution for limited data tomography, NDT and E International, Vol. 72, 17-24, (2015).
  163.  Gupta A., Mondal K., Sharma A., Bhattacharya S., Super hydrophobic polymethyl silses quioxane pinned one dimensional ZnO nanostructures for water remediation through photo-catalysis, RSC Advances, Vol. 5, 45897-45907, (2015).
  164.  Gupta A., Singh D., Raj P., Gupta H., Verma S., Bhattacharya S., Investigation of ZnO-hydroxyapatite nanocomposite incorporated in restorative glass ionomer cement to enhance its mechanical and antimicrobial properties, Journal of Bionanoscience, Vol. 9, 190-196, (2015).
  165.  Gupta J.G., Agarwal A.K., Aggarwal S.K., Particulate emissions from karanja biodiesel fueled turbocharged CRDI sports utility vehicle engine, Journal of Energy Resources Technology, Transactions of the ASME, Vol. 137, -, (2015).
  166.  Hora T.S., Agarwal A.K., Experimental study of the composition of hydrogen enriched compressed natural gas on engine performance, combustion and emission characteristics, Fuel, Vol. 160, 470-478, (2015).
  167.  Jain V.K., Gehlot D., Anode shape prediction in through-mask-ECMM using FEM, Machining Science and Technology, Vol. 19, 286-312, (2015).
  168.  Kanchwala H., Wideberg J., Alba C.B., Marcos D., Control of an independent 4WD electric vehicle by DYC method, International Journal of Vehicle Systems Modelling and Testing, Vol. 10, 168-184, (2015).
  169.  Kar T., Agarwal A.K., Development of a single cylinder CNG direct injection engine and its performance, emissions and combustion characteristics, International Journal of Oil, Gas and Coal Technology, Vol. 10, 204-220, (2015).
  170.  Kumar M., Dixit P.M., Effect of crack closure parameter and negative triaxiality on damage growth in upsetting problem, Applied Mechanics and Materials, Vol. 84, 369-376, (2015).
  171.  Kumar P., Saxena A., On topology optimization with embedded boundary resolution and smoothing, Structural and Multidisciplinary Optimization, Vol. 52, 1135-1159, (2015).
  172.  Kumar V., Sinha S.K., Agarwal A.K., Tribological studies of epoxy and its composite coatings on steel in dry and lubricated sliding, Tribology - Materials, Surfaces and Interfaces, Vol. 9, 144-153, (2015).
  173.  Venkatesan S., Basu S., Investigations into crazing in glassy amorphous polymers through molecular dynamics simulations, Journal of the Mechanics and Physics of Solids, Vol. 77, 123-145, (2015).
  174.  Siva Prasad A.V.S., Basu S., Numerical modelling of shock-induced chemical reactions (SICR) in reactive powder mixtures using smoothed particle hydrodynamics (SPH), Modelling and Simulation in Materials Science and Engineering, Vol. 23, -, (2015).
  175.  Singh R.K., Kant R., Singh S., Suresh E., Gupta A., Bhattacharya S., A novel helical micro-valve for embedded micro-fluidic applications, Microfluidics and Nanofluidics, Vol. 19, 19-29, (2015).
  176.  Singh A.P., Gupta A., Agarwal A.K., Tomographic Particle Image Velocimetry for Flow Analysis in a Single Cylinder Optical Engine, SAE International Journal of Materials and Manufacturing, Vol. 8, -, (2015).
  177.  Sharma B.L., Discrete Sommerfeld diffraction problems on hexagonal lattice with a zigzag semi-infinite crack and rigid constraint, Zeitschrift fur Angewandte Mathematik und Physik, Vol. 66, 3591-3625, (2015).
  178.  Shakya S., Munshi P., Error analysis of tomographic reconstructions in the absence of projection data, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 373, -, (2015).
  179.  Patel V.K., Saurav J.R., Gangopadhyay K., Gangopadhyay S., Bhattacharya S., Combustion characterization and modeling of novel nanoenergetic composites of Co3O4/nAl, RSC Advances, Vol. 5, 21471-21479, (2015).
  180.  Patel V.K., Ganguli A., Kant R., Bhattacharya S., Micropatterning of nanoenergetic films of Bi2O3/Al for pyrotechnics, RSC Advances, Vol. 5, 14967-14973, (2015).
  181.  Pandiyan S., Parandekar P.V., Prakash O., Tsotsis T.K., Basu S., Systematic coarse graining of a high-performance polyimide, Macromolecular Theory and Simulations, Vol. 24, 513-520, (2015).
  182.  Pandey P., Pundir B., Role of fluid-dynamics in soot formation and microstructure in acetylene-air laminar diffusion flames, International Journal of Spray and Combustion Dynamics, Vol. 7, 25-38, (2015).
  183.  Pal A., Agarwal A.K., Effect of compression ratio on combustion, performance and emissions of a laser ignited single cylinder hydrogen engine, International Journal of Hydrogen Energy, Vol. 40, 12531-12540, (2015).
  184.  Padhye N., Mittal P., Deb K., Feasibility preserving constraint-handling strategies for real parameter evolutionary optimization, Computational Optimization and Applications, Vol. 62, 851-890, (2015).
  185.  Arya M., Khandekar S., Pratap D., Ramakrishna S. A., Pool Boiling of
    Water on Nano-structured Micro-wires at Sub-atmospheric Conditions, Heat and Mass Transfer, Accepted for publication, September, 2015. DOI:
    10.1007/s00231-015-1692-2.
2014
  1. R Rusinek, M Wiercigroch, P Wahi, "Modelling of frictional chatter in metal cutting", International Journal of Mechanical Sciences 89, 167-176, 2014.
  2. Gyana Ranjan Rana, Basant Singh Sikarwar, Sameer Khandekar, P. K. Panigrahi, "Hydrodynamics of a confined meniscus in a square capillary tube at low capillary numbers ", Frontier in Heat Pipes, 5, 1-12, (2014).
  3. Singh Dhananjay Kumar and Panigrahi P. K. "Three-dimensional instantaneous velocity field measurement using digital holography microscope" , Pramana – J. Phys., Vol. 82, No. 2, February, pp. 439-444, (2014). .
  4. AjaharKhana, Inamuddina, Mohammad Luqmanb, Ashish Dutta. “Kraton based Ionic Polymer Metal Composite (IPMC) Actuator”. Sensors & Actuators: A. Physical, vol. 216, 2014, pp. 295-300. .
  5. R. K. Jain, S. Datta, S. Majumder, A. Dutta. “Development of Multi Micro Manipulation System using IPMC Micro Grippers”. Journal of Intelligent and Robotic Systems, vol. 74, 2014, pp. 547-569. .
  6. D. Nath and M. S. Kalra, Numerical Solution of Grad–Shafranov Equation by the Method of Fundamental Solutions. Journal of Plasma Physics, 80(3), 477–494, 2014. .
  7. A.K. Trivedi, C. Allison, A. Khanna, P. Munshi, "RELAP5/ SCDAPSIM/MOD3.5 Analysis of the influence of Water Addition during a Core Isolation Event in a BWR", Nuclear Engineering and Design, 89(2014 ), pp 2956-2963. .
  8. S. Banerjee, K. K. Kar, M. K. Das , "Recent patents in Material Science", "Electrolyte Membranes for Fuel Cells: Synthesis, Characterization and Degradation Analysis", 2014, 7, pp. 173-203. .
  9. Vinoth B. R. and Panigrahi P. K. , "Physics of Fluids", "Characteris tics of low Reynolds number non-Boussinesq fountains from non-circular sources", 2014, 26, pp. 014106 (1-19) .
  10. Satish Chinchanikar, S.K. Choudhury , "Procedia of Material Science", "Characteristics of wear, force and their inter-relationship: In-process monitoring of tool within different phases of the tool life", 2014, 5, pp. 1424–1433. .
  11. Pankaj Saha, Gautam Biswas and S. Sarkar , "Int. Journal of Heat and Mass Transfer", "Comparison of winglet-type vortex generators periodically deployed in a plate-fin heat exchanger – A synergy based analysis", 2014, 74, pp. 292-305 . .
  12. Satish Chinchanikar, S.K. Choudhury , "Proc IMechE Part B: J Engineering Manufacture", "Experimental investigations to optimise and compare the machining performance of different coated carbide inserts", 2014, Vol. 228(9, pp. 1104–1117 . .
  13. Satish Chinchanikar, S.K. Choudhury , "Procedia of Material Science", "Machinability assessment through experimental investigation during hard and soft turning of hardened steel", 2014, 6, pp. 80–91. .
  14. Trushar Gohil, A.K. Saha, and K. Muralidhar , "ASME J. Fluids Engg., ", "Large eddy simulation of a free circular jet", 2014, 136, pp. 051205-1 to -14. .
  15. Manas Das, V. K. Jain, P.S. Ghoshdastidar , "International Journal of Precision Technology", "Estimation of Magnetic and Rheological Properties of MR Polishing Fluid and their Effects on Magnetic Field Assisted Finishing Process", 2014, 4, pp. 247-267. .
  16. P. Sarma, R. Sarma, L. Chandra, R. Shekhar, P.S.Ghoshdastidar , "Energy Procedia", "On the Design and Evaluation of Open Volumetric Air Receiver for Heat Applications", 2014, 57, pp. 2994-3003. .
  17. Ajay M. Sidpara and V.K.Jain , "Machining Science and Technology, 2014, Vol. 18, pp. 367-385. (DOI: 10.1080/10910344.2014.925372).", "Rheological properties and their correlation with surface finish quality in MR fluid based finishing process.", 2014, 18, pp. 367-385. .
  18. Saurav Goel, Waleed Bin Rashid, Xichun Luo, Anupam Agrawal and V.K. Jain , "Trans ASME. J. Manuf. Sci. Eng. 136(2), 021015 Paper No: MANU-12-1239; doi: 10.1115/1.4026297. ", "A theoretical assessment of surface defect machining and hot machining of nanocrystalline silicon carbide", 2014, 136(2), pp. 21015-1 to 21015-12. .
  19. V.K.Jain, Ajay Sidpara, R. Balasubramaniam, G.S. Lodha, V.P. Dhamgaye, R. Shukla , "Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, DOI: 10.1177/0954405414539487, Vol. 228 (9), August 2014, pp.973-994.", "Micromanufacturing: A Review-Part I", 2014, 228 (9), pp. 973-994. .
  20. Ankur Gupta, Shashank Shekhar Pandey, Monalisha Nayak, Shantanu Bhattacharya, "Hydrogen sensing based on nanoporous silica-embedded ultra dense ZnO nanobundles", RSC Adv., 4 (15), 7476 – 7482. , 2014.
  21. Harsh Biswari, Anukul P. Parahi, S.S.K. Iyer, M.Katiyar, P.K.Panigrahi "High resolution lock-in thermography investigation of organic solar modules", Progress in Photovoltaics: Research and Application, Under Review (2014).
  22. Yemei Liu, Keldren X. Z. Loy, Christina Lim and S. K. Sinha, Pre-polishing the metal counterface of metal-UHMWPE wear pair with filler filled UHMWPE composites to generate counterface changes to have an effective reduction in pure UHMWPE wear, Tribology Letters, 53(1) 11-16. (DOI: 10.1007/s11249-013-0239-2). (2014).
  23. Prabakaran Saravanan, Nalam Satyanarayana, Duong Hai Minh and Sujeet K Sinha, An in-situ heating effect study on tribological behavior of SU-8+PFPE composite, WEAR, 307 (1-2) 182- 189. (2014).
  24. Saurav Goel, Waleed Bin Rashid, Xichun Luo, Anupam Agrawal and V.K. Jain, A theoretical assessment of surface defect machining and hot machining of nanocrystalline silicon carbide, Trans ASME. (2014).
  25. Ajay M. Sidpara and V.K.Jain , Rheological properties and their correlation with surface finish quality in MR fluid based finishing process., Machining Science and Technology. (2014).
  26. Nath, D., Kalra, M.S., Numerical Solution of Grad-Shafranov Equation by the Method of Funda- mental Solutions , Journal of Plasma Physics. Doi: 10.1017/S0022377814000026. (2014).
  27. S. Shakya, M. Behling, P. Munshi, A. Luke, D. Mewes, "Analysis of Dynamic Bias Error in X- Ray Tomographic Reconstructions of a Three-Phase Flow System", International Journal of Multi-phase Flow, 58 , 57-71. (2014).
  28. Ramgadia, A. G., Saha, A. K., "Characteristics of Fully Developed Flow and Heat Transfer in Channels with Varying Wall Geometry", ASME J. Heat Transfer, Vol. 136, Article No. 021703, 2014.
  29. Vinoth B. R. and Panigrahi P. K. "Characteristics of low Reynolds number non-Boussinesq foun- tains from non-circular sources", Physics of Fluids, 26,014106 (1-19) (2014).
  30. Kewal Dharamshi, Avinash Kumar Agarwal, "Parametric Study of a Laser Ignited Hydrogen-Air Mixture in a constant Volume Combustion", Accepted for Publication in International Journal of Hydrogen energy, (Ref. No. HE-S-13-03845.pdf). (ISSN # 0360-3199), February 2014.
  31. Avinash Kumar Agarwal, Tabnmay Kar, "Developement of a Single Cylinder CNG Direct Injection Engine and its Performance, Emissions and Combustion Characteristics", Accepted for publication in International Journal of Oil Gas and Coal Technologies, (Ref. No. IJOGCT-62337) (ISSN # 1753-3309), February 2014.
  32. Gajendra Singh, Akhilendra Pratap Singh, Avinash Kumar Agarwal, "Experimental Investigation of Combustion, Performance and Emission Characterization of Biodiesel Fuelled HCCI Engine Using External Mixture Formation Technique", Accepted for Publication in Sustainable Energy Technologies and Assessment, (Ref. No. SETA-S-13-00191.pdf) (ISSN # 2213-1388) January 2014.
  33. Dhananjay Kumar Srivastava, Ernst Wintner , Avinash Kumar Agarawal, "Effect of focal Size on the laser Ignoition of Compresses Natural Gas-Air Mixture", Optics and Lasers in Engineering, Volume 58, pp 67-79. (ISSN # 0143-8166) , July 2014.
  34. Avinash KUmar Agarwal, Himanshu Karare, Atul Dhar, "Particulate Characterization of a Methanol- Gasoline Blend (Gasohol) Fuelled Medium Duty Spark Ignition Transportation Engine", Fuel Processing Technology, Volume 121, pp 16-24, (ISSN #0378-3820) , May 2014.
  35. Dhananjay Kumar Srivastava, Avinash Kumar Agarwal, "Comparative Experimental Evaluation of Performance, Combustion and Emissions of Laser ignition with Concentional Spark Plug in a Compresses natural Gas Fuelled Single Cylinder Engine", FUEL, Volume 123(1), pp 70-80 (ISSN#0016-2361) , March 2014.
  36. Atul Dhar, Avinash Kumar Agarwal, "Performance, Emissions and Combustion Characteristics of Karanja Biodiesel in a Transportation Engine", FUEL, Vol 119(1), pp 70-80. (ISSN # 0016-2361) , March-2014.
  37. Kewal Dharamshi, Dhananjay Kumar Srivastava, Avinash Kumar Agarwal, "Combustion Charac- teristics and Flame-Kernal Developement of a Laser Ignited Hydrogen-Air Mixture in a Constant Volume Combustion Chamber", International Journal of Hydrogen Energy, Vol 39, (1-2), pp 593-601 (ISSN # 0360-3199) , January 2014.
  38. Paras Gupta, Atul Dhar, Avinash Kumar Agarwal, "Experimantal Investigation of a Single Cylin- der Genset Engine with Common Rail Fuel Injection System", Thermal Science: International Scientific Journal, Vol 18, No 1, pp 249-258, (ISSN # 0354-9836) 2014.
  39. Avinash Kumar Agarwal, Prakhar Bothra, Tarun Gupta, Pravesh Chandra Shukla, "Evaluation of Emission Profile of Two Wheelers at a Traffic Junction", Accepted for Publication in Partic- uology, (Ref. No. JFUE-S-13-00194.pdf) (ISSN #1674-2001) January 2014.
  40. Sharma, I. Stability of rubble-pile satellites, Icarus, 229, 278-294. 2014.
  41. Suman Guha, Sandeep Sangal, Sumit Basu, On the fracture of samples under higher order strain gradient plasticity. In press, International Journal of Fracture, 2014.
  42. Sudharsan Pandiyan, Priya V. Parandekar, Om Prakash, Thomas K. Tsotsis, Nisanth N. Nair, Sumit Basu, Controlling the Sub-Molecular Motions to Increase the Glass Transition Temperature of Polymers. Chemical Physics Letters, v593, pp.24-27. , 2014.
  43. Goswami, M., Saxena, A. and Munshi, P, A new grid based tomographic method for two-phase flow measurements, Nuclear Science and Engineering, accepted. 2014.
  44. Anurag Gupta and David Steigmann. Plane Strain Problem in Elastically Rigid Finite Plasticity. Quarterly Journal of Mechanics and Applied Mathematics, to appear, (2014).
  45. S. Srivastava and A. Chatterjee. Planar oscillations of a boat in a tank. International Journal of Mechanical Sciences, 79, 152–161. 2014.
  46. S. Sarkar, S. Ganguly and G. Biswas, Buoyancy driven convection of nanofluids in an infinitely long cgannel under the effect of a magnetic field, International Journal of Heat and Mass Transfer, Vol. 71, pp. 328-340, (2014).
  47. Hens, R. Agarwal and G. Biswas, Nanoscale study of boiling and evaporation in a liquid Ar film on a Pt heater using molecular dynamics simulation, International Journal of Heat and Mass Transfer, Vol. 71, pp. 303-312 (2014).
  48. Hens, G. Biswas and S. De, Analysis of interfacial instability and multimode bubble formation in saturated pool boiling using Coupled Level Set and Volume- of- Fluid approach, Physics of Fluids, Vol. 26, pp. 012105-1 – 012105-14, (2014).
  49. Yang Pu, Jaidip Jagtap, Asima Pradhan and Robert R. Alfano, "Optical Spatial Frequency Quantitative Pathology of Cervical Intraepithelial Neoplasia in Human Tissues," J. Biophotonics 1-6 (2014). DOI 10.1002/jbio.201300184.
  50. Yang Pu, J. Jagtap, A. Pradhan, and R. R. Alfano, "Grading of cervical intraepithelial neoplasia using spatial frequency for optical histology," Proc. SPIE 8940, Optical Biopsy XII, 894016 (2014); doi: 10.1117/12.2035498.
  51. Seema Devi,and Asima Pradhan,"Polarized fluorescence confocal microscopy for cervical precancer detection", Proceedings of DAE-BRNS National Laser Symposium (NLS-22), Manipal University, Manipal, Jan. 8-11, 2014.
  52. Kattekola B, Desai CK, Parameswaran V, Basu S, Critical Evaluation of a Constitutive Model for Glassy Polycarbonate, EXPERIMETAL MECHANICS, 54:3, 357-368, MAR 2014.
  53. Gupta N, Basu B, Parameswaran V, Microstructure Development, Nanomechanical, and Dynamic Compression Properties of Spark Plasma Sintered TiB2-Ti-Based Homogeneous and Bi-layered Composites, METALLURGICAL AND MATERIALS TRANSACTIONS A, DOI 10.1007/s11661-014-2383-1, 2014.
  54. Ravi Sankar H, Adamvalli M, Prasad P. Kulkarni P. Prasad, Parameswaran V., Dynamic strength of single lap joints with similar and dissimilar adherends, INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, http://dx.doi.org/10.1016/j.ijadhadh. 2014.07.014, 2014.
  55. A Faye, V Parmeswaran, S Basu; Mechanics of Dynamic Fracture in Polycarbonate, - Procedia Materials Science, 2014.
  56. Samson, A. and Sarkar, S., Effects of Free-stream Turbulence on Transition of a Separated Shear Layer Over the Leading-edge of a Constant Thickness Aerofoil: submitted to ASME Journal of Fluids Engineering, Paper No. FE-14 -1200.
  57. Samson, A. and Sarkar, S., An Experimental Investigation of a Laminar Separation Bubble on the Leading edge of a Modeled Aerofoil for different Reynolds Numbers: submitted to ImechE Journal of Mechanical Engineering Sciences, Paper No. JMES-14- 0352.
  58. T.V. K. Gupta, J. Ramkumar, Puneet Tandon and N. S. Vyas , "State of the art on Abrasive Water Jet milling: Challenges ahead", pp 639, 2014.
  59. Ajay Vardhaman, Durwesh Jhodkar, J. Ramkumar, M. Amarnath, H. Chelladurai "Tool wear assessment in turning AISI 1040 steel using cutting force signature analysis", pp 577, 2014.
  60. Surendra Kumar, U. Srinivas Rao and J.Ramkumar "Effect of Minimum Uncut Chip Thickness (MUCT) on Theoretical Surface finish in Mechanical Micro-machining", pp 506, 2014.
  61. Dharmesh Kumar ; Syed N Akhtar ; Anup K Patel; J. Ramkumar ; Dr. Kantesh Balani, Tribological Performance of Laser Peened Ti-6Al-4V" Journal of Wear, 2014.
  62. SN Akhtar, J Ramkumar, "Influence of plasma plume absorption and ambient gas on excimer laser micromachining of polymers" has been submitted to the Journal of Laser Applications. The tracking number is 14056.(Under Progress), 2014.
  63. G Karthikeyan, J Ramkumar, S Dhamodaran "BlockEDG : Issues and applicability in multiple pass µED-MILLING', Machining Science and Technology 18 (1), 120-136, 2014.
  64. RK Porwal, V Yadava, J Ramkumar ," Modelling and multi-response optimization of hole sinking electrical discharge micromachining of titanium alloy thin sheet "Journal of Mechanical Science and Technology 28 (2), 653-661, 2014.
  65. D Jhodkar, M Amaranth, H Chelladurai, J Ramkumar Experimental Investigations on the Effect of Vegetable Based Cutting Fluid in Turning AISI 1040 Steel Applied Mechanics and Materials 541, 368-373, 2014.
  66. Syed Nadeem Akhtar, Hirendra Choudhary, S Anantha Ramakrishna and J Ramkumar, "Simulation and experiments on excimer laser micromachining of metal and polymer" 13 (1), 013008-013008, 2014.
  67. Samson, A. and Sarkar, S., An Experimental Investigation of a Laminar Separation Bubble on the Leading edge of a Modeled Aerofoil for different Reynolds Numbers: submitted to ImechE Journal of Mechanical Engineering Sciences, Paper No. JMES-14 - 0352. (Under Review)
  68. Samson, A. and Sarkar, S., Effects of Free-stream Turbulence on Transition of a Separated Shear Layer Over the Leading-edge of a Constant Thickness Aerofoil: submitted to ASME Journal of Fluids Engineering, Paper No. FE-14 -1220. (Under Review)
  69. Brindan Tulachan, Sunil Meena, Ratan Rai, Chandrakant Mallick, Tejas Kusurkar, Arun Kumar Teotia, Niroj Sethy, Kalpana Bhargava, Shantanu Bhattacharya, Ashok Kaul, Raj Kishore Sharma, Neeraj Sinha, Sushil Singh, and Mainak Das, Electricity from the Silk Cocoon Membrane, Nature Scientific Reports , 4 : 5434 | DOI: 10.1038/srep05434, 2014.
  70. Rishi Kant, Shantanu Bhattacharya, Optimization of laser micromachining process for fabrication of a portable piezo based micropump for field applications, Microelectronic Engineering, 2014, (Manuscript under review).
  71. Seema D. Yardi, Ankur Gupta, Rishi Kant, D. Boolchandani, Shantanu Bhattacharya, High efficiency coupling of optical fibres with SU8 micro-droplet using laser welding process, Optics and Laser in Engineering, 2014, (Manuscript under review).
  72. Vinay Kumar Patel, Ankur Gupta, Deepak Singh, Shantanu Bhattacharya, interaction of Biomolecules with solid polymeric and other surfaces for development of microchips and microarrays, Applied Surface Science, 2014,(Manuscript under review).
  73. Vinay Kumar Patel, Himanshu Singh, Jayant Raj Saurabh, HarshVardhan, Keshab Gangopadhyay, Shubhra Gangopadhyay, Shantanu Bhattacharya, Novel nanoscale synthesis of Co3O4 and nano-Aluminum Fuel composites and modeling their combustion performance with density function theory (DFT), ACS Applied Materials and Interfaces, 2014, (Manuscript under review).
  74. Vinay K. Patel, Ankur Gupta, Rishi Kant, Shantanu Bhattacharya, Development of Nanoenergetic Films of Bi2O3 Nanosquaretablets/Al on Silicon Substrate, RSC Advances, 2014(Manuscript under review).
  75. Sushant Singh, Santosh Kumar, E. Suresh, Rajeev Kr. Singh, Ankur Gupta, Rishi Kant, Shantanu Bhattacharya, A novel solenoidal microvalve for embedded microfluidics applications, Microfluidics Nanofluidics, 2014, (Manuscript under review).
  76. Anurag Meher, Sushant Singh, Vinay K. Patel, Anurup Ganguly, P.K. Panigrahi, Shantanu Bhattacharya, Study of shock wave characteristics using Schliren imaging for nanoenergetic composites, Propellents, Explosives and Pyrotechniques, 2014,(Manuscript under preparation).
  77. Anurup Ganguly, Vinay K. Patel, Deepak Singh, Maniak Das, Keshab Gangopadhyay, Shubhra Gangopadhyay, Shantanu Bhattacharya, A novel high yield gene-delivery technique using shock wave electrophoresis combination, Nature Scientific Reports, 2014, (Manuscript under preparation.
  78. R.K. Arun, K. Chaudhury, M. Ghosh, G. Biswas, N. Chanda and S. Chakraborty, Controlled splitting and focusing of a stream of nanoparticles in a converging-diverging microchannel, Lab on a Chip, Vol. 14, pp. 3800-3008, (2014)
  79. A.Hens, G. Biswas and S. De, Analysis of interfacial instability and multimode bubble formation in saturated pool boiling using Coupled Level Set and Volume- of- Fluid approach, Physics of Fluids., Vol. 26, pp. 012105-1 – 012105-14, (2014)
  80. Satish Chinchanikar, S.K. Choudhury, "Evaluation of chip-tool interface temperature: Effect of tool coating and cutting parameters during turning hardened AISI 4340 steel" Procedia of Material Science, Vol. 6, pp. 996-1005, 2014.
  81. Satish Chinchanikar, S.K. Choudhury, "Hard turning using HiPIMS-coated carbide tools: Wear behavior under dry and minimum quantity lubrication (MQL)" Measurement, Vol. 55, pp. 536- 548, 2014.
  82. G. Bartarya, S.K. Choudhury, "Influence of Machining Parameters on Forces and Surface Roughness during Finish Hard Turning of EN 31 steel", Proc. of IMechE Part B, Journal of Engineering Manufacture, Sep 2014, Vol. 228, pp 1068-1080, DOI: 10.1177/0954405413500492.
  83. Mahata, P and Das, S. L.: Two-dimensional convex molecule fluid model for surface adsorption of proteins: Effect of soft interaction on adsorption equilibria, Physical Review E, 90, 062713, 2014.
  84. Abhishek Sarkar, Ashish Dutta." 8 DOF biped robot with compliant links". Robotics and Autonomous Systems, 2014.
  85. Anup Basak and Anurag Gupta. A Two-Dimensional Study of Coupled Grain Boundary Motion using Level Set Method. Modeling and Simulation in Material Science and Engineering, 22(5), 055022., 2014.
  86. Deepti Verma, S. S. Gupta and R. C. Batra, Vibration mode localization in single- and multi-layered graphene nanoribbons, Computational Materials Science, Vol. 95, 41-52, 2014.
  87. V.K.Jain, Ajay Sidpara, R. Balasubramaniam, G.S. Lodha, V.P. Dhamgaye, R. Shukla Micromanufacturing: A Review-Part I, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,DOI: 10.1177/0954405414539487.
  88. V.K.Jain, U.S.Dixit, C.P.Paul, Arvind Kumar, Micromanufacturing: A Review-Part II, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, DOI: 10.1177/0954405414539492.
  89. V.K.Jain and Priyadarshani Deepshikha, Fabrication of microchannels in ceramics (Quartz) using electrochemical spark micromachining (ECSM), Int. J. Advanced Manufacturing Systems, 13, 5 (2014). pp. 5-16. DOI: 10.1142/S0219686714500012, 2014.
  90. Ariful Rahaman and Kamal K. Kar , Carbon nanomaterials grown on E-glass fibers and their application in composite Authors: Composites Science and Technology, Volume: 101, pp 001-010, ISSN:0266-3538, DOI:10.1016/j.compscitech.2014.06.019, Elsevier B.V. (Impact factor: 4.479), 2014.
  91. Raghunandan Sharma and Kamal K. Kar, Carbon nanotube coated carbon fiber based composite filaments for luminescent bulbs , Materials Letters, Volume: 137, No.xx pp 150-152, Year: 2014, ISSN:0167-577X, DOI:10.1016/j.matlet.2014.09.003, Elsevier B.V. (Impact factor: 2.489).
  92. Nagaraju Sykam, and Kamal K. Kar, Rapid synthesis of exfoliated graphite by microwave irradiation and oil sorption studies, Materials Letters, Volume: 137, No.xx pp 150-152, Year: 2014, ISSN:0167-577X, DOI:10.1016/j.matlet.2014.09.003, Elsevier B.V. (Impact factor: 2.489)
  93. Nagaraju Sykam and Kamal K. Kar, Easy approach and scalable synthesis of bilayer graphene, Graphene, ISSN: 2167-275X (Print); EISSN: 2167-2768 (Online), Vol:2, No:1 Page:52-56 Year:2014, American Scientific Publishers.
  94. S. Banerjee, Kamal K. Kar , Particulate Filled Polymer Electrolyte Membrane for Fuel Cell Application, Recent Patents on Materials Science, Volume: 7, Issue: 2, PP: 131-150, Year: 2014, ISSN: 1874-4656 (Online), ISSN: 1874-4648 (Print), DOI: 10.2174/1874464807666140528003109, Bentham Science Publishers.
  95. Mehta B. and Khandekar S., Taylor Bubble-train Flow and Heat Transfer in the Context of Pulsating Heat Pipes, International Journal of Heat and Mass Transfer, Vol. 79, pp. 279-290, 2014. DOI:10.1016/j.ijheatmasstransfer.2014.08.005.
  96. Mehta B. and Khandekar S., Measurement of Local Heat Transfer Coefficient during Gas-liquid Taylor Bubble Train Flow by Infrared Thermography, International Journal of Heat and Fluid Flow, 45, pp. 41-52, 2014. DOI: 10.1016/j.ijheatfluidflow.2013.12.001.
  97. Karthikeyan V. K., Khandekar S., Pillai B. C. and Sharma P., Infrared Thermography of Pulsating Heat Pipe: Flow Regimes and Multiple Steady States, Applied Thermal Engineering, Vol. 62, Issue 2, pp. 470-480, 2014. DOI: 10.1016/j.applthermaleng.2013.09.041.
  98. Mameli M., Marengo M. and Khandekar S., Local Heat Transfer Measurement and Thermo-fluid Characterization of a Pulsating Heat Pipe, International Journal of Thermal Sciences, Vol. 75, pp. 140-152, 2014. DOI: 10.1016/j.ijthermalsci.2013.07.025.
  99. M. Goswami, A. Saxena, P. Munshi, "A New Grid Based Tomographic Method for Two-Phase Flow Measurement", Nuclear Science and Engineering, 176(2014), pp 240-253.
  100. Rajesh Kumar Porwal, Vinod Yadava, J. Ramkumar, Neural Network based Modeling and GRA coupled PCA Optimization of Hole Sinking Electro Discharge Micromachining, International Journal of Manufacturing, Materials, and Mechanical Engineering.4(1), pp. 1-21.2014.
  101. K Pallav, P Han, J Ramkumar, KF Ehmann, Comparative Assessment of the Laser Induced Plasma Micromachining and the Micro-EDM Processes, Journal of Manufacturing Science and Engineering 136 (1), 011001, 2014.
  102. R Rusinek, M Wiercigroch, P Wahi, "Influence of Tool Flank Forces on Complex Dynamics of Cutting Process", International Journal of Bifurcation and Chaos 24 (09), 1450115, 2014. .
  103. A Saha, P Wahi "An analytical study of time-delayed control of friction-induced vibrations in a system with a dynamic friction model", International Journal of Non-Linear Mechanics 63, 60-70, 2014.
  104. M. Goswami, P. Munshi, A. Saxena, M. Kumar, A. Kumar, " Plasma diagnostics at Aditya Tokamak by two views visible light tomography", Fusion Engineering and Design, 89(2014), pp 2659-2665. .
  105. A.K. Trivedi, K.T. Sandeep, C. Allison, A. Khanna, V. Chaudhari, E.R. Kumar, P.Munshi, "Incorporation of lithium lead eutectic as a working fluid in RELAP5 and preliminary safety assessment of LLCS", Fusion Engineering and Design, 89(2014), pp 2956-2963. .
  106. Anirban Guha, Gregory A. Lawrence , "Journal of Fluid Mechanics", "A wave interaction approach to studying non-modal homogeneous and stratified shear instabilities", 2014, 755, pp. 336-364. .
  107. Prasun Jana and Anindya Chatterjee , "International Journal of Mechanical Sciences", "An internal damping formula derived from dispersed elasto-plastic flaws with Weibull-distributed strengths", 2014, 87, pp. 137-149. .
  108. B U Taskar, D DasGupta, V Nagarajan, S Chakraborty, Anindya Chatterjee and O P Sha , "Ocean Engineering", "CFD aided modelling of anti-rolling tanks towards more accurate ship dynamics", 2014, 92, pp. 296-303. .
  109. D Verma, SS Gupta, RC Batra , "Computational Material Science", "Vibration mode localization in single-and multi-layered graphene nanoribbons ", 2014, 95, pp. 41-52 .
  110. Paritosh Mahata Sovan Lal Das , "Physical Review E", "Two-dimensional convex-molecule fluid model for surface adsorption of proteins: Effect of soft interaction on adsorption equilibria", 2014, 90, pp. 062713. .
  111. Ankur Gupta, Abhinav Srivastava, Cherian Joseph Mathai, Keshab Gangopadhyay, Shubhra Gangopadhyay, Shantanu Bhattacharya , "Sensor letters, 12, 1279-1285 , 2014 ", "Nanoporous Palladium sensor for sensitive and rapi detection of Hydrogen", 2014, 12, pp. 1279-1285. .
  112. Akshay Atwe, Ankur Gupta, Rishi Kant, Shayandev Sinha, Ishan Sharma, Shantanu Bhattacharya , "Microsystems Technology, DOI 10.1007/s00542-014-2112-0, 2014", "A novel microfludic switch for pH control using Chtosan based Hydrogels. ", 2014, 20, pp. 1373-1381. .
  113. G Karthikeyan, J Ramkumar, S Dhamodaran , "Machining Science and Technology ", "Block EDG: issues and applicability in multiple pass µED-milling", 2014, 18 (1), pp. 120-136. .
  114. J.M. Jafferson, P. Hariharan and J. Ram Kumar , "Materials and Manufacturing Processes", "Effects of Ultrasonic Vibration and Magnetic Field in Micro-EDM Milling of Nonmagnetic Material", 2014, v 29, pp. 357-363. .
  115. Suman Guha, Sandeep Sangal, Sumit Basu , "International Journal of Fracture ", "On the fracture of small samples under higher order strain gradient plasticity.", 2014, 187, pp. :10.1007/s10704-014-9933-9. .
  116. Gupta S, Parameswaran V, Sutton MA, Shukla A , "PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES", "Study of dynamic underwater implosion mechanics using digital image correlation", 2014, 470, pp. 2172. .
  117. Suman Guha, Sandeep Sangal, Sumit Basu , "International Journal of Material Forming ", "Numerical investigations of flat punch molding using a higher order strain gradient plasticity theory.", 2014, 7, pp. DOI:10.1007/s12289-013-1141-z. .
  118. Dhananjay Kumar Srivastava, Ernst Wintner, Avinash Kumar Agarwal , "Optics and Lasers in Engineering", "Effect of Focal Size on the Laser Ignition of Compressed Natural Gas-Air Mixture", 2014, 58, pp. 67-79. .
  119. Avinash Kumar Agarwal, Atul Dhar, Jaigopal Gupta, Woong Il Kim, Chang Sik Lee, Sungwook Park , "Applied Energy", "Effect of Fuel Injection Pressure and Injection Timing on Spray Characteristics and Particulate Size -Number Distribution in a Biodiesel Fuelled Common Rail Direct Injection Diesel Engine", 2014, 130, pp. 212-221. .
  120. Atul Dhar, Avinash Kumar Agarwal , "FUEL", "Experimental Investigation of Effect of Karanja Biodiesel Blend on Tribological Properties of Lubricating Oil in a Compression Ignition Engine", 2014, 130, pp. 112-119. .
  121. Atul Dhar, Avinash Kumar Agarwal , "FUEL", "Effect of Karanja Biodiesel Blends on Engine Wear in a Transportation Engine", 2014, 134, pp. 81-89. .
  122. Rakesh Kumar Maurya, Avinash Kumar Agarwal , "Fuel Processing Technology", "Experimental Investigations of Performance, Combustion and Emission Characteristics of Ethanol and Methanol Fuelled HCCI Engine", 2014, 126, pp. 38-48. .
  123. Rakesh Kumar Maurya, Avinash Kumar Agarwal , "International Journal of Engine Research", "Effect of Intake Air Temperature and Air-Fuel Ratio on Particulates in Gasoline and n-Butanol Fuelled HCCI Engine", 2014, 15(7), pp. 789-804. .
  124. Kewal Dharamshi, Avinash Kumar Agarwal , "International Journal of Hydrogen Energy", "Parametric Study of a Laser Ignited Hydrogen-Air Mixture in a Constant Volume Combustion Chamber", 2014, 39 (35), pp. 20207-20215. .
  125. Nagaraju Sykam and Kamal K. Kar , "Graphene, American Scientific Publishers", "Easy approach and scalable synthesis of bilayer graphene", 2014, 2, pp. 52-56. .
  126. P. Sarma, R. Sarma, L. Chandra, R. Shekhar, P.S.Ghoshdastidar , "Energy Procedia", "On the Design and Evaluation of Open Volumetric Air Receiver for Heat Applications", 2014, 57, pp. 2994-3003. .
  127. Ajay M. Sidpara and V.K.Jain , "Machining Science and Technology, 2014, Vol. 18, pp. 367-385. (DOI: 10.1080/10910344.2014.925372).", "Rheological properties and their correlation with surface finish quality in MR fluid based finishing process.", 2014, 18, pp. 367-385. .
  128. Saurav Goel, Waleed Bin Rashid, Xichun Luo, Anupam Agrawal and V.K. Jain , "Trans ASME. J. Manuf. Sci. Eng. 136(2), 021015 Paper No: MANU-12-1239; doi: 10.1115/1.4026297. ", "A theoretical assessment of surface defect machining and hot machining of nanocrystalline silicon carbide", 2014, 136(2), pp. 21015-1 to 21015-12. .
  129. V.K.Jain, Ajay Sidpara, R. Balasubramaniam, G.S. Lodha, V.P. Dhamgaye, R. Shukla , "Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, DOI: 10.1177/0954405414539487, Vol. 228 (9), August 2014, pp.973-994.", "Micromanufacturing: A Review-Part I", 2014, 228 (9), pp. 973-994. .
  130. Manas Das, V.K.Jain, P.S.Ghoshdastidar , "Int. J. Precision Technology, Vol. 4, Nos. 3/4, 2014. ", "Estimation of magnetic and rheological properties of MR polishing fluid and their effects on magnetic field assisted finishing process", 2014, 4 (3, 4).
2013
  1. Rajeev Kumar Singh, Ankur Gupta, Shantanu Bhattacharya, "Fabrication of solenoidal micro-valve in PDMS using 3D soft lithography techniques", Microsystems Technologies, 2013, DOI: 10.1007/s00542-013-1738-7.
  2. Monalisha Nayak, Deepak Singh, Himanshu Singh, Rishi Kant, Ankur Gupta, Shashank Shekhar Pandey, Swarnasri Mandal, Gurunath Ramanathan & Shantanu Bhattacharya, "Integrated sorting, concentration and realtime PCR de-tection system for sensitive detection of Micro-organisms", Accepted in Nature Scientific Reports for publication, Date of online publication 20/11/2013.
  3. Avinash Kumar , Ankur Gupta , Rishi Kant , Syed Nadeem Akhtar , Nachiketa Tiwari , J. Ramkumar , Shantanu Bhattacharya , "Optimization of LASER machining process for the preparation of photo masks and its application to Micro-systems fabrication", Accepted in Journal of Micro/Nano Lithography, MEMS and MOEMS, In Press, 2013.
  4. Abhinav Srivastava, Ankur Gupta, Cherian Joseph Mathai, Keshab Gangopadhyay, Shubhra Gangopadhyay, Shantanu Bhattacharya, "Nanoporous Palladium sensor for sensitive and rapid detection of Hydrogen", Under review , Sensor Letters, 2013, In press.
  5. Akshay Atwe, Ankur Gupta, Rishi Kant, Shayandev Sinha, Ishan Sharma, Shantanu Bhattacharya, "A novel microfludic switch for pH control using Chtosan based Hydrogels", Accepted in Microsystems Technology.
  6. Yemei Liu and S. K. Sinha, Mechanical and tribological properties of PEEK particle-filled UHMWPE composites: The role of counterface morphology change in dry sliding wear, J. Reinforced Plastics & Composites, 2013 (online doi: 10.1177/0731684413497112).
  7. E. Rismani, Reuben Yeo, S. K. Sinha, H. Yang and C. S. Bhatia, Developing an (Al, Ti) Nx Cy interlayer to improve the durability of the ta-C coating on magnetic recording heads, Tribology Letters, 50(2) (2013) 233 – 243.
  8. Prabakaran Saravanan, N. Satyanarayana and S. K. Sinha, Wear Durability Study on Self-lubricating SU-8 composites with perfluoropolyther, multiply-alkylated cyclopentane and base oil as the fillers, Tribology International, 64 (2013) 103-115.
  9. Edward Ng. and S. K. Sinha, effects of antiwear additives in the base oil on the tribological performance of Hydrogen-free DLC Coating, Industrial Lubrication and Tribology (accepted).
  10. Leong Y. Jonathan, N. Satyanarayana and S. K. Sinha, A tribological study of Multiply-Alkylated Cyclopentanes and Perfluoropolyether lubricants for application to Si-MEMS devices, Tribology Letters, 50(2) (2013) 195-206.
  11. Yemei Liu and S. K. Sinha, Wear performances and wear mechanism study of bulk UHMWPE composites with nacre and CNT fillers and PFPE overcoat, WEAR, 300 (1-2) (2013) 44-54.
  12. Kia Hian Lau, Archit Giridhar, Sekar Harikrishnan, Nalam Satyanarayana and Sujeet K. Sinha, Releasing high as-pect ratio SU-8 microstructures using AZ photoresist as a sacrificial layer on metallized Si substrates, Microsystem Technologies, 19(11) (2013) 1863-1871.
  13. Xiaosong Tang, Yee Loke, Pin Lu, S. K. Sinha, and S. O'Shea, Friction measurement on free standing plates using atomic force microscopy, Review of Scientific Instruments, 84 (2013) 013702-1 – 013702-9.
  14. Sandar Myo Myint, Myo Minn, Ren Yaping, N. Satyanarayana, S. K. Sinha, Charanjit S. Bhatia, Friction and wear durability studies on the 3D negative fingerprint and honeycomb textured SU-8 surfaces, Tribology International, 60 (2013) 187-197.
  15. L. Dai, N. Satyanarayana, S. K. Sinha and V. B. C. Tan, Analysis of PFPE lubricating film in NEMS application via molecular dynamics simulation, Tribology International, 60 (2013)
  16. V. K. Jain, A. S. Chauhan, A. Thakur, A. Sidpara (2013), Fabrications of micro tools and micro patterns by electro chemical micromachining and some investigation into over potential, Int. Journal of Advanced Manufacturing Systems, Vol. 12, No. 2, 85–106.
  17. P. K. Basera and V. K. Jain (2013), Reducing Downtime of Repairing for Taper Roller Bearing by Magnetic Abrasive Finishing (MAF) process, Int. J. Innovation, Management and Technology, Vol. 4, No. 1, pp. 130-136.
  18. Ajay Sidpara, V. K. Jain (2013), Analysis of forces on the freeform surface in magnetorheological fluid based fin-ishing process, International Journal of Machine Tools and Manufacture, International Journal of Machine Tools & Manufacture 69 (2013) 1–10; DOI:10.1016/j.ijmachtool.2013.02.004, Vol. 69, pp. 1-10.
  19. C. S. Sathua, V. K. Jain*, J. Ramkumar, A. Sidpara (2013), Analysis of forces and surface roughness of magnetic abrasive finishing with a ball-end tool, Int. J. Precision Technology, Vol. 3, No. 2, 131-142.
  20. Satish Chinchanikar, S. K. Choudhury, "Investigations on machinability aspects of hardened AISI 4340 steel at diferent levels of hardness using coated carbide Tools" International Journal of Refractory Metals and Hard Materials, Vol. 38, pp.124-133, 2013.
  21. Satish Chinchanikar, S. K. Choudhury and A. P. Kulkarni, "Investigation of chip-tool interface temperature during turning of hardened AISI 4340 alloy steel using multi-layer coated carbide inserts" Advanced Materials Research Vol. 701 (2013) pp 354-358
  22. Satish Chinchanikar, S. K. Choudhury, "Wear behaviors of single-layer and multi-layer coated carbide inserts in high speed machining of hardened AISI 4340 steel" Journal of Mechanical Science and Technology, Vol. 27(5), pp. 1451-1459, 2013.
  23. A. Kumar, M. Zaloznik, H. Combeau, B. Goyeau and D. Gobin, A numerical simulation of columnar solidification: influence of the inertia on channel segregation, Modelling Simul. Mater. Sci. Eng., 21, 2013, 045016 (16pp).
  24. R. K. Shukla and A. Kumar, Formation of coating layers in low and high velocity molten hollow particles impact in thermal spray coating deposition process, Int. J. of Manufacturing Technology and Management,27(1/2/3), 2013,pp.74 –87.
  25. Khetan A., Das M. K., Muralidhar K., "Analysis of Methane Production from a Porous Reservoir via Simultaneous Depressurization and CO2 Sequestration", Special Topics and Reviews in Porous Media, Vol 4 (3), 2013, 237-252
  26. Kosti S., Das M. K., Saha A. K., "Buoyancy-driven Flow and Heat Transfer in a Nanofluid-filled Square Enclosure", Nanomaterials and Energy, 2(4), 2013, 200-211.
  27. Nath, D., Majumdar, R., Kalra, M. S., Thermonuclear fusion reactivities for drifting tri-Maxwellian ion velocity distri-butions (2013) Journal of Fusion Energy, 32 (4), pp. 457-463.
  28. Nath, D., Kalra, M. S., A comparative study of some spatial-temporal discretization schemes for nonlinear magnetohy-drodynamic simulation of plasmas (2013) Canadian Nuclear Society –34th Annual Conference of the Canadian Nuclear Society, Toronto, Canada.
  29. I. Chakraborty, G. Biswas, P. S. Ghoshdastidar, "A Coupled Level-Set and Volume-of-Fluid Method for the Buoyant Rise of Gas Bubbles in Liquids", International Journal of Heat and Mass Transfer, Vol. 58, pp. 240-259, 2013.
  30. Saha, A. K., "Unsteady Flow Past a Finite Square Cylinder Mounted on a Wall at Low Reynolds Number" Computers and Fluids, Vol. 88 (15), pp. 599-615, 2013.
  31. Gohil, T. B., Saha, A. K., Muralidhar, K., "Direct Numerical Simulation of Forced Circular Jets: effect of Varicose Perturbation ", Int. J. Heat Fluid Flow, Vol. 44, pp. 524-541, 2013.
  32. Kosti S., Das M. K., Saha A. K., "Buoyancy-driven Flow and Heat Transfer in a Nanofluid-Filled Square Enclo-sure", Nanomaterials and Energy, Vol. 2 (4), pp. 200-211, 2013.
  33. Ramgadia, A. G., Saha, A. K., "Three-Dimensional Numerical Study of Turbulent Flow and Heat Transfer In A Wavy-Walled Duct", Vol. 67, pp. 98-117, Int J. Heat Mass Transfer, 2013.
  34. Saha, A. K.,"Direct Numerical Simulation of Two-Dimensional Flow Past a Normal Flat Plate", ASCE J. of Engineering Mechanics, Vol. 139 (12), pp. 1894-1901, 2013.
  35. Ramgadia, A. G., Saha, A. K., "Numerical Study of Fully Developed Flow and Heat Transfer in a Wavy Passage", Int J. Thermal Sciences, Vol. 67, pp. 152-166, 2013.
  36. Sikarwar B. S., Muralidhar K. and Khandekar S., effect of drop shape on heat transfer during dropwise condensation underneath inclined surfaces, Interfacial Phenomena and Heat Transfer, Vol. 1, Issue 4, pp. 339-356, 2013.
  37. Moharana M. K. and Khandekar S., effect of Aspect Ratio of Rectangular Microchannels on the Axial Back-Conduction in its Solid Substrate, International Journal of Microscale and Nanoscale Thermal and Fluid Transport Phenomena, Vol. 4, Issue 3/4, 2013.
  38. Sikarwar B. S., Khandekar S. and Muralidhar K., Mathematical Modeling of Dropwise Condensation on Textured Surfaces, Sadhana-Academy Proceedings in Engineering Sciences, Vol. 38, Issue 6, pp. 1135-1171, 2013.
  39. Rao M., Lefevre F., Khandekar S. and Bonjour J., Understanding Transport Mechanism of a Self-sustained Thermally Driven Oscillating Two-phase System in a Capillary Tube, International Journal of Heat and Mass Transfer, Vol. 65, pp. 451-459, 21013.
  40. Bhutani G., Muralidhar K. and Khandekar S., Determination of Apparent Contact Angle and Shape of a Static Pendant Drop on a Physically Textured Inclined Surface, Interfacial Phenomena and Heat Transfer, Vol. 1, pp. 29-49, 2013.
  41. Singh S. K., Khandekar S., Pratap D. and Ramakrishna S. A., Wetting Dynamics and Evaporation of Sessile Droplets on Nano-porous Alumina Surfaces, Colloids and Surfaces - A: Physicochemical and Engineering Aspects, Vol. 432, pp. 71-81, 2013.
  42. Moharana M. K. and Khandekar S., Generalized formulation for estimating pressure drop in fully-developed laminar flow in singly and doubly connected channels of non-circular cross-sections, Computer Methods in Applied Mechanics and Engineering, Vol. 259, pp. 64-76, 2013.
  43. Majumder A., Mehta B. and Khandekar S., Local Nusselt Number Enhancement during Gas-liquid Taylor Bubble Flow in a Square Mini-channel: An Experimental Study, International Journal of Thermal Sciences, Vol. 66, pp. 8-18, 2013.
  44. Sikarwar B. S., Khandekar S. and Muralidhar K., Simulation of Flow and Heat Transfer in a Liquid Drop Sliding underneath a Hydrophobic Surface, International Journal of Heat and Mass Transfer, Vol. 57 (2), pp. 786-811, 2013.
  45. Abhinav Parashar, Rahul Singh, and P. K. Panigrahi, K. Muralidhar, "Chaotic Flow in an Aortic Aneurysm", Journal of Applied Physics, 113, 214909 (1-14) (2013).
  46. Nigam A. and Panigrahi P. K., "Increase in effectiveness of holographic particle field reconstruction using superposition procedure", APPLIED OPTICS, 52, No. 1, A1-A12 (2013).
  47. A.S. Gupta, R. Gupta, P. K. Panigrahi, K. Muralidhar, "Imaging transport phenomena during lysozyme protein crystal growth by the hanging drop technique", JOURNAL OF CRYSTAL GROWTH, 372, pp 19-33 (2013)
  48. R. K. Singh, R. Kant, S.S. Pandey, M. Asfer, B. Bhattacharya, P. K. Panigrahi, S. Bhattacharya, "Passive vibration damping using polymer pads with microchannel arrays", IEEE JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 99, pp 1-13 (2013).
  49. R. K. Maurya, A. K. Agarwal, "Particulate Morphology and Toxicity of an Alcohol Fuelled HCCI Engine" accepted for publication in SAE Journal of Fuels and Lubricants, October 2013.
  50. A. K. Agarwal, Himanshu Karare, Atul Dhar, "Particulate Characterization of a Methanol-Gasoline Blend (Gasohol) Fuelled Medium Duty Spark Ignition Transportation Engine", accepted for publication in Fuel Processing Technology, July 2013.
  51. Atul Dhar, A. K. Agarwal, "Experimental Investigation of effect of Karanja Biodiesel Blend on Tribological Properties of Lubricating Oil in a CI Engine". accepted for publication in FUEL, December 2013.
  52. Paras Gupta, Atul Dhar, A. K. Agarwal, "Experimental Investigations of a Single Cylinder Genset Engine with Common Rail Fuel Injection System" accepted for publication in Thermal Science: International Scientific Journal, June 2013.
  53. Pravesh Chandra Shukla, Tarun Gupta, A. K. Agarwal, "A Comparative Morphological Study of Primary and Secondary Particles Emitted from a Biodiesel (B20) vis-à-vis Diesel Fuelled CRDI Engine" accepted for publication in Aerosol and Air Quality Research, July 2013.
  54. Anirudh Gautam, A. K. Agarwal, "Determination of Important Biodiesel Properties Based on Fuel Temperature Cor-relations for Application in a Locomotive Engine", accepted for publication in FUEL, September 2013.
  55. R. K. Maurya, A. K. Agarwal, "Particulate Morphology and Toxicity of an Alcohol Fuelled HCCI Engine" accepted for publication in SAE Journal of Fuels and Lubricants 2013.
  56. R. K. Maurya, A. K. Agarwal, "Methanol Utilization in HCCI Engine and Statistical Analysis of Cyclic combustion Variations", accepted for publication in Applied Energy, March 2013.
  57. A. K. Agarwal*, Tarun Gupta, Neelabh Dixit, Pravesh Chandra Shukla, "Assessment of Toxic Potential of Primary and Secondary Particulates/ Aerosols from Biodiesel Vis-à-Vis Mineral Diesel Fuelled Engine" accepted for publication in Inhalation Toxicology, March, 2013.
  58. A. K. Agarwal, Atul Dhar, Dhananjay Srivastava, R. K. Maurya, Akhilendra Pratap Singh, "effect of Fuel Injection Pressure on Diesel Particulate Size and Number Distribution in a CRDI Single Cylinder Research Engine", accepted for publication in Fuel, January 2013.
  59. A. K. Agarwal, D. K. Srivastava, Atul Dhar, R. K. Maurya, Pravesh Chandra Shukla, Akhilendra Pratap Singh, "effect of Fuel Injection Timing and Pressure on Combustion, Emissions and Performance Characteristics of a Single Cylinder Diesel Engine", accepted for publication in Fuel, January 2013.
  60. Anirudh Gautam, A. K. Agarwal, "Experimental Investigations of Comparative Performance, Emission and Combustion Characteristics of Cottonseed Biodiesel Fuelled Four-Stroke Locomotive Diesel Engine", International Journal of Engine Research, Proceedings of IMechE, August 2013, vol. 14, Issue 4: pp. 354-372.
  61. R. K. Maurya, Dev Datt Pal, A. K. Agarwal, "Digital Signal Processing of Cylinder Pressure Data for Combustion Diagnostics of HCCI Engine", Mechanical Systems Signal Processing, Volume 36, Issue 1, March 2013, pp 95-109.
  62. R. K. Maurya, A. K. Agarwal, "Experimental investigation of cyclic variations in HCCI combustion parameters for gasoline like fuels using statistical methods", Applied Energy, Vol. 111, pp. 310-323, 2013.
  63. A. K. Agarwal, Vipul Chaudhury, Anuj Agarwal, Pravesh Chandra Shukla, "Comparative Study of Macroscopic Spray Parameters and Fuel Atomization Behaviour of Straight Vegetable Oils (Jatropha), its Biodiesel and Blends", Thermal Science International Scientific Journal. Vol. 17, No. 1 (2013), pp 217-32.
  64. A. K. Agarwal, Jithin Lukose, Akhilendra Pratap Singh, Tarun Gupta, "Characterization of Exhaust Particulates from Diesel Fuelled Homogenous Charge Compression Ignition Combustion Engine", Journal of Aerosol Science, 58, (April 2013), pp 71-85.
  65. A. K. Agarwal, Atul Dhar, "Experimental investigations of performance, emission and combustion characteristics of Karanja oil blends fuelled DICI engine", Renewable Energy, 52, 2013, pp 283-291.
  66. R. K. Maurya, A. K. Agarwal, "Investigations on the effect of measurement errors on estimated combustion and perfor-mance parameters in HCCI combustion engine", Measurement, Volume 46, Issue 1, January 2013, Pages 80-88.
  67. S. S. Bhandari, K. Muralidhar, and Y. M. Joshi, Enhanced thermal transport through a soft glassy nanodisc paste, Physical Review E, Vol. 87, pp. 022301(1-6) 2013.
  68. Trushar Gohil, A. K. Saha, and K. Muralidhar, Direct numerical simulation of forced circular jets: effect of varicose perturbation, International Journal of Heat and Fluid Flow, Vol. 44, pp. 524-541 (2013).
  69. B. S. Sikarwar, K. Muralidhar, and S. Khandekar, effect of drop shape on heat transfer during dropwise condensation underneath inclined surfaces, Interfacial Phenomena and Heat transfer, Vol. 1(4), pp. 339-356 (2013).
  70. S. S. Bhandari, K. Muralidhar, and Y. M. Joshi, Thermal diffusivity and viscosity of suspensions of disc shaped particles, Industrial and Engineering Chemistry Research, Vol. 52, 15114-15123, (2013).
  71. Abhishek Khetan, Malay K. Das, and K. Muralidhar, Analysis of Methane Production from a Porous Reservoir via Simultaneous Depressurization and CO2 Sequestration, accepted for publication in Special Topics and Reviews in Porous Media, Vol. 4(3), pp. 237-252 (2013).
  72. Abhinav Parashar, Rahul Singh, P. K. Panigrahi, and K. Muralidhar, Chaotic flow in an aortic aneurysm, Journal of Applied Physics, Vol. 113, pp. 214909 (1-14), (2013).
  73. Anamika S. Gupta, Rajive Gupta, P.K. Panigrahi, and K. Muralidhar, Imaging transport phenomena during lysozyme protein crystal growth by the hanging drop technique, Journal of Crystal Growth, Vol. 372, pp. 19-33 (2013).
  74. Basant S. Sikarwar, S. Khandekar, and K. Muralidhar, Simulation of flow and heat transfer in a drop sliding underneath a hydrophobic surface, International Journal of Heat and Mass Transfer, Vol. 57, pp. 786-811, (2013).
  75. Basant S. Sikarwar, S. Khandekar, and K. Muralidhar, Mathematical Modeling of Dropwise Condensation on Textured Surfaces, Sadhana (Springer), special issue on multi-phase flow and phase change phenomena, Vol. 38(6), pp. 1-37, 2013.
  76. S. Mahesh and M. D. Mathew. Modeling the effect of grain boundary sliding on creep lifetime: application to two austenitic stainless steels. Proceedia Engineering, 2013. 55:747-750.
  77. M. Arul Kumar and S. Mahesh. Subdivision and microtexture development in f.c.c. grains during plane strain com-pression. International Journal of Plasticity, 2013. 44:95-110.
  78. *Subramanian, P., Sujith, R. I., and Wahi, P., 2013, "Subcritical bifurcation and bistability in thermoacoustic systems", Journal of Fluid Mechanics, 715, pp. 210-238.
  79. Shukla, A., Singla, E., Wahi, P., and Dasgupta, B., 2013, "A direct variational method for planning monotonically optimal paths for redundant manipulators in constrained workspaces", Robotics and Autonomous Systems, 61(2), pp. 209-220.
  80. A study on the deviations of the jet with traverse speeds on different materials during pocket milling using Abrasive Water Jet Machining process, International Journal of Mechanics and Materials, Vol. 372 (2013) pp. 402-405, T. V. K. Gupta, J Ramkumar, Puneet Tandon, N. S. Vyas.
  81. Role of Process Parameters on Pocket Milling with Abrasive Water Jet Machining Technique, International Journal of Mechanical Science and Engineering Vol:7, No:10, 2013, T. V. K. Gupta, J. Ramkumar, Puneet Tandon, N. S. Vyas.
  82. Role of process parameters on pocket milling with Abrasive Water Jet Machining technique, International Conference on Aerospace, Mechanical, Automotive and Materials Engineering, ICAMAME 2013, Oct.22-23, 2013, Dubai, UAE. Published in Word Academy of Science, Engineering and Technology, Issue 82, October, 2013, pp.1374-1379, T. V. K. Gupta, J Ramkumar, Puneet Tandon, N. S. Vyas.
  83. Influence of operating parameters on the dimensional accuracy of channels prepared on SS304 using AWJM, ASME 2013 International Mechanical Engineering Congress & Exposition, ASME- IMECE 2013, USA, (Accepted for publication and presentation, Paper No. ASME-IMECE-64063), T. V. K. Gupta, J Ramkuar, Puneet Tandon, Nalinaksh S. Vyas.
  84. S. L. Das, T. Mandal and S. S. Gupta, 2013, Inextensional vibration of zig-zag single walled carbon nanotubes using nonlocal elasticity theories, International Journal of Solids and Structures, Vol. 50, 2792-2797.
  85. Sharma, I. 2013. Structural stability of rubble-pile asteroids.Icarus223, 367-382..
  86. R. R. Patel, Nandini Gupta, Sumit Basu, 2013, A quantitative method for characterising dispersion in Nanocomposites. Accepted in Journal of Nanostructured Polymers and Nanocomposites.
  87. Jatin, Sudarkodi V., Sumit Basu, 2013, Investigations into the origins of plastic flow and strain hardening in amorphous glassy polymers. International Journal of Plasticity.Article in Press.http://dx.doi.org/10.1016/j.ijplas.2013.11.007
  88. Brunda Kattekola, Chaitanya K. Desai, Parameshwaran Venkitanarayanan, Sumit Basu 2013 Critical Evaluation of a Constitutive Model for Glassy PolycarbonateExperimental Mechanics. Article in Press. doi: http://dx.doi.org/10.1007/s11340-013-9810-x
  89. Brunda Kattekola, Abhishek Ranjan, Sumit Basu 2013 Three dimensional finite element investigations into the effects of thickness and notch radius on the fracture toughness of polycarbonate. International Journal of Fracture, v181 (1), pp. 1-12.
  90. Design of a Vibration Isolation System using Eddy Current Damper Proceedings of the Institution of Mechanical Engi-neers, Part C: Journal of Mechanical Engineering Science, first published on May 10, 2013 as doi:10.1177/0954406213489408, Partha Paul, Chetan Ingale, and Bishakh Bhattacharya
  91. PZT-PDMS Composite for Active Damping of Vibrations, Composites Science and Technology, Vol 77, pp 42-51, 2013 ; Satinder K. Sharma, Himani Gaur, Manish Kulkarni, Ganesh Patil, Bishakh Bhattacharya and Ashutosh Sharma
  92. Passive vibration damping using polymer pads with micro-channel arrays, IEEE/ASME Journal of Microelectromechan-ical Systems, JMEMS , Vol. 22, NO. 3, pp 695-707, 2013, Rajeev Kumar Singh, Arnab Ghosh, Rishi kant, Mohammad Asfer, Bishakh Bhattacharya, Pradipta K. Panigrahi and Shantanu Bhattacharya.
  93. Aquatic Multi-Robot System for Lake Cleaning, Pranay Agarwal and Bishakh Bhattacharya, CLAWAR-2013.
  94. Active Shape Control of Parabolic Antenna Systems Using Shape Memory Alloy (SMA), Praveen Kumar D. B. S. Munjal and Bishakh Bhattacharya, ICIUS – 2013.
  95. Development of a Coupled Thermo-Electro Mechanical and Temporal Model of SMA Wire Using A Hybrid Approach, Parth P. Paul and Bishakh Bhattacharya, ICIUS-2013
  96. Vijay singh Shinde, Ashish Dutta and Anupam Saxena. "Experiments on multi-agent capture of a stochastically moving object using modified projective path planning", Robotica, vol. 31, no. 2, 2013, pp. 267-284.
  97. R. K. Jain, S. Majumder and Ashish Dutta. "SCARA Based Peg-in-hole Assembly Using Compliant IPMC Micro Gripper". Robotics and Autonomous Systems,Vol. 61, 2013, pp. 297-311.
  98. M. Felix Orlando, Ashish Dutta, AnupamSaxena, Laxmidhar Behera, Tomoya Tamei, Tomohiro Shibata. "Manipulability Analysis of Human Thumb, Index and Middle Finger in Cooperative 3D Rotational Movements of a Small Object", Robotica, vol. 31, 2013, pp. 797-809.
  99. "Scaling behavior and nearly constant loss effect in AgI-LiPO3 composite glasses" Devendra P. Singh, K. Shahi and Kamal K. Kar Solid State Ionics, ISSN: 0167-2738, Vol.: 231, pp.: 102-108, Year: 2013, Elsevier B.V.
  100. Saxena, A., 2013, "Contact-Aided Compliant Displacement-Delimited Gripper Manipulators," ASME Journal of Mech-anisms and Robotics, accepted.
  101. M. Felix Orlando, Ashish Dutta, Anupam Saxena, Laxmidhar Behera, Tomohiro Shibata, 2013, "Manipulability Analysis of Human Thumb, Index and Middle fingers in Cooperative 3D Rotational Movements," Robotica, accepted. Available on CJO. doi: 10.1017/S0263574713000064.
  102. Shinde, V. R, Dutta, A., Saxena, A., 2013, "Experiments on multi-agent capture of a moving object using projective path planning," Robotica, 31(2),pp. 267-284.
  103. A. Chatterjee. Better rank assignment in multiple-choice entrance exams. Current Science 105(2), 2013, 193-200.
  104. S. Das and A. Chatterjee. Numerical stability analysis of linear incommensurate fractional order systems. ASME Journal of Computational and Nonlinear Dynamics 8(4), 2013, 041012:1-6. S. Das was a dual degree student in IIT Kharagpur and is now a PhD student at the University of Michigan.
  105. P. Jana and A. Chatterjee. Modal damping in vibrating objects via dissipation from dispersed frictional microcracks. Proceedings of the Royal Society of London A, 469(2152), 2013, Article number 20120685. P. Jana was a PhD student in IIT Kharagpur and is now a teaching fellow in IIT Mandi.
  106. A. Bhattacharjee and A. Chatterjee. Dissipation in the Bouc-Wen model: small amplitude, large amplitude and two-frequency forcing. Journal of Sound and Vibration 332(7), 2013, 1807-1819. A. Bhattacharjee was an MS student in IIT Kharagpur and is now a PhD student at IIT Kanpur. This work was based on his MS thesis.
  107. S. Das and A. Chatterjee. Simple recipe for accurate solution of fractional order equations. ASME Journal of Com-putational and Nonlinear Dynamics 8(3), 2013, 031007:1-7. S. Das was a dual degree student in IIT Kharagpur and is now a PhD student at the University of Michigan.
  108. Dasgupta, Bhaskar; Divya, Kotha; Mehta, Vivek Kumar; and Deb, K.; "RePAMO: Recursive Perturbation Approach for Multimodal Optimization", ENGINEERING OPTIMIZATION Volume: 45 Issue: 9 Pages: 1073-1090 (2013).
  109. Shukla, Ashwini; Singla, Ekta; Wahi, Pankaj; and Dasgupta, Bhaskar, A Direct Variational Method for Planning Monotonically Optimal Paths for Redundant Manipulators in Constrained Environments Robotics and Autonomous Systems, Vol. 61, Issue 2; pages 209-220 (2013).
  110. B. Ray, G. Biswas, A. Sharma, and S. W. J. Welch, CLSVOF method to study consecutive drop impact on liquid pool, International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 23, pp. 143 - 158, (2013).
  111. A. Sinha, K. A. Raman, H. Chattopadhyay and G. Biswas, effects of different orientations of winglet arrays on the performance of plate-fin heat exchangers, International Journal of Heat and Mass Transfer, Vol. 57, pp. 202–214, (2013).
  112. I. Chakraborty, G. Biswas and P. S. Ghoshdastidar, A coupled level-set and volume-of-fluid method for the buoyant rise of gas bubbles in liquids, International Journal of Heat and Mass Transfer, Vol. 58, pp. 240–259, (2013).
  113. S. P. Singh, G. Biswas and P. Nithiarasu, A numerical study of vortex shedding from a circular cylinder vibrating in the in-line direction, International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 23, pp. 1449 - 1462, (2013)
  114. S. P. Singh and G. Biswas, Vortex induced vibrations of a square cylinder at subcritical Reynolds numbers, Journal of Fluids and Structures, Vol. 41, pp. 146-155, (2013)
  115. B. Ray, D. Bandyopadhyay, A. Sharma, S. W. Joo, S. Qian and G. Biswas, Long-wave interfacial instabilities in a thin electrolyte film undergoing coupled electrokinetic flows: a nonlinear analysis, Microfluidics and Nanofluidics, Vol. 15, pp. 19-33, (2013).
2012
  1. Rishi Kant, Himanshu Singh, Monalisha Nayak, Shantanu Bhattacharya, "Optimization of design and characterization of a novel micro-pumping system with peristaltic motion", Microsystems Technologies, 2012, DOI: 10.1007/s00542-12-1658-y.
  2. Rajeev Kumar Singh, Rishi kant, Mohammad Asfer, Bishakh Bhattacharya, Pradipta K. Panigrahi & Shantanu Bhattacharya , "Passive vibration damping using polymer pads with micro-channel arrays", Journal of Microelectromechanical Systems, 2012, DOI: 10.1109/JMEMS.2013.2241392.
  3. Ehsan Rismani, M. Abdul Samad, Sujeet K. Sinha, Reuben Yeo, Hyunsoo Yang, and C. Singh Bhatia, Ultrathin Si/C graded layer to improve tribological properties of Co magnetic films, Applied Physics Letters, 101 (2012) 191601-191601-5.
  4. Myo Minn and S. K. Sinha, The lubrication of poly (etheretherketone) by an aqueous solution of nattokinase, WEAR, 296 (1-2) (2012) 528-535.
  5. Keldren X. Z. Loy and S. K. Sinha, Lubrication of Polyether Ether Ketone (PEEK) surface by liquid ultrathin films for high wear durability, WEAR, 296 (1-2) (2012) 681-692.
  6. B. Panjwani and S. K. Sinha, Tribology and hydrophobicity of a biocompatible GPTMS/PFPE coating on Ti6Al4V surfaces, J. of the Mechanical Behavior of Biomedical Materials, 15 (2012) 103-111.
  7. E. Rismani-Yazdi, S. K. Sinha, H. Yang, S. Tripathy, and C. S. Bhatia, Development of a ta-C wear resistant coating with composite interlayer for recording heads of magnetic tape drives, Tribology letters, 46(3) (2012), 221-232.
  8. E. Rismani-Yazdi, S. K. Sinha, S Tripathy, H. Yang and C. S. Bhatia, effect of pre-treatment of Si interlayer by energetic C+ ions on the tribo-mechanical properties of amorphous carbon/head substrate, Journal of Applied Physics 111(2012), 084902-1 - 10.
  9. H. Yu, G. Zhou, S. K. Sinha and F. S. Chau, Development of self-aligning two-stage co-delivery microchannel network, Sensors and Actuators B: Chemical, Vol. 161, Issue 1 (2012) 769-774.
  10. Raju Gupta, B. Panjwani, N. Satyanarayana, S. K. Sinha and M. P. Srinivasan, Ultrathin PFPE film systems fabricated by covalent assembly: an application to tribology, Tribology Letters, 45(2) (2012) 371-378.
  11. Myo Minn, Nalam Satyanarayana, S. K. Sinha and Hirofumi Kondo, Microtribological study of PFPE with different functional groups coated on hydrogen terminated Si, Applied Surface Science 258 (2012) 2350– 2355.
  12. M. Abdul Samad, S. Xiong, L. Pan, H. Yang, S. K. Sinha, D. B. Bogy and C. S. Bhatia, A novel approach of carbon embedding in magnetic media for future head/disk interface, IEEE Transactions on Magnetics 48, (2012) 1807 -1812.
  13. R. A. Singh, N. Satyanarayana and S. K. Sinha, Bio-inspired advanced materials for reducing friction and wear in MEMS devices, Advanced Materials Research, 545 (2012) 359-363.
  14. Ajay Sidpara, V. K. Jain (2012), "Nanofinishing of free form surfaces of prosthetic knee joint implant", Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. Volume 226 (11), Pages 1833-1846.
  15. M. Ravi Sankar, V. K. Jain, J. Ramkumar (2012), "effect of Abrasive Medium ingredients on finishing of Al alloy and Al alloy/SiC Metal Matrix Composites using Rotational Abrasive Flow Finishing". Applied Mechanics and Materials, Volume 110-116, Pages 1328-1335.
  16. Ajay Sidpara, V. K. Jain (2012), "Nano level finishing of single crystal silicon blank using MRF process", Tribology International. Volume 47, Pages 159–166.
  17. Ajay Sidpara, V. K. Jain (2012), "Theoretical analysis of forces in magnetorheological fluid based finishing process", International Journal of Mechanical Sciences. Volume 56(1), Pages 50–59.
  18. Ajay Sidpara, V. K. Jain (2012), "Experimental investigations into surface roughness and yield stress in magnetorhe-ological fluid based nano-finishing process International Journal of Precision Engineering and Manufacturing. Volume 13 (6), Pages 855–860.
  19. V. K. Jain, Subodh Kalia, Ajay Sidpara, V. N. Kulkarni (2012), "Fabrication of micro-features and micro- tools using electrochemical micromachining", International Journal of Advanced Manufacturing Technology. DOI 10.1007/s00170-012-4088-1, Vol. 61(9-12), pp. 1175-1183.
  20. Ravi Sankar, M., Jain, V. K., Ramkumar, J. (2012), effect of abrasive medium ingradients on finishing of Al alloy and Al alloy/SiC metal matrix composites using rotational abrasive flow finishing, Applied Mechanics and Materials, Vol. 110-116, pp1328-1335.
  21. V. K. Jain, Ajay Sidpara, M. Ravi Sankar, Manas Das, Nanofinishing Techniques : A Review, Proceedings of the Insti-tution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, DOI: 10.1177/0954406211426948, Vol.226(2), pp. 327-346.
  22. Manas Das, V. K. Jain, P. S. Ghoshdastidar (2012), CFD simulation and experimental investigations into magnetic field assisted nano-finishing process, Proc IMechE B: J Engineering Manufacture, 226 (7) 1143–1158, 2012. DOI: 10.1177/0954405412440230.
  23. V. K. Jain, Vinod Kumar, M. Ravi Sankar(2012), "Experimental study and Empirical Modeling of Magnetic Abrasive Finishing on Ferromagnetic and Non- Ferromagnetic Materials" International Journal of Precision Technology, Vol. 3(1), pp.91-104 .
  24. M. Ravi Sankar, V. K. Jain, J. Ramkumar (2012), "Dependence of AFF process on Rheological Characteristics of Soft styrene based organic polymer abrasive medium", International Journal of Manufacturing Technology Research, 4(1-2), pp.89-104.
  25. Satish Chinchanikar, S. K. Choudhury, "effect of work material hardness and cutting parameters on performance of coated carbide tool when turning hardened steel: An optimization approach" Measurement (2012), www.dx.doi.org/10.1016/j.me
  26. Gaurav Bartarya, S. K. Choudhury, "effect of cutting parameters on cutting force and surface roughness during finish hard turning AISI52100 grade steel", Procedia CIRP 1 (2012) 674-679.
  27. G. Bartarya, S. K. Choudhury – "A regression model for force and surface roughness estimation during hard turning" Ad- vanced Materials Research, Vols. 299-300 (2011), pp. 1167-1170, Trans Tech Publisher, Switzerland, doi:10.4028/www.scientific.n 300.1167.
  28. Gaurav Bartarya, S.K.Choudhury - "A methodology to estimate the forces on the tool insert in finish hard turning", Int. J. of Machining and Machinability of Materials, Inderscience Publications Vol. 11, No. 3, pp.280-296, 2012.
  29. Trivedi, A. K., Srivastava, A., Lele, H. G., Kalra, M. S., Munshi, P., Uncertainty analysis of large break LOCA for pressurized heavy water reactor (2012) Nuclear Engineering and Design, 245, pp. 180-188.
  30. Koustubh Sinhal, P. S. Ghoshdastidar and Bhaskar Dasgupta, "Computer Simulation of Drying of Food Products with Superheated Steam in a Rotary Kiln", ASME Journal of Thermal Science and Engineering Applications, Vol.4, pp. 011009-1-13, 2012.
  31. Manas Das, Vijay K. Jain and Partha S. Ghoshdastidar, "Computational Fluid Dynamics Simulation and Experimental Investigations into the Magnetic Field-Assisted Nano-finishing Process", Proc. IMechE Part B, Journal of Engineering Manufacture, Vol. 226, No.7, pp.1143-1158, 2012.
  32. Manas Das, V. K. Jain, P. S. Ghoshdastidar, "Nanofinishing of Flat Workpieces using Rotational-Magnetorheological Abrasive Flow Finishing (R-MRAFF) Process", International Journal of Advanced Manufacturing Technology, Vol. 62, pp. 405-420, 2012.
  33. Gohil, T. B., Saha, A. K., Muralidhar, K., "Numerical Study of Instability Mechanisms in a Circular Jet at Low Reynolds Numbers", Computers and Fluids, Vol.64, pp. 1-18, 2012.
  34. Ramgadia, A. G., Saha, A. K., "Fully developed flow and heat transfer characteristics in a wavy passage: effect of amplitude of waviness and Reynolds number", Int J. Heat Mass Transfer, Vol. 55, pp. 2494-2509, 2012.
  35. Ramgadia, A. G., Saha, A. K., "Large Eddy Simulation of Turbulent Flow and Heat Transfer in a Ribbed Coolant Passage", Journal of Applied Mathematics, Article ID 246313, 2012 (21 pages).
  36. Saha, A. K., Malik, T. "Mixed Convective Flow and Heat Transfer through a Horizontal Channel With Surface Mounted Obstacles", Journal of Enhanced Heat Transfer, Vol. 19, Issue 4, pp. 313-329, 2012.
  37. Saha, A. K., Yaragani, C. B. "Three-Dimensional Numerical Study of Jet-in-Crossflow Characteristics at Low Reynolds Number", Heat & Mass Transfer, Vol. 48, pp. 391-411, 2012.
  38. Bajpai A. K. and Khandekar S., Thermal Transport Behavior of a Liquid Plug Moving Inside a Dry Capillary Tube, Heat Pipe Science and Technology-An International Journal, Vol. 3(2-4), pp. 97–124, 2012.
  39. Mehta B. and Khandekar S., Infra-red Thermography of Laminar Heat Transfer during early Thermal Development Inside a Square Mini-channel, Experimental Thermal and Fluid Science, Vol. 42, pp. 219-229, 2012.
  40. Moharana M. K., Singh P. K. and Khandekar S., Optimum Nusselt Number for Simultaneously Developing Internal Flow under Conjugate Conditions in a Square Microchannel, ASME Journal of Heat Transfer, Vol. 134, pp. 071703(1-10), 2012.
  41. Khandekar S., Mamila R., Agnihotri V. and Ramkumar J., Nano-Cutting Fluid for Enhancement of Metal Cutting Performance, Materials and Manufacturing Processes, Vol. 27, pp. 963-967, 2012.
  42. Sikarwar B. S., Khandekar S., Agrawal S., Kumar S. and Muralidhar K., Dropwise Condensation Studies on Multiple Scales, Heat Transfer Engineering, Special Issue: Advances in Heat Transfer, Vol. 33, Issue 4/5, pp. 301-341, 2012.
  43. Pankaj Saha, G. Biswas and S. Sarkar, 2012, "Shear improved smagorinsky model pertaining to large eddy simulation applied on liddriven cavity flows", International Journal of Advances in Engineering Sciences and Applied Mathematics 4(3):165–171.
  44. Pradhan, T., Asfer, M., and Panigrahi, P. K. "Droplet hydrodynamics during lysozyme protein crystallization", Physical Review E, 86, 051602 (2012).
  45. Srivastava, A., Muralidhar, K. and Panigrahi P. K. "Optical imaging and three dimensional reconstruction of the concentration field around a crystal growing from an aqueous solution: A review", Progress in Crystal Growth and Charac-terization of Materials, Vol. 58, Issue 4, pp. 209-278, (2012).
  46. Singh Dhananjay and Panigrahi P. K. "Automatic threshold technique for holographic particle field characterization", Applied Optics, Vol. 51, No. 17, pp. 3874-3887 (2012).
  47. Kaladhar, S., Panigrahi, P. K., and Munshi, P. "Color schlierendeflectometry study of jet mixing: effect of buoyancy and perforation", Heat and Mass Transfer, 48, pp. 541-554 (2012).
  48. A. K. Agarwal, Atul Dhar, "Wear, Durability and Lubricating Oil Performance of a Straight Vegetable Oil (Karanja) Blend Fuelled DICI Engine", Journal of Renewable and Sustainable Energy, 4, 063138 (2012) pp 1-13.
  49. A. K. Agarwal, Deepak Khurana "Long-Term Storage Oxidation Stability of Karanja Biodiesel with Use of Antioxidants", Fuel Processing Technology, 106, February 2012, pp 447-452.
  50. R. K. Maurya, A. K. Agarwal, "Experimental Investigations of Gasoline HCCI Engine during Startup and Transients", SAE 2011-01-2445, SAE International Journal of Engines, March 2012.
  51. Akhilendra Pratap Singh, A. K. Agarwal, "Combustion Characteristics of Diesel HCCI Engine: An Experimental Inves-tigation Using External Mixture Formation Technique", Applied Energy, Volume 99, November 2012, Pages 116-125.
  52. A. K. Agarwal, Vipul H. Chaudhury, "Spray Characteristics of Biodiesel/ Blends in a High Pressure Constant Volume Spray Chamber" accepted for publication in Experimental Thermal and Fluid Science, Volume 42, pp. 212–218, 2012.
  53. Atul Dhar, Roblet Kevin, A. K. Agarwal, "Production of Biodiesel from High-FFA Neem Oil and its Performance, Emission and Combustion Characterization in a Single Cylinder DICI Engine", Fuel Processing Technology, Volume 97, May 2012, Pages 118-129.
  54. Jitendra N. Gangwar, Tarun Gupta, A. K. Agarwal, "Composition and comparative toxicity of particulate matter emitted from diesel and biodiesel fueled CRDI engine", Atmospheric Environment, Volume 46, January 2012, pp 472-481.
  55. R. K. Maurya, A. K. Agarwal, "Statistical Analysis of the Cyclic Variation of Heat Release Parameters in HCCI Com-bustion of Methanol and Gasoline", Applied Energy, Volume 89, Issue 1, January 2012, Pages 228-236.
  56. Trushar Gohil, R. McGregor, D. Szczerba, K. Burckhardt, K. Muralidhar, and G. Szekely, Simulation of Oscillatory Flow in an Aortic Bifurcation using FVM and FEM: A Comparative Study, International Journal of Numerical Methods in Fluids, Vol. 66(8), pp. 1037-1067, (2012).
  57. Trushar Gohil, A. K. Saha, and K. Muralidhar, Numerical Study of Instability Mechanisms in a Circular Jet at Low Reynolds Numbers, Computers and Fluids, Vol. 64, pp. 1-18 (2012).
  58. Basant Singh Sikarwar, S. Khandekar, Smita Agrawal, Sumeet Kumar and K. Muralidhar, Dropwise Condensation Studies on Multiple Scales, special issue on Advances in Heat Transfer in Heat Transfer Engineering, pp. 301-341, Vol. 33(4-5) (2012).
  59. M. Arul Kumar and S. Mahesh. Banding in single crystals during plastic deformation. International Journal of Plasticity, 2012. 36:15-33.
  60. S. Mahesh. Orientation preferences of extended sub-granular dislocation boundaries. Philosophical magazine, 2012. 92(18):2286-2312.
  61. S. Mahesh. On the orientation of cell block boundaries in the grains of a rolled f.c.c. polycrystal. Materials science forum, 2012. 702-703:188-191.
  62. M. Arul Kumar, S. Mahesh and P. Venkitanarayanan. A rate-independent 'stack' model of a polycrystalline aggregate. Materials science forum, 2012. 702-703:192-195.
  63. Kabiraj, L., Sujith, R. I., and Wahi, P., 2012, "Route to chaos for combustion instability in ducted laminar premixed flames", Chaos, 22(2), 02312.
  64. Kabiraj, L., Sujith, R. I., and Wahi, P., 2012, "Investigating dynamics of combustion driven oscillations leading to lean blowout", Fluid Dynamics Research, 44(3), 031408.
  65. Paul, S., Verma, M. K., Wahi, P., Reddy, S., and Kumar, K., 2012, "Chaotic Dynamics in two-dimensional Rayleigh-Benard Convection", International Journal of Bifurcation and Chaos, 22(5), 1230018.
  66. Yadav, R., Verma, M. K., and Wahi, P., 2012, "Bistability and chaos in the Taylor-Green dynamo", Physical Review E, 85(3), 036301, doi:10.1103/PhysRevE.85.036301.
  67. Kabiraj, L., Sujith, R. I., and Wahi, P., 2012, "Bifurcations of self-excited ducted laminar premixed flames", ASME Journal of Engineering for Gas Turbines and Power, 134(3), 031502 (1-7).
  68. Saha, A., Pandey, S. S., Bhattacharya, B., and Wahi, P., 2012, "Analysis and control of friction-induced oscillations in a continuous system", Journal of Vibration and Control, 18(3), pp. 467-480.
  69. Structural Fault Detection Using Volterra Series and Multi-Tone Harmonic Probing, Nineth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies CM2012 / MFPT2012, London, UK, June 11-13, 2012, Nalinaksh S. Vyas and Sharad Dwivedi, 2012.
  70. Modelling for Ride Index and Derailment Criterion Calculation of Railway Passenger Coach under Track Irregularity Excitation, Proc. 24th International Congress on Condition Monitoring and Diagnostics Engineering Management (COMADEM), Huddersfield, UK, June 18 – 20, 2012, Nalinaksh S. Vyas and Manoj Nayani, 2012.
  71. Dynamic Analysis of Multi-body Vehicle fitted with controlled limited-Slip differential using MSC.ADAMS/Car', Inter-national Congress of Theoretical and Applied Mechanics (ICTAM), Beijing, Aug.19-24, 2012, Mohit Goel, Nalinaksh S.Vyas.
  72. Rollover and Lateral Sliding Stability of Three Wheeled Vehicles', International Congress of Theoretical and Applied Mechanics (ICTAM) 2012, Beijing, Aug.19-24, Tukesh Soni, Nalinaksh S.Vyas.
  73. A Preliminary Investigation on the forces generated with process parameters during Abrasive Water Jet Milling on SS304, International Conference on Innovations in Design and Manufacturing, PDPM IIITDM J, Dec.05-07, 2012 (Pap. No. 2032), T. V. K. Gupta, J. Ram Kumar, N. S. Vyas, P Tandon.
  74. Material removal rate prediction for blind pocket milling of SS304 using Abrasive Water Jet Machining Process, Hong Kong International Conference on Engineering and Applied Science Hong Kong, 14-16th Dec. 2012 (Pap. No. 411), T. V. K. Gupta, J. Ram Kumar, N. S. Vyas, P. Tandon.
  75. D. Sharma, S. S. Gupta and R. C. Batra, 2012, Mode localization in composite laminates, Composite Structures, (Accepted).
  76. Rizvi, Md., S. and Das, S. L.: Role of membrane addition in animal cell cytokinesis. Journal of Theoretical Biology 315, 139, 2012.
  77. Singh, P., Mahata, P., Baumgart, T., and Das, S. L.: Curvature sorting of proteins on a cylindrical lipid membrane tether connected to a reservoir. Physical Review E 85, 051906, 2012.
  78. Zhu, C., Das, S. L., and Baumgart, T.: Nonlinear sorting, curvature generation, and crowding of endophilin N-BAR on tubular membranes. Biophysical Journal 102, 1837, 2012.
  79. I. Sharma. 2012 Stability of rotating non-smooth complex fluids..J. Fluid Mechanics708, 71-991.
  80. Dalmeya R., I. Sharma, C. S. Upadhyay, A. Anand 2012. Contact of a rigid cylindrical punch with an adhesive elastic layer. J. Adhesion88, 1-31.
  81. Suman Guha, Sandeep Sangal, Sumit Basu 2012 Finite Element studies on indentation size effect using a higher order strain gradient theory. International Journal of Solids and Structures, v50 (6), pp. 863 – 875.
  82. Chaitanya K. Desai, Sumit Basu, P. Venkitnarayanan 2012 Determination of Complex Stress Intensity Factor for a Crack in a Bimaterial Interface using Digital Image Correlation Optics and Lasers in Engineering, v50 (10), pp.1423 – 1430.
  83. Ashok Singh, Animesh Das, Sumit Basu 2012 A numerical study on the effect of aggregate gradation on mechanical response of asphalt mix KSCE Journal of Civil Engineering, v16(4), pp.594-600.
  84. Prabhat K. Agnihotri, Kamal K. Kar and Sumit Basu 2012 Cohesive zone model of carbon nanotube-coated carbon fiber/polyester composites. Modelling and Simulation in Materials Science Engineering, v20 (3), pp 035014
  85. K. Mitra, Animesh Das and Sumit Basu 2012 Mechanical Behaviour of Asphalt Mix: An Experimental and Numerical Study Construction and Building Materials, v27(1), pp.545-552.
  86. Damage Detection of Bridge using Wireless Sensors, Proc. IFAC MMM-2012; K. Roy, H. Ogai, B. Bhattacharya, S. Roychoudhuri and J. Qin
  87. Constructive Solid Geometry based Topology Optimization using Evolutionary Algorithm, Proc. BI CTA-2012; F. Ahmed, B. Bhattacharya and K. Deb.
  88. Analysis and control of friction-induced oscillations in a continuous system, Journal of Vibration and Control, Vol. 18 No. 3 467-480, 2012; A. Saha, S. Pandey, B. Bhattacharya and P. Wahi
  89. R. K. Jain, S. Majumder and A. Dutta. "Multiple path generation by a flexible 4-bar mechanism using ionic polymer metal composite". Journal of Intelligent Material Systems and Structures, Vol. 23, no. 12, 2012, pp. 1379-1393.
  90. R. K. Jain, S. Majumder and A. Dutta. "Micro assembly by an IPMC based flexible 4-bar mechanism". Smart Materials and Structures, vol. 21, no. 7, 2012.
  91. Bankar, UH, Parameswaran V, Fracture of Edge Cracked Layered Plates Subjected to In-plane Bending, EXPERIMETAL MECHANICS, DOI 10.1007/s11340-012-9649-6, JUL, 2012
  92. Chaitanya K. Desai, Sumit Basu, Parameswaran V., Determination of Complex Stress Tntensity Factor for a Crack in a Bimaterial Interface using Digital Image Correlation, OPTICS AND LASERS IN ENGINEERING, 50: 1423-30, JUN 2012.
  93. Cohesive zone model of carbon nanotube-coated carbon fiber/polyester composites"
  94. Prabhat Agnihotri,Kamal K. Kar , and Sumit Basu Modelling and Simulation in Materials Science and Engineering, ISSN:1361-651X, Vol.:20 (3), pp. 035014/1-035014/13, Year: 2012, Institute of Physics Publishing.
  95. Mechanical properties of functionally graded carbon black-styrene butadiene rubber composites: effect of modify-ing gradation and average filler loading" Sandeep Ahankar and Kamal K. Kar Journal of Applied Polymer Science, ISSN:0021-8995, Vol.:125(5), pp. 3469-3476, Year:2012, John Wiley & Sons, Inc
  96. Surface Finishing of Carbon-Carbon Composites Using Abrasive Flow Machining".
  97. N. L. Ravikumar, Kamal K. Kar, D. Sathiyamoorthy, Anil Kumar, and Rohini Devi Fullerenes, Nanotubes, and Carbon Nanostructures, ISSN:1536-383X, Vol. 20(2), pp.170-182, Year:2012, Taylor & Francis, Inc.
  98. 148. Functionalized poly (ether ether ketone): Improved mechanical property and acellular bioactivity" Sumit Pramanik and Kamal K. Kar Journal of Applied Polymer Science, ISSN: 0021-8995, Vol.123 (2), pp. 1100-1111, Year: 2012, John Wiley & Sons, Inc.
  99. Numerical simulation of ductile fracture in thin-walled tube impacted against a rigid surface, International Journal of Damage Mechanics, 21(3), 341-371, 2012 (with S. S. Gautam).
  100. Prediction of wrinkling and determination of minimum blankholding pressure in multistage deep drawing, Journal of Manufacturing Science and Engineering Transactions of the ASME, 133(6), 1104-1117, 2012, (with A. Agarwal and N. V. Reddy).
  101. Saxena, A., Valero-Cuevas, F., J., Lipson, H., 2012, "Functional inference of complex anatomical tendinous networks at a macroscopic scale via sparse experimentation," PLOS Computational Biology, 8(11): p.1-17
  102. Saxena A. and Sauer, R. A, 2012, "On combined Gradient-Stochastic Search for Topology Synthesis using the Material Mask Overlay Method," International Journal for Numerical Methods in Engineering, in press. DOI: 10.1002/nme.4401
  103. Reddy, B. V. S Nagendra, Sujitkumar V. Naik and Saxena, A., 2012, "Systematic Synthesis of Large Displacement Contact Aided Monolithic Compliant Mechanisms," ASME Journal of Mechanical Design, 134(1), pp.011007-1-12 46. (2012) Anurag Gupta and Xanthippi Markenscoff. A new interpretation of configurational forces. Journal of Elasticity, 108(2), pp. 225-228.
  104. (2012) Anurag Gupta and David Steigmann. Plastic flow in solids with interfaces. Mathematical Methods in the Applied Sciences, 35 (15), pp. 1799-1824.
  105. P. Jana and A. Chatterjee. Modal damping in vibrating objects via dissipation from dispersed frictional microcracks. Proceedings of the Royal Society of London A, 469(2152), 2013.
  106. A. Chatterjee and A. Chatterjee. Use of the Frechet distribution for UPV measurements in concrete. Nondestructive Testing and Evaluation International 52, 2012, 122128. Abhijit Chatterjee, is a scientist at CMERI (CSIR), Durgapur.
  107. Koustubh Sinhal, P. S. Ghoshdastidar and Bhaskar Dasgupta, Computer Simulation of Drying of Food Products With Superheated Steam in a Rotary Kiln", J. Thermal Sci. Eng. Appl. 4, 011009 (2012).
  108. Vivek Kumar Mehta and Bhaskar Dasgupta, "A constrained optimization algorithm based on the simplex search method", Engineering Optimization, Vol. 44 No. 5, 537-550 (2012).
  109. B. Ray, P. D. S. Reddy, D. Bandyopadhyay, S. W. Joo, A. Sharma, S. Qian and G. Biswas, Instabilities in Free-surface Electroosmotic Flows, Theor. Comput. Fluid Dyn., Vol. 26, pp. 311-318, (2012).
  110. B. Ray, G. Biswas and A. Sharma, Oblique Drop Impact on Deep and Shallow Liquid, Commun. Comput. Phys., Vol. 11, pp. 1386 – 1396, (2012).
  111. G. Biswas, H. Chattopadhyay and A. Sinha, Augmentation of Heat Transfer by Creation of Streamwise Longitudinal Vortices using Vortex Generators, Heat Transfer Engineering, Vol. 33, pp. 406 – 424, (2012).
  112. S. Sarkar, S. Ganguly and G. Biswas, Mixed Convective Heat Transfer of Nanofluids Past a Circular Cylinder in Cross Flow in Unsteady Regime, International Journal of Heat and Mass Transfer, Vol. 55, pp. 4783 – 4799, (2012)
  113. D. Chatterjee, G. Biswas and S. Amiroudine, Mixed Convection Heat Transfer from an In-line Row of Square Cylinders in Cross-Flow at Low Reynolds Number, Numerical Heat Transfer Part A, Vol. 61, pp. 891-911, (2012).
  114. A. Pal, D. Bandyopadhyay, G. Biswas and V. Eswaran, Enhancement of Heat Transfer Using Delta-Winglet Type Vortex Generators with a Common Flow Up Arrangement, Numerical Heat Transfer Part A, Vol. 61, pp. 912-928, (2012).
  115. B. Ray, G. Biswas and A. Sharma, Bubble pinch-off and scaling during liquid drop impact on liquid pool, Physics of Fluids, Vol. 24, pp. 082108-1 – 082108-11, (2012).
2011
  1. Arnab Ghosh, Tarak K. Patra, Rishi Kant, Rajeev Kr. Singh, Jayant K. Singh, Shantanu Bhattacharya, "Surfaces electrophoresis of ds-DNA across orthogonal pair of surfaces", Applied Physics Letters, Vol. 98, 1,1-4, 2011.
  2. Dai Ling, Myo Minn, N. Satyanarayana, S. K. Sinha and Vincent Tan, Identifying the mechanisms of polymer friction through molecular dynamics simulation, Langmuir, 27 (2011) 14861-14867.
  3. R. A. Singh, N. Satyanarayana and S. K. Sinha, Surface chemical modification for exceptional wear life of MEMS materials, AIP Advances,1, 042141 (2011).
  4. Abdul Samad M. and S. K. Sinha, Mechanical, thermal and tribological characterization of a UHMWPE film reinforced with carbon nanotubes coated on steel, Tribology International, Vol. 44, Issue 12 (2011) 1932-1941.
  5. Nam Beng Tay, M. Minn and S. K. Sinha, A tribological study of SU-8 micro-dot patterns printed on Si surface in flat-on-flat reciprocating sliding test, Tribology Letters, Vol 44 (2011) 167-176.
  6. R. A. Singh, L Siyuan, N. Satyanarayana, T. S. Kustandi and S. K. Sinha, Bio-inspired polymeric patterns with enhanced wear durability for microsystem applications, Materials Science and Engineering C, Vol. 31 (2011) 1577–1583.
  7. M. Abdul Samad, Yang Hyunsoo, S. K. Sinha and C. S. Bhatia, Eect of carbon embedding on the tribological properties of magnetic media surface with and without a perfluropolyether (PFPE) layer, J. Physics D: Appl. Phys., (2011) vol. 44, No. 31, 315301.
  8. M. Abdul Samad, E. Rismani, Yang Hyunsoo, S. K. Sinha and C. S. Bhatia, Overcoat free magnetic media for lower magnetic spacing and improved tribological properties for higher areal densities, Tribology Letters, Volume 43, Issue 3 (2011), Page 247-256.
  9. Yu Hongbin, Zhou Guangya, S. K. Sinha, Leong Yonghui Jonathan and Chau Fook Siong, Characterization and reduc-tion of MEMS sidewall friction using novel microtribometer localized lubrication method, J. of Microelectromechanical Systems, Vol. 20, Issue 4 (2011) 991-1000.
  10. H. Yu, G. Zhou, X. Chew, S. K. Sinha and F. S. Chau, Nano-tribometer integrated with a nano-photonic displacement-sensing mechanism, Journal of Micromechanics and Microengineering, Vol. 21 (2011) 065014.
  11. M. Abdul Samad and S. K. Sinha, effects of counterface material and UV radiation on the tribological performance of a UHMWPE/CNT nanocomposite coating on steel substrates, WEAR, 271 (2011) 2759-2765.
  12. Y. K. Yew, M. Myo, S. K. Sinha, V. B. C. Tan, Molecular simulation of the frictional behavior of polymer-on-polymer sliding, Langmuir, Vol. 27 (10) (2011) pp 5891–5898.
  13. Y. J. Man, B. Liu, S. B. Hu, Y. S. Ma, K. D. Ye, S. K. Sinha and S. C. Lim, Characterization of slider-lubricant interaction with tribo-current, Microsystem Technologies, Vol. 17, No. 5-7 (2011) 1003-1007.
  14. Hongbin Yu, Guangya Zhou, Fook Siong Chau and S. K. Sinha, Tunable electromagnetically-actuated liquid-filled lens, Sensors & Actuators A – Physical, Vol 167, Issue 2 (2011) 602-607.
  15. Hongbin Yu, Guangya Zhou, Fook Siong Chau and S. K. Sinha, Soft lithography replication based on PDMS partial curing, Microsystem Technologies, Volume 17, Number 3 (2011) 443-449.
  16. Nam Beng Tay, M. Minn and S. K. Sinha, Polymer jet printing of SU-8 micro-dot patterns on Si surface: Optimization of tribological properties, Tribology Letters, Vol 42 (2011) 215–222.
  17. B. Panjwani, N. Satyanarayana, S. K. Sinha, Tribological characterization of a biocompatible thin film of UHMWPE on Ti6Al4V and the effects of PFPE as top lubricating layer, J. of the Mechanical Behavior of Biomedical Materials, Vol. 4, Issue 4 (2011) 953-960.
  18. E. Rismani-Yazdi, S. K. Sinha, S. Tripathy, H. Yang and C. S. Bhatia, effect of pre-treatment of the surface by energetic C+ ion bombardment on structure and nano-tribological characteristics of ultrathin tetrahedral amorphous carbon (ta-C) protective coatings, Journal of Physics D: Applied Physics, Volume 44, Number 11 (2011) 115502.
  19. R. Arvind Singh, N. Satyanarayana, T. S. Kustandi and S. K. Sinha., Tribo-functionalizing Si and SU8 materials by surface modification for applications in MEMS/NEMS actuator-based devices, J. of Physics D: Applied Physics Vol. 44 (2011) 015301.
  20. M. Abdul Samad and S. K. Sinha, Dry and boundary lubrication performance of a UMWPE/CNTs nanocomposite coating on steel substrates at elevated temperatures, WEAR, 270 (2011) 395–402.
  21. Myo Minn, Yanadi S. G. Soentanto, S. K. Sinha, Tribology properties of ultra-thin functionalized polyethylene film chemisorbed on Si with an intermediate benzophenone layer, Tribology Letters, Vol. 41 (2011) 217–226.
  22. Manas Das, V. K. Jain, P. S. Ghoshdastidar (2011), Nanofinishing of flat workpieces using Rotational - Magnetorheological Abrasive Flow Finishing (R-MRAFF) using Rotational - Magnetorheological Abrasive Flow Finishing (R-MRAFF) Process, International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-011-3808-2.
  23. M. Ravi Sankar, V. K. Jain, J. Ramkumar, Y. M. Joshi (2011), "Rheological Characterization of Styrene-Butadiene based medium and its Finishing Performance using Rotational Abrasive Flow Finishing Process" International Journal of Machine tools and Manufacture, Volume 51, Issue-12, 2011, Pages 947-957.
  24. V. K. Jain, Subodh Kalia, A. M. Sidpara, (2011), Some aspects of fabrication of micro devices by electrochemical micro-machining (ECMM) and its finishing by magnetorheological fluid, Int. J. Advanced Mfg. Tech., (DOI) 10.1007/s00170-011-3563-4, Vol. 59(9), pp. 987-996.
  25. Ajay Sidpara, V. K. Jain, (2011), Experimental investigations into forces during magnetorheological fluid based finishing process, Int. J. Mach. Tools & Manufacture, Vol. 51, pp. 358-362.
  26. Anjali V. Kulkarni, Vijay Kumar Jain, and Krishna Avtar Misra, "Electrochemical Spark Micromachining: Present Scenario", Position paper, IJAT vol. 5, no. 1, pp. 52-59, 2011
  27. Kulkarni, A.V., Jain, V.K. and Misra, K. A. 'Electrochemical spark micromachining (microchannels and microholes) of metals and non-metals', Int. J. Manufacturing Technology and Management, Vol 22, no. 2, pp. 107-123, 2011.
  28. Manas Das, V. K. Jain, and P.S Ghoshdastidar (2011), Investigations into out-of-roundness of internal surfaces of stainless steel tubes finished by R-MRAFF Process, Journal of Materials and Manufacturing Processes Vol. 26, pp-1073-1084.
  29. Ajay Sidpara, V. K. Jain (2010), " effect of fluid composition on nanofinishing of single-crystal silicon by magnetic field-assisted finishing process", International Journal of Advanced Manufacturing Technology . (doi: 10.1007/s00170-010-3032-5), Vol.55, pp. 243-252.
  30. Kumar Sambhav, S. K. Choudhury, Abhishek Kumar – " Mechanistic Force Modeling of Single-Point Cutting Tool in terms of Grinding Angles" Accepted in International Journal of Machine Tool and Manufacture, IJMACTOOL-D-10-00679R2, 2011.
  31. G. Bartarya, S. K. Choudhury – "State of the Art in Hard Turning" International Journal of Machine Tools and Manu-facture (2011), doi: 10.1016/j.ijmachtools.2011.08.019.
  32. Rajnish Kumar, S. K. Choudhury - "Prevention of Wire Breakage in Wire EDM" International Journal of Machining and Machinability of Materials, Vol.9, Nos.1/2, pp. 86-102, 2011.
  33. Majumdar, R., Kalra, M. S., Multi-group fusion reactivites for Maxwellian and non-Maxwellian ion velocity distributions (2011) Canadian Nuclear Society - 32nd Annual Conference of the Canadian Nuclear Society and 35th CNS/Can Student Conference 2011, 1, pp. 95-106.
  34. Trivedi, A. K., Srivastava, A., Lele, H. G., Munshi, P., Kalra, M. S., Uncertainty analysis of large break LOCA foe a pressurized heavy water reactor (2011) Transactions of the American Nuclear Society, 104, pp. 1054-1055.
  35. Tewari, P., Vinod, G., Sanyasi Rao, V. V. S., Munshi, P., Kalra, M. S., Uncertainty evaluation of blackout initiated accident sequences of a typical PHWR (2011) Nuclear Engineering and Design, 241 (12), pp. 5251-5262.
  36. Srivastava, A. K., Ahmad, A. B., Kalra, M. S., Estimation of nusselt number and the first wall heat extraction capability in self-cooled liquid metal blankets (2011) Canadian Nuclear Society - 32nd Annual Conference of the Canadian Nuclear Society and 35th CNS/Can Student Conference 2011, 1, pp. 190-201.
  37. Srivastav, A. K., Ahmed, A. B., Nath, D., Kalra, M. S., effect of channel wall conductance on the performance character-istics of self-cooled liquid metal fusion reactor blankets (2011) Proceeding of GLOBAL-2011, Mukuhari, Japan, Paper no. 390818.
  38. Jain, N., Raj, A., Kalra, M. S., Munshi, P., Ravindran, V. R., Mart algorithms for circular and helical cone-beam tomography (2011) Research in Nondestructive Evaluation, 22 (3), pp. 147-168.
  39. Jain, N., Kalra, M. S., Munshi, P., Characteristic signature of specimen using an approximate formula for 3D circular cone-beam tomography (2011) Research in Nondestructive Evaluation, 22 (3), pp. 169-195.
  40. M. Das, A. Sidpara, V. K. Jain, P. S. Ghoshdastidar, "Parametric Analysis of MR Polishing Fluid using Statistical Tech-nique", Int. J. Precision Technology, Vol.2, No.1, pp.51-63, 2011.
  41. Manas Das, V. K. Jain, P. S. Ghoshdastidar, "Investigations into Out-of-Roundness of the Internal Surfaces of Stainless Steel Tubes Finished by R-MRAFF Process", Journal of Materials and Manufacturing Processes, Vol.26, pp.1073-1084, 2011.
  42. I. Chakraborty, G. Biswas, P. S. Ghoshdastidar, "Bubble Generation in Quiescent and Co-flowing Liquids", International Journal of Heat and Mass Transfer, Vol.54, pp. 4673-4688, 2011.
  43. Gohil, T. B., Saha, A. K., Muralidhar, K., "Direct Numerical Simulation of Naturally Evolving Free Circular Jet", ASME J. Fluids Engg., Vol. 133, Article No. 111203, 2011 (11 pages).
  44. Arora, P., Saha, A. K., "Three-Dimensional Numerical Study of Flow and Species Transport in an Elevated Jet in Crossflow", Int J. Heat Mass Transfer, Vol. 54, pp. 92-105, 2011.
  45. Moharana M. K., Agarwal G. and Khandekar S., Axial Conduction in Single-phase Simultaneously Developing Flow in a Rectangular Mini-channel Array, International Journal of Thermal Sciences, Vol. 50, pp. 1001-1012, 2011.
  46. Hemadri V. A., Gupta A., Khandekar S., Thermal Radiators with Embedded Pulsating Heat Pipes: Infra-red Ther-mography and Simulations, Applied Thermal Engineering, Vol. 31, pp. 1332-1346, 2011.
  47. Moharana M. K., Peela N. R., Khandekar S. and Kunzru D., Distributed Hydrogen Production from Ethanol in a Microfuel Processor: Issues and Challenges, Renewable and Sustainable Energy Reviews, Vol. 15, pp. 524-533, 2011.
  48. Sikarwar B., Battoo N. K., Khandekar S. and Muralidhar K., Dropwise Condensation underneath Chemically Textured Surfaces: Simulation and Experiments, ASME Journal of Heat Transfer, Vol. 133, Issue 2, pp. 021501 (1-15), 2011.
  49. R. K. Maurya, A. K. Agarwal, "effect of Start of Injection on the Particulate Emitted by Methanol Fuelled HCCI Engine", SAE International Journal of Fuels and Lubricants, Volume 4, Issue 2, December 2011, pp 204-222.
  50. D. K. Srivastava, A. K. Agarwal, Tarun Gupta, "effect of Engine Load on Size and Number Distribution of Particulate Matter Emitted from a Direct Injection Compression Ignition Engine" Aerosol and Air Quality Research, Vol. 11, No. 7, pp 915–920, December 2011.
  51. A. K. Agarwal, Sandeep Kumar Goyal, D. K. Srivastava, "Time Resolved Numerical Modeling of Oil Jet Cooling of a Medium Duty Diesel Engine Piston", International Communications in Heat and Mass Transfer, Volume 38, pp. 1080–1085, October 2011.
  52. Deepak Agarwal, Shrawan Kumar Singh, A. K. Agarwal, "effect of Exhaust Gas Recirculation (EGR) on Performance, Emissions, Deposits and Durability of a constant Speed Compression Ignition Engine" Applied Energy, Vol. 88, pp 2900-2907, August 2011.
  53. Deepak Khurana, A. K. Agarwal, "Oxidation Stability, Engine Performance and Emissions Investigations of Karanja, Neem and Jatropha Biodiesel and Blends", SAE 2011-01-0617, SAE Special Publication 2011 and SAE International Journal of Fuels and Lubricants, pp 76-83, June 2011.
  54. R. K. Maurya, A. K. Agarwal, "Experimental Study of Combustion and Emission Characteristics of Ethanol Fuelled Port Injected Homogeneous Charge Compression Ignition (HCCI) Combustion Engine", Applied Energy, Vol. 88, pp 1169-1180, April 2011.
  55. R. K. Maurya, A. K. Agarwal, "Experimental investigation on the effect of intake air temperature and air-fuel ratio on cycle-to-cycle variations of HCCI combustion and performance parameters" Applied Energy, Vol. 88, pp 1153-1163, April 2011.
  56. A. K. Agarwal, Atul Dhar, "Performance, Emissions and Combustion Characterization of Biodiesel in a Generator Engine", International Energy Journal, Volume 12, Issue 1, pp 105-114, March 2011.
  57. R. K. Maurya, D. K. Srivastava, A. K. Agarwal, "Experimental Investigations of Particulate Emitted by an Alcohol Fuelled HCCI/ CAI Combustion Engine", International Energy Journal, Volume 12, Issue 1, pp 29-38, March 2011.
  58. Tarun Gupta, Neelabh Dixit, A. K. Agarwal, "The Secondary Organic Carbon (SOC) Formation from a CRDI Auto-motive Diesel Engine Exhaust", SAE 2011-01-0642, SAE Special Publication 2011.
  59. R. K. Maurya, A. K. Agarwal, "Experimental Investigation on Intake Air Temperature and Air-Fuel Ratio Dependence of Random and Deterministic Cyclic Variability in a Homogeneous Charge Compression Ignition Engine", SAE 2011-01-1183, SAE Special Publication 2011 (SP-2312).
  60. T.T. Kivevele, Avinash K. Agarwal, Tarun Gupta, M..M. Mbarawa, "Oxidation Stability of Biodiesel Produced from Non-Edible Oils of African Origin", SAE 2011-01-1202, SAE Special Publication 2011 (SAE COLL-TP-00160).
  61. Jitendra Gangwar, Tarun Gupta, Sudhir Gupta, A. K. Agarwal, "Emissions from diesel versus biodiesel fuel used in a CRDI SUV engine: PM mass and chemical composition" Inhalation Toxicology, Vol. 23(8), pp 449-458, 2011.
  62. D. K. Srivastava, Kewal Dharamshi, A. K. Agarwal, "Flame Kernel Characterization of Laser Ignition of Natural Gas - Air Mixture in a Constant Volume Combustion Chamber", Optics and Lasers in Engineering, Vol. 49, pp 1201-1209, 2011.
  63. A. K. Agarwal, Tarun Gupta, Abhishek Kothari, "Particulate Emissions from Biodiesel Vs Diesel Fuelled Compression Ignition Engine", "Renewable and Sustainable Energy Reviews", Vol. 15, pp 3278-3300, 2011.
  64. Trushar Gohil, A. K. Saha, and K. Muralidhar, Direct numerical simulation of a naturally evolving free circular jet, ASME J. Fluids Engineering, Vol. 133, pp. 111203-1 to 111203-11 (2011).
  65. Sunil Verma and K. Muralidhar, Determination of forced convection parameters by interferometric imaging of the concentration field during growth of KDP crystals, Optics and Lasers in Engineering, Vol. 49(7), pp. 915-923, (2011).
  66. Basant Sikarwar, N. K. Battoo, S. Khandekar, and K. Muralidhar, Dropwise Condensation underneath Chemically Textured Surfaces: Simulation and Experiments, ASME Journal of Heat Transfer, Vol. 133, pp. 021501-1 to 21501-15 (2011).
  67. S. Mahesh, K. C. Alur and M. D. Mathew. A creep model for austenitic stainless steels incorporating cavitation and wedge cracking. Modelling and simulation in materials science and engineering, 2011. 19(1):015005.
  68. M. Arul Kumar, S. Mahesh and V. Parameswaran. A 'stack' model of rate-independent polycrystals. International Journal of Plasticity, 2011. 27:962-981.
  69. Saha, A., and Wahi, P., 2011, "Delayed feedback for controlling the nature of bifurcations in friction-induced vibrations", Journal of Sound and Vibration, 330(25), pp. 6070-6087.
  70. Kalmar-Nagy, T., Wahi, P., and Haldar, A., 2011, "Dynamics of a hysteretic relay oscillator with periodic forcing", SIAM Journal on Applied Dynamical Systems, 10(2).
  71. Paul, S., Wahi, P., and Verma, M. K., 2011, "Bifurcations and chaos in large-Prandtl number Rayleigh B'enard con-vection", International Journal of Non-Linear Mechanics, 46(5), pp. 772-781.
  72. *Paul, S., Pal, P., Wahi, P., and Verma, M. K., 2011, "Dynamics of zero-Prandtl number convection near onset", Chaos, 21(5), 023118 (1-14.
  73. *Wahi, P., and Kumawat, V., 2011, "Nonlinear stability analysis of a reduced order model of nuclear reactors: a parametric study relevant to the Advanced Heavy Water Reactor", Nuclear Engineering and Design, 241, pp. 134-143.
  74. Virtual modeling of an ankle foot orthosis for correction of foot abnormality, Robotics and Computer-Integrated Man-ufacturing 27 (2011) 257-260, Manak Lal Jain, Sanjay Govind Dhande, Nalinaksh S. Vyas, 2011.
  75. Feature Extraction based on Image Moments of Wavelet Transforms for Fault Diagnosis in Rotating Machinery', Proc. 24th International Congress on Condition Monitoring and Diagnostics Engineering Management (COMADEM), page 995-1010, Styavanger, Norway, May 30-June 01, 2011, A. Saxena and N.S.Vyas, 2011.
  76. Life Estimation in Turbomachinery Blading' Plenary Keynote Paper, Eighth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies CM2011 / MFPT2011, Cardiff, UK, May 20 – 22, 2011, N. S. Vyas.
  77. S. Narendar, S. S. Gupta and S. Gopalakrishnan, 2011, Wave propagation in single-walled carbon nanotube in longitu-dinal magnetic field using nonlocal Euler-Bernoulli beam theory, Applied Mathematical Modelling, (In Press).
  78. S. Narendar, S. S. Gupta and S. Gopalakrishnan, 2011, Longitudinal magnetic field effect on nonlocal ultrasonic vibration analysis of single-walled carbon nanotubes based on wave propagation approach, Advanced Science Letters, Vol. 4, 3382-3389.
  79. Baumgart, T., Capraro, B. C., Zhu, C., and Das, S. L.: Thermodynamics and mechanics of membrane curvature generation and sensing by proteins and lipids. Annual Reviews in Physical Chemistry 22, 483, 2011.
  80. Prabhat Agnihotri, Sumit Basu, K. K. Kar 2011 effect of carbon nanotube length and density on the properties of carbon nanotube-coated carbon fiber/polyester composites Carbon, v49 (9), pp. 3098-3106.
  81. A New Shape Memory Alloy based Smart Encoder for Sensing of Direction and Angular Motion, Sensors and Trans- ducers, Vol. 4, No. 127, pp.45- 56, 2011; B. Bhattacharya and O. P. Patel
  82. Inspection of Pipe Inner Surface using Advanced Pipe Crawler Robot with PVDF Sensor based Rotating Probe, Sensors and Transducers, Vol. 4, No. 127, 2011, pp.45-56., 2011; V. Agarwal, H. Ogai, K. Nishijima and B. Bhattacharya.
  83. Vibration suppression and damage detection in smart composite laminate using high precision finite element, Proc. SPIE, Vol. 7982, pp. 1-16. 2011; A. Kumar, P. Fleming and B. Bhattacharya
  84. R. K. Jain, S. Datta, S. Majumder, A. Dutta. "Two IPMC fingers based micro gripper for handling". International Journal of Advanced Robotic Systems, vol. 8, no. 1, 2011, pp. 1-9.
  85. Kumar M. Arul, Mahesh Sivasambu, Parameswaran V., A 'stack' Model of Rate-independent Polycrystals, INTERNA-TIONAL JOURNAL OF PLASTICITY, 27 (6): 962-981, JUN 2011
  86. Preparation and characterization of nickel coated carbon fiber reinforced polycarbonate composites Satyaprakash Kush-waha, Kamal K. Kar, S. K. Sharma, and S. K. Nayak J. of Reinforced Plastics and Composites, Polymer Composites, ISSN: 0731-6844, Vol:30, No.14, pp:1185-1196, Year: 2011, Sage Publications Ltd.
  87. Title: "effect of carbon nanotube length and density on the properties of carbon nanotube-coated carbon fiber/polyester composites" P. Agnihotri, S. Basu, and Kamal K. Kar Carbon, ISSN: 0008-6223, Vol. 49(9), pp. 3098-3106, Year: 2011, Elsevier Ltd.
  88. Effects of graphite filler loading and heat treatment temperature on the properties of phenolic resin based carbon-carbon composites" N. L. Ravikumar, Kamal K. Kar, D. Sathiyamoorthy Polymer Composites, Vol 32(3), pp 353-361, ISSN: 0272-8397, John Wiley & Sons, Inc.
  89. Synthesis of carbon nanofibers on hydroxyapatite by flame deposition" Sumit Pramanik and Kamal K. Kar Fullerenes, Nanotubes, and Carbon Nanostructures, ISSN: 1536-383X, Vol. 19(7) pp 605-616, Year: 2011, Taylor & Francis, Inc.
  90. Effect of coating time and temperature on electroless deposition of cobalt-phosphorous for the growth of carbon nan-otubes on the surface of E-glass fibers/fabric" Ariful Rahman and Kamal K. Kar Fullerenes, Nanotubes, and Carbon Nanostructures, ISSN: 1536-383X Vol 19(5), pp 373-397, Year: 2011, Taylor & Francis, Inc.
  91. Numerical simulation of the degradation behavior of the phenolic resin matrix during the production of carbon/carbon composites" N. L. Ravikumar,Kamal K. Kar , C. Pandya and D. Sathiyamoorthy Fullerenes, Nanotubes, and Carbon Nanostructures, ISSN: 1536-383X, Vol 19(5), pp 353-372, Year: 2011, Taylor & Francis, Inc.
  92. Effects of graphite filler loading and heat treatment temperature on the properties of phenolic resin based carbon-carbon composites" N. L. Ravikumar, Kamal K. Kar, D. Sathiyamoorthy Polymer Composites, ISSN: 0272-8397, Vol 32(3), pp 353-361, Year: 2011, Society of Plastics Engineers, USA.
  93. Synthesis of carbon nanofibers on hydroxyapatite by flame deposition" Sumit Pramanik and Kamal K. Kar Fullerenes, Nanotubes, and Carbon Nanostructures, ISSN: 1536-383X, Vol 19(7) pp 605-616, Year:2011, Publisher: Taylor & Francis, Inc.
  94. An analytical approach for the prediction of forming limit curves under bilinear paths, International Journal of Me-chanical Sciences, 53, 365-373, 2011 (with U. N. S. Rohith and N. V. Reddy).
  95. Ductile fracture simulation in the Taylor rod impact test using continuum damage mechanics, International Journal of Damage Mechanics, 20(3), 348-369, 2011 (with S.S. Gautam and Raman Babu).
  96. Numerical analysis of damage in deep drawing process, Finite Elements in Analysis and Design, 47(9), 1104-1117, 2011 (with R. K. Saxena).
  97. Saxena, A., 2011, "Topology Optimization with Negative Masks using Gradient Search," Structural and Multidisci-plinary Optimization, 44 (5), pp. 629-649.
  98. Sujit K. V. N., Saxena, A., Rai, A., Reddy, B. V. S. Nagendra, 2011, "How to Choose from a Synthesized Set of Path-Generating Mechanisms," ASME Journal of Mechanical Design, 133(9)
  99. Saxena, A., 2011, "Kempe's Linkages and the Universality Theorem," Resonance, 16 (3), pp. 220-237, DOI: 10.1007/s12045-011-0028-x.
  100. Saxena, A., 2011, "An Adaptive Material Mask Overlay Method: Modifications and Investigations on Binary, Well Connected Robust Compliant Continua," ASME Journal of Mechanical Design, 133 (4), pp. 041004-1-11.
  101. Saxena, A., 2011, "Are Circular Shaped masks Adequate in Adaptive Mask Overlay Topology Synthesis Method," ASME Journal of Mechanical Design, 133(1), pp. 011001-1-11.
  102. (2011) Anurag Gupta, David Steigmann and James S. Stolken. Aspects of phenomenological theory of elastic-plastic deformation. Journal of Elasticity, 104, pp. 249-266.
  103. (2011) David Steigmann and Anurag Gupta. Mechanically equivalent elastic-plastic deformations and the problem of plastic spin. Theoretical and Applied Mechanics, 38(4), pp. 397-417.
  104. Vivek Kumar Mehta and Bhaskar Dasgupta, A general approach for optimal kinematic design of 6-DOF parallel manipulators, Sadhana Vol. 36 No. 6, 977-994 (2011).
  105. S. Sarkar, A. Dalal and G. Biswas, Unsteady wake dynamics and heat transfer in forced and mixed convection past a circular cylinder in cross flow for high Prandtl numbers, International Journal of Heat and Mass Transfer, Vol. 54, pp. 3536–3551 (2011).
  106. D. Chatterjee and G. Biswas, The effects of Reynolds and Prandtl Numbers on Flow and Heat Transfer Across Tandem Square Cylinders in the Steady Flow Regime, Numerical Heat Transfer, Part A, Vol. 59, pp. 421–437, (2011).
  107. A. Patra, D. Bandyopadhyay, G. Tomar, A. Sharma, and G. Biswas, Instability and dewetting of ultrathin solid viscoelastic films on homogeneous and heterogeneous substrates, The Journal of Chemical Physics, Vol. 134, 064705-1 - 064705-11, (2011).
  108. I. Chakraborty, G. Biswas, and P. S. Ghoshdastidar, Bubble generation in quiescent and co-flowing liquids, International Journal of Heat and Mass Transfer , Vol. 54, pp. 4673 – 4688, (2011).
  109. S. Sen, S. Mittal, and G. Biswas, Flow past a Square Cylinder at Low Reynolds Numbers, International Journal for Numerical Methods in Fluids, Vol. 67, pp. 1160–1174, (2011).
  110. B. Ray, P. D. S. Reddy, D. Bandyopadhyay, A. Sharma, S. Qian and G. Biswas, Surface Instability of a Thin Electrolyte Film Undergoing Coupled Electroosmotic and Electrophoretic Flows in a Microfluidic Channel, Electrophoresis, Vol. 32, pp. 3257 - 3267, (2011).
2010
  1. Shantanu Bhattacharya, R. K. Singh, Swarnasri Mandal, Sangho Bok, Venumadhav Korampally, Keshab Gangopadhyay, Shubhra Gangopadhyay, "Plasma modification of polymer surfaces and their utility in building Biomedical microdevices. (Invited Review)", Journal of Adhesion Science and Technology, Volume 24, 15-16, 2707-2739(33), 2010.
  2. Rahul Chaudhury, R. K. Singh, Anil B. Ghubade, Swarnasri Mandal, Shantanu Bhattacharya, "Bilayered staggered Herringbone micromixers with Symmetric and Asymetric geometries.", Microfluidics nanofluidics, Vol. 4, 419-425, 2010.
  3. L. Y. Jonathan, V. Harikumar, N. Satyanarayana, S. K. Sinha, Localized lubrication of micromachines: a feasibility study on Si in reciprocating sliding with PFPE as the lubricant, WEAR, 270 (2010) 19-31.
  4. H.Yu, G. Zhou, S. K. Sinha and F. S. Chau., Scanning grating based inplane movement sensing,Journal of Micromechanics and Microengineering, Vol. 20 (2010) 085007.
  5. Abdul Samad M. and S. K. Sinha, Nanocomposite UHMWPE-CNT polymer coatings for boundary lubrication on aluminium substrates, Tribology Letters, Vol. 38 (2010) 301-311.
  6. Y. Hongbin, Z. Guangya, S. K. Sinha, F. S. Chau and S. Wang, Lens integrated with self aligned variable aperture using pneumatic actuation method, Sensors & Actuators A: Physical, Vol. 159, Issue 1 (2010) 105-110.
  7. Myo Minn and S. K. Sinha, Tribology of ultra high molecular weight polyethylene film on Si substrate with chromium nitride, titanium nitride and diamond like carbon as intermediate layers, Thin Solid Films, Vol. 518, Issue 14 (2010) 3830-3836.
  8. Myo Minn and S. K. Sinha, The frictional behavior of UHMWPE films with different surface energies at low normal loads, WEAR, Vol.268 (2010) 1030-1036.
  9. T. S. Kustandi, J. H. Choo, H. Y. Low and S. K. Sinha, Texturing of UHMWPE Surface via NIL for Low Friction and Wear Properties, J. of Physics D: Applied Physics, Vol. 43 (2010) 015301.
  10. Abdul Samad. M., Nalam Satyanarayana and S. K. Sinha, effect of Air plasma pre treatment of Si substrate on adhesion strength and tribological properties of a UHMWPE film, Journal of Adhesion Science & Technology, Volume 24, Number 15-16 (2010) 2557-2570.
  11. Abdul Samad M, Satyanarayana Nalam and S. K. Sinha, Tribology of UHMWPE film on air-plasma treated tool steel and the effect of PFPE overcoat, Surface & Coatings Technology, Vol. 204, Issue 9-10 (2010) Pages 1330-1338.
  12. S. K. Sinha, R. Pang and X. Tang, Application of micro-ball bearing on Si for high rolling life-cycle, Tribology Inter-national, 43 (2010) 178-187.
  13. V. K. Jain, P. Ranjan, V. K.Suri, R. Komanduri, (2010) Chemo-Mechanical Magneto-Rheological Finishing (CMMRF) of Silicon for Microelectronics Applications, CIRP Annals-Manufacturing Technology, 59,323-328.
  14. Mamilla Ravi Sankar, V. K. Jain and J. Ramkumar, "Rotational abrasive flow finishing (R-AFF) process and its effects on finished surface topography", International journal of machine tools and Manufacture, Volume 50, Issue 7, July 2010, Pages 637-650.
  15. M. Ravi Sankar, V. K. Jain, J. Ramkumar, Kamal K. Kar, "Rheological characterization and performance evaluation of a new medium developed for abrasive flow finishing", International Journal of Precision Technology 2010 - Vol. 1, No.3/4, Pages.302-313
  16. Manas Das, V. K. Jain, and P. S. Ghoshdastidar, Nano-finishing of stainless steel tubes using R-MRAFF Process, Ma-chining Science and Technology an International Journal, Vol. 14, No. 3, pp.365-389, 2010.
  17. Manas Das, Ajay Sidpara, V. K. Jain, P. S. Ghoshdastidar, Parametric analysis of MR polishing fluid using statistical technique, Int. J. Precision Technology, Vol. 2, No. 1, pp.51-63, 2010.
  18. S. K. Thandra, S. K. Choudhury - "effect of Cutting Parameters on Cutting Force, Surface Finish and Tool Wear in Hot Machining" International Journal of Machining and Machinability of Materials, Vol.7, Nos.3/4, pp.278-291, 2010.
  19. Park, S., Sinha, N. and Hamad-Schifferli, K., effective size and zeta-potential of nanorods by Ferguson analysis, Langmuir, vol. 26, no. 16, pp. 13071-13075, 2010.
  20. Choudhary, A. K., Kalra, M. S., Sharma, S., Convective heat transfer in MHD flows in fusion reactor blankets (2010) Transactions of the American Nuclear Society, 102, pp. 671-673.
  21. Manas Das, V. K. Jain, P. S. Ghoshdastidar, "Nano-finishing of Stainless-Steel Tubes Using R-MRAFF Process", Machin-ing Science and Technology, Vol.14, No.3, pp.365-389, 2010.
  22. Gohil, T. B., Saha, A. K., Muralidhar, K., "Control of Flow in Forced Jets: a Comparison of Round and Square Cross-sections", Journal of Visualisation, Vol. 13, pp. 141-149, 2010.
  23. Khandekar S., Silwal V., Bhatnagar A. and Sharma P., Global effectiveness of Pulsating Heat Pipe Heat Exchangers: Modeling and Experiments, Heat Pipe Science and Technology - An International Journal, Vol. 1, Issue 3, pp. 279-302, 2010.
  24. Khandekar S., Panigrahi P. K., Lefèvre F. and Bonjour J., Local Hydrodynamics of Flow in a Pulsating Heat Pipe: A Review, Frontiers in Heat Pipes, Vol. 1, pp. 023003(1-20), 2010.
  25. Das S. P., Nikolayev V. S., Lefevre F., Pottier B., Khandekar S. and Bonjour J., Thermally Induced Two-phase Oscillating Flow Inside a Capillary Tube, International Journal of Heat and Mass Transfer, Vol. 53, pp. 3905-3913, 2010.
  26. Sudipto Sarkar and S. Sarkar, 2010, Simulation of vortex dynamics in a cylinder wake by the Immersed Boundary technique, Progress in Computational Fluid Dynamics, Vol. 10, No. 3, pp. 129-145.
  27. S. Sarkar and Sudipto Sarkar, 2010, Vortex dynamics of a cylinder wake in proximity of a wall, Journal of Fluids and Structures, Vol. 26, pp. 19-40.
  28. Khandekar, S., Panigrahi, P. K., Lefevre F. and Bonjour, J. "Local hydrodynamics of flow in a pulsating heat pipes, 1 Frontiers in Heat Pipes,1, 023003(1-20), (2010).
  29. Qayoum Adnan, Gupta Vaibhav, Panigrahi P. K. and Muralidhar K. "Perturbation of a Laminar Boundar-Layer by a Synthetic Jet for Heat Transfer Enhancement", International Journal of Heat and Mass Transfer, Vol. 53, pp. 5035-5057 (2010).
  30. Qayoum Adnan, Gupta Vaibhav, Panigrahi P. K. and Muralidhar K. "Influence of amplitude modulation on piezoelectric synthetic jet actuator", Sensors & Actuators: A. Physical,Vol. 162, 36-50 (2010).
  31. Kakade A., Singh S. K., Panigrahi P. K. and Muralidhar K. "Schlieren investigation of the square cylinder wake: Joint influence of buoyancy and orientation", Physics of Fluids, 22, 054107, pp. 1-18 (2010).
  32. Singh Dhananjay and Panigrahi P. K. "Improved digital holographic reconstruction algorithm for depth error reduction and elimination of out-of-focus particles", Optics Express, Vol. 18, Iss 3, pp. 2426 -2448 (2010).
  33. Gupta A. S., Panigrahi P. K., Muralidhar K. and Gupta Rajive "Color schlierendeflectometry for characterization of crystal growth processes: KDP and Lysozyme", Journal of Crystal Growth, Vol. 312, pp. 817-830 (2010).
  34. A. K. Agarwal, Tarun Gupta, Abhishek Kothari, "Toxic Potential Evaluation of Particulate Matter Emitted from a Constant Speed Compression Ignition Engine: A Comparison between Straight Vegetable Oil and Mineral Diesel", Aerosol Science and Technology, Volume 44, Issue 9, pp 724-733, 2010.
  35. Tarun Gupta, Abhishek Kothari, D. K. Srivastava, A. K. Agarwal, "Measurement of Number and Size Distribution of Particles Emitted from a Mid-Sized Transportation Multipoint Port Fuel Injection Gasoline Engine", Fuel, Volume 89, Issue 9, pp 2230-33, September 2010.
  36. A. K. Agarwal, Atul Dhar, "Comparative Performance, Emission and Combustion Characteristics of Rice-bran Oil and Its Biodiesel in a Transportation Diesel Engine", Journal of Engineering for Gas Turbine and Power, Transactions of ASME, Volume 132, Issue 6, pp 064503-1-4, June 2010.
  37. A. K. Agarwal, Atul Dhar, "Experimental Investigations of Preheated Jatropha Oil Fuelled Direct Injection Compression Ignition Engine: Part-I, Performance, Emission and Combustion Characteristics" Journal of ASTM International, Volume 7, Issue 6, pp 1-13, June 2010.
  38. A. K. Agarwal, Atul Dhar, "Experimental Investigations of Preheated Jatropha Oil Fuelled Direct Injection Compression Ignition Engine: Part-II, Engine Durability and effect on Lubricating Oil" Journal of ASTM International, Volume 7, Issue 2, pp 46-60, February 2010.
  39. Rajveer Singh Rathore, D. K. Srivastava, A. K. Agarwal, Nishith Verma, "Development of Surface Functionalized Acti-vated Carbon Fiber for Control of NO and Particulate Matter", Journal of Hazardous Materials, Volume 173, Issues 1-3, pp 211-222, 2010.
  40. A. K. Agarwal, Atul Dhar, "Karanja Oil Utilization in DI Engine by Preheating: Experimental Investigations of Engine Performance, Emissions and Combustion Characteristics, Part 1", Journal of Automobile Engineering, Proceedings of IMechE, Part-D, Volume 224, Number 1, pp 73-84, 2010.
  41. A.K. Agarwal, Atul Dhar, “Karanja Oil Utilization in DI Engine by Preheating: Experimental Investigations of Engine Durability and Lubricating Oil Properties Part 2”, Journal of Automobile Engineering, Proceedings of IMechE, Part-D, Volume 224, Number 1, pp 85-97, 2010.
  42. Anand K.A., Anisia K.S., Agarwal A.K. , Kumar A., “Hydrogenolysis of Glycerol with FeCo Macrocyclic Complex Bonded to Raney Nickel Support under Mild Reaction Conditions”, Canadian Journal of Chemical Engineering, Volume 88, Issue 2, April 2010, Pages 208-216.
  43. A. A. Kakade, S. K. Singh, P. K. Panigrahi, and K. Muralidhar, “Schlieren investigation of the square cylinder wake:Joint influence of buoyancy and orientation”, Physics of Fluids, Vol. 22(5), 054107-1 to -18, (2010).
  44. Adnan Qayoum, Vaibhav Gupta, P.K. Panigrahi and K. Muralidhar, “Perturbation of a laminar boundary-layer by asynthetic jet for heat transfer enhancement”, International Journal of Heat and Mass Transfer, pp. 5035-5057, Vol. 53,(2010).
  45. Adnan Qayoum, V. Gupta, P.K. Panigrahi, and K. Muralidhar, “Influence of amplitude and frequency modulation on flow created by a synthetic jet actuator”, Sensors and Actuators: A (Physical), Vol. 162, pp. 36-50 (2010).
  46. Trushar Gohil, A.K. Saha, and K. Muralidhar, “ Control of Flow in Forced Jets: a Comparison of Round and Square Cross-sections”, Vol. 13(2), pp. 141-149, Journal of Visualization (2010).
  47. Anamika S. Gupta, P.K. Panigrahi, and K. Muralidhar, “Color schlieren deflectometry for characterization of crystal growth processes: KDP and protein crystals”, Journal of Crystal Growth, Vol. 312, pp. 817-830 (2010).
  48. S. Mahesh, “ A binary tree based model for rate-independent polycrystals”, International Journal of Plasticity, 2010.26(1):42-64.
  49. Subramanian, P., Mariappan, S., Sujith, R. I., and Wahi, P., “Bifurcation analysis of thermoacoustic instabilityin a horizontal Rijke tube”, Journal of Spray and Combustion Dynamics, 2(4) 2010.
  50. Yadav, R., Chandra, M., Verma, M. K., Paul, S., and Wahi, P, “Dynamo transition under Taylor-Green forcing”, Europhysics Letters 2010, 91, pp. 69001(1-6).
  51. Nandakumar, K., Wahi, P., and Chatterjee, A., 2010, “Infinite dimensional slow modulations in a well known delayed model for cutting tool vibrations”, Nonlinear Dynamics, 2010 ,62(4), pp. 705-716.
  52. Insperger, T., Wahi, P., Colombo, A., Stepan, G., Di Bernardo, M., and Hogan, S. J., 2010, “Full characterization of act-and-wait control for first order unstable lag processes with delayed feedback”, Journal of Vibration and Control, 16(7-8), pp. 1209-1233.
  53. Mishra, P. K., Wahi, P., and Verma, M. K., “Patterns and bifurcations in low-Prandtl number Rayleigh-Benardconvection”, Europhysics Letters, 89, 44003, 2010.
  54. Saha, A., Bhattacharya, B., and Wahi, P, “A comparative study on the control of friction-driven oscillations bytime-delayed feedback”, Nonlinear Dynamics, 60(1), pp.15-37 2010.
  55. Chelladurai,V.K.Jain and N.S.Vyas., “Cutting tool condition monitoring system for high speed turning operations”, International Journal of Manufacturing Technology and Management, Vol 21 (2010), 99-111.
  56. H. Chelladurai,V.K.Jain and N.S.Vyas., “ANN based cutting tool condition monitoring system for high-speed turning operations”, International Journal of Machining and Machinability of Materials, (2010) Vol. 8, No.1/2 pp. 87-113.
  57. S. Shukla, R. Gupta, and N.S. Vyas., “Weight Reduction in an Indian Railway CASNUB Bogie Bolster Considering Fatigue Strength”, International Journal of Vehicle Structures and Systems, Vol. 2(3), pp. 102-109, 2010.
  58. S. Shukla, R. Gupta, and N.S. Vyas, “Design Improvements in an Indian Railway Three Piece Freight Bogie Frame Considering Fatigue Strength”, 8th International Conference on Railway Bogies and Running Gears (BOGIE’10) Budapest, Hungary, September 13-16, 2010.
  59. S.Vyas and T.V.K. Gupta, “Technology Development for Application in Indian Railways”, 5th World Congress on Engineering Asset Management WCEAM & AGIC 2010, Brisbane, Australia, 25-27 October 2010, N, 2010.
  60. S. S. Gupta, and R. C. Batra, “Elastic properties and frequencies of free vibrations of single-layer graphene sheets”, Journal of Computational and Theoretical Nanoscience, Vol. 7, 1-14. 2010.
  61. S. S. Gupta, F. G. Bosco, and R. C. Batra, “Wall thickness and elastic moduli of single-walled carbon nanotubes from frequencies of axial, torsional and inextensional modes of vibration”, Computational Materials Science, Vol. 47, 1049-1059, 2010.
  62. Das, S.. “Influence of the bending rigidity and the line tension on the mechanical stability of micropipette aspirated vesicles”, Physical Review E 82, 021908, 2010.
  63. Zhao, Y., Das, S., and Du, Q, “Adhesion of multi-component vesicle membranes”, Physical Review E 81, 041919, 2010.
  64. Sharma, “Equilibrium shapes of rubble-pile binaries: The Darwin ellipsoids for gravitationally held granular aggregates”, Icarus205, 638-654 2010.
  65. Dhiraj K Mahajan and Sumit Basu “On the simulation of uniaxial, compressive behavior of amorphous, glassy polymers with molecular dynamics”, International Journal of Applied Mechanics, v2, n3, pp 515-541
  66. Dhiraj K Mahajan, Rafael Estevez and Sumit Basu, “Ageing and rejuvenation in glassy amorphous polymers”, Journal of the Mechanics and Physics of Solids, v 58, n 10, p 1474-88, Oct. 2010
  67. Dhiraj K Mahajan, Bhupinder Singh and Sumit Basu, “Void nucleation and disentanglement in glassy amorphous polymers”, Physical Review E, v 82, n 1, p 011803 2010.
  68. Siva Prasad AVS, Tarun Grover and Sumit Basu, “Coarse grained molecular dynamics simulation of cross linking of DGEBA epoxy resin and estimation of the adhesive strength”, Int J of Engng Sc and Technology, Special Issue on Computational Mechanics, v2, n4, p17-30 2010.
  69. Parimal Maity, Nandini Gupta, V Parameswaran and Sumit Basu, “ On the Size and Dielectric Properties of the Interphase in Epoxy-Alumina Nanocomposite”, IEEE Transactions on Dielectrics and Electrical Insulation, v 17, n 6, p1665-75 2010.
  70. Prabhat K. Agnihotri and Sumit Basu, “Single walled nanotubes as Kirchoff elasticas”, International Journal of Applied Mechanics, v 2, n 4, p 719-43 2010.
  71. Manoj Krishna Majumder, Ramkumar S, Dhiraj K Mahajan, Sumit Basu, “Coarse-graining scheme for simulating uniaxial stress-strain response of glassy polymers through molecular dynamics”, Physical Review E, v 81 (1), p011803 2010.
  72. Dhiraj Mahajan and Sumit Basu, “ Investigations into the applicability of rubber elastic analogy to hardening in glassy polymers”, Modelling and Simulation in Materials Science and Engineering, v18(2), pp. 025001 2010.
  73. A. Banerjee, B. Bhattacharya, and A.K. Mallik, “Optimum discrete location of a shape memory alloy wire for discrete actuation of a compliant link”, Journal of Mechanical Design , Vol.132, Issue 2, February 2010.
  74. S. Manepalli, Ashish Dutta, AnupamSaxena. “Multi-objective GA based algorithm for 2D form and force closure grasp of prismatic objects”. International Journal of Robotics and Automation,vol. 25, no. 2, 2010, pp. 142-154.
  75. Biswanat Panda, Ashish Dutta. “Design of a Partially Compliant Crank Rocker Mechanism Using Ionic Polymer Metal Composite for Path Generation”, Materials & Design, vol. 31, 2010, pp. 2471-2477.
  76. Swagat Kumar, Premkumar P., Ashish Dutta, L. Behera. “Visual motor control of a 7DOF redundant manipulator using redundancy preserving learning networks”, Robotica,vol. 28, 2010, pp. 795-810.
  77. Maity P, Gupta N, Parameswaran V, Basu S, “On the Size and Dielectric Properties of the Interphase in Epoxy-alumina Nanocomposite”, IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION, 17 (6): 1665-1675,DEC 2010.
  78. Ramana Reddy K, Parameswaran V, Sundaraiah K, Singh RK, Bhasker Rao KU, and Iyengar NGR, “Poly-Ether-Ether-Ketone Composites Reinforced with Alumina Nanoparticles: Processing and Characterization”, JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 29 (18), 2771-2781, SEP 2010
  79. Parameswaran V, Shukla D, “Evaluation of elastic modulus of epoxy reinforced with 200 nm thick alumina platelets through finite element analysis”, MATERIALS SCIENCE AND ENGINEERING A527, 3792-3799, MAY 2010
  80. Sohan Lal R, Prashant Kumar, Singh RK, Parameswaran V, “Dynamic shear strength of adhesive joints made of metallic and composite adherents”, MATERIALS & DESIGN, 31 (14): 2102-09, APRIL 2010.
  81. S.S. Ahankari, and Kamal K. Kar , “Processing and mechanical behavior of carbon black graded rubber compounds” Journal of Applied Polymer Science, ISSN:0021-8995, Vol. 115(6), pp. 3146-3154 Year:2010, John Wiley & Sons, Inc.
  82. Sanjay Agarwal, B. YaminiSarada, Kamal K. Kar, “The fabrication of carbon-nanotube-coated electrodes and a field-emission-based luminescent device” Nanotechnology, ISSN:1361-6528, Vol. 21(6), pp. 065601/1-065601/5, Year:2010, Institute of Physics Publishing .
  83. Deeptangshu Chaudhary, Yu Dong, Kamal K. Kar , “Hydrophilic plasticized biopolymers: Morphological influence on physical properties” Materials Letters, ISSN:0167-577X. Vol. 64(7), pp. 872-875, Year:2010, Elsevier B.V.
  84. Ravisankar, V. K. Jain, J. Ramkumar, and Kamal K. Kar , “Rheological characterization and performance evaluation of a new medium developed for abrasive flow finishing”, International Journal of Precision Technology, Vol. 5(7), pp. 637-650, Year:2010, Inderscience Enterprises Ltd.
  85. S.S. Ahankari, and Kamal K. Kar , “Hysteresis measurements and dynamic mechanical characterization of functionally graded natural rubber-carbon black composites Polymer Engineering and Science”, ISSN:0032-3888, Vol. 50(5), pp.871-877 Year:2010, John Wiley & Sons, Inc.
  86. Ariful Rahman, Kamal K. Kar, and D. Chaudhary, “Synthesis of carbon nanotubes on nickel-silica catalyst coated E-glass fiber/fabric and its nanocomposites” , International Journal of Plastic Technology, ISSN:0972-656X, Vol 14 (1), pp 65-79, Year:2010, Springer.
  87. R. K. Saxena, P. M. Dixit, “ Prediction of flange wrinkling in deep drawing process using bifurcation criterion”, Journal of Manufacturing Processes, 12(1), 19-29, 2010.
  88. S.S. Gautam, P. M. Dixit, “ Ductile failure simulation in spherodized steel using continuum damage mechanics coupled finite element formulation”, International Journal of Computational Methods, 7(2), 319-348, 2010.
  89. R.K. Saxena, S.S. Gautam, P. M. Dixit, “ Numerical simulation of fracture in cup drawing”, International Journal of Material Forming, 3(1), 117-120, 2010.
  90. Mannepalli, S., Dutta, A., Saxena, A., 2010, “A multi-objective GA based algorithm for 2D form and force closure grasp of prismatic objects,” International Journal of Robotics and Automation, 25 (2), DOI: 10.2316/ Journal.206.2010.2.206-3359.
  91. Rai, A.K., Saxena, A., Mankame, N. D., 2010, “Unified synthesis of compact planar path-generating linkages with rigid and deformable members,” Structural and Multidisciplinary Optimization, 41:863–879.
  92. Jain, C. and Saxena, A., 2010, “An Improved Material-mask overlay strategy for Topology Optimization of Structures and Compliant Mechanisms,” ASME Journal of Mechanical Design, 132 (6), 061006-1-10.
  93. Ekta Singla, Suryamani Tripathi, V. Rakesh and Bhaskar Dasgupta, “Dimensional Synthesis of Kinematically Redundant Serial Manipulators for Cluttered Environments”, Robotics and Autonomous Systems, Vol. 58, No. 5, 585-595 (2010).
  94. G. Gandikota, S. Amiroudine, D. Chatterjee and G. Biswas, “The Effect of Aiding/ Opposing Buoyancy on Two-Dimensional Laminar Flow Across a Circular Cylinder”, Numerical Heat Transfer, Part A, Vol. 58, pp. 385-402, (2010).
  95. D. Chatterjee, G. Biswas and S. Amiroudine,” Numerical simulation of flow past row of square cylinders for various separation ratios”, Computers and Fluids, Vol. 39 pp. 49–59, (2010).
  96. S. Sarkar, A. Dalal and G. Biswas, “Mixed Convective Heat Transfer from Two Identical Square Cylinders in Cross Flow at Re=100”, International Journal of Heat and Mass Transfer, Vol. 53, pp. 2628-2642, (2010).
  97. S. Jayavel, S. Tiwari, G. Biswas and M. Sen, “Kinematics of a fluid particle due to interaction of fixed inviscid vortex filaments in presence of external translation and pulsation”, International Journal of Fluid Mechanics Research, Vol. 37, pp.127-148, 2010.
  98. P. Saha and G. Biswas, “Assessment of a Shear-Improved Subgrid Stress Closure for Turbulent Channel Flows”, International Journal of Heat and Mass Transfer, Vol. 53, 4856 – 4863, (2010).
  99. B. Ray, G. Biswas and A. Sharma, “Generation of secondary droplets in coalescence of a drop at a liquid/ liquid interface”, Journal of Fluid Mechanics, Vol. 655, pp. 72-104, (2010).
2009
  1. Ok Kyng Koo, YiShao Liu, Shuaib Salamat, Shantanu Bhattacharya, Michael R. Ladisch, Rashid Bashir and Arun K. Bhunia, "Targeted capture of pathogenic bacteria using a mammalian cell receptor coupled with dielectrophoresis on a biochip", Analytical Chemistry, Vol. 81 (8), pp 3094–3101, 2009.
  2. Anil Ghubade, Swarnasri Mandal, Rahul Chaudhury, Rajeev Kr. Singh and Shantanu Bhattacharya, "Dielectrophoretic Assisted Concentration of Micro-particles and their rapid quantitation based on optical means", Biomedical Microde-vices, Vol. 11 (5),pp. 987-995 2009.
  3. Yuanfang Gao, Shantanu Bhattacharya, Xiaohui Chen, Syed Barizuddin, Shubhra Gangopadhyay, Kevin D. Gillis, "A microfluidic cell trap device for automated measurement of quantal catecholamine release from cells", Lab on chip, Vol. 9, 3442 - 3446, 2009.
  4. A and S. C. Lim, Slider-lubricant interaction and corresponding tribo-current, IEEE Transactions on Magnetics, Vol. 45, No. 11 (2009) 5069-5072.
  5. N. Satyanarayana, S. K. Sinha and S. C. Lim, Highly wear resistant chemisorbed polar-UHMWPE thin film on Si surface for micro-systems application, J. Materials Research, Vol. 24, No. 11 (2009) 3331-3337.
  6. Myo Minn and S. K. Sinha, Molecular orientation, crystallinity, and topographical changes in sliding and their frictional effects for UHMPWE film, Tribology Letters, 34 (2) (2009) 133-140.
  7. S. K. Sinha, Tingwan Song, Xuefei Wan and Yuejin Tong, Scratch and normal hardness characteristics of polyamide 6/Nano-Clay composite, WEAR, Vol. 266 (2009) 814-821.
  8. V. N. Sekhar, T. C. Chai, S. Balakumar, L. Shen, S. K. Sinha, A. A. O. Tay, S. W. Yoon, Influence of thickness on nanomechanical behavior of Black DiamondTM low dielectric thin films for interconnect and packaging applications, Journal of Materials Science: Materials in Electronics, Vol. 20, No. 1 (2009) 74-86.
  9. H. M. Leung and S. K. Sinha, Scratch and indentation tests on seashells, Tribology International, Vol. 42 (2009) 40-49.
  10. V. K. Jain (2009), Magnetic field assisted abrasive based micro-/nano-finishing, Journal of Materials Processiong Tech-nology, 209, 6022-6038.
  11. Mamilla Ravi Sankar, J. Ramkumar and V. K. Jain, "Experimental investigation and mechanism of material removal in nano finishing of MMCs using abrasive flow finishing (AFF) process", Wear, Vol 266, Issue 7-8, (2009), pp 688-698, (doi:10.1016/j.wear.2008.08.017).
  12. Mamilla Ravi Sankar, S. Mondal, J. Ramkumar, V. K. Jain, "Experimental Investigations and Modeling of Drill Bit Guided Abrasive Flow Finishing (DBG-AFF) Process", International journal of Advanced Manufacturing Technology, Vol 42 (2009), Pages 678-688 (doi:10.1007/s00170-008-1642-y).
  13. Mamilla Ravi Sankar, V. K. Jain and J. Ramkumar, "Experimental investigations into rotating workpiece Abrasive flow finishing", Wear, Vol 267, (2009), pp 43-51 (doi:10.1016/j.wear.2008.11.007).
  14. V. K. Jain, Rajani Kumar, P.M. Dixit, and Ajay Sidpara (2009), "Investigations into abrasive flow finishing of complex workpieces using FEM", Wear, Volume 267, Issues 1-4, 15 June 2009, Pages 71-80.
  15. Ajay Sidpara, Manas Das, and V. K. Jain (2009), "Rheological Characterization of Magnetorheological finishing Fluid", Journal of Materials and Manufacturing Processe. Vol. 24, No. 12, pp.1467- 1478, 2009.
  16. V.K. Jain, A., Chavan, A., Kulkarni, 'Analysis of contoured holes produced using STED processes', Int J Adv Manuf Technol (2009), 44, 138-148 ( DOI 10.1007/s00170-008-1821-x).
  17. Sourabh Kumar Saha, S. K. Choudhury - "Experimental Investigation and Empirical Modeling of the Dry Electric Discharge Machining Process" International Journal of Machine Tools and Manufacture, Vol. 49 (3-4), pp.297-308, March 2009.
  18. A. Banerjee, E. V. Bordatchev, S. K. Choudhury - "On-line monitoring of Surface Roughness in turning operations with a bifurcated opto-electrical transducer" International Journal of Manufacturing Research, Vol. 4/1, pp.57-73, 2009
  19. Yadav, S., Kalra, M. S., Munshi, P., Khushu, S., Quantification of MRI images using second level KT-1 signature (2009) Transactions of the American Nuclear Society, 100, pp. 41-42.
  20. I. Chakraborty, B. Ray, G. Biswas, F.Durst, A.Sharma, P. S. Ghoshdastidar, "Computational Investigation on Bubble Detachment from Submerged Orifice in Quiescent Liquid under Normal and Reduced Gravity", Physics of Fluids, Vol. 21, Published online on June 11, 2009.
  21. P. S. Ghoshdastidar and Ankit Agarwal, "Simulation and Optimization of Drying of Wood Chips with Superheated Steam in a Rotary Kiln", ASME Journal of Thermal Science and Engineering Applications, Vol.1, No.2, pp. 024501-1-8, 2009.
  22. Saha, A. K., "effect of Transitions on Flow Past a Square Cylinder at Low Reynolds Number", ASCE J. of Engineering Mechanics, Vol. 135 (8), pp. 839-851, 2009.
  23. Bansal G. D., Khandekar S. and Muralidhar K., Measurement of Heat Transfer during Dropwise Condensation of Water on Polyethylene, Nanoscale and Microscale Thermophysical Engineering, Vol. 13, Issue 3, pp. 184-201, 2009.
  24. Revellin R., Lips S., Khandekar S. and Bonjour J., Local Entropy Generation for Saturated Two-phase Flow, Energy - The International Journal, Vol. 34, Issue 9, pp. 1113-1121, 2009.
  25. Rao M. and Khandekar S., Simultaneously Developing Flows under Conjugate Conditions in a Mini-channel Array: Liquid Crystal Thermography and Computational Simulations, Heat Transfer Engineering Journal, Vol. 30, Issue 10, pp. 751-761, 2009.
  26. Yang H., Khandekar S. and Groll M., Performance Characteristics of Pulsating Heat Pipes as Integral Thermal Spread-ers, International Journal of Thermal Sciences, Vol. 48, Issue 4, pp. 815-824, 2009.
  27. Khandekar S., Gautam A. P. and Sharma P., Multiple Quasi-Steady States in a Closed Loop Pulsating Heat Pipe, International Journal of Thermal Sciences, Vol. 48, Issue 3, pp. 535-546, 2009.
  28. S. Sarkar, 2009, Influence of wake structure on unsteady flow in an LP turbine blade passage, ASME Journal of Turbomachinery, Vol.131, 041016 (14 pages).
  29. S. Sarkar and Sudipto Sarkar, 2009, Large-Eddy Simulation of Wake and Boundary Layer Interactions Behind a Circular Cylinder, ASME J. Fluids Engineering, Vol. 131, 091201 (13 pages).
  30. Panigrahi P. K. "PIV investigation of flow behind surface mounted detached square cylinder", ASME Journal of Fluids Engineering, Vol. 131, pp. 011202-1 to 011202-15 (2009).
  31. A. K. Agarwal, Mritunjaya Kumar Shukla, "Portable Biogas Bottling Plant: A Practical Approach for Using Biogas as Transportation Fuel in Rural Areas", International Journal of Oil, Gas and Coal Technologies, pp 379-388, Vol. 2, No. 4, 2009.
  32. R. K. Maurya, A. K. Agarwal, "Experimental Investigation of effect of Intake Air Temperature and Mixture Quality on Combustion of Methanol and Gasoline Fuelled HCCI Engine", Journal of Automobile Engineering, Proceedings of IMechE, Part-D, Volume 223, Number 11, pp 1445-1458, 2009.
  33. A. K. Agarwal, Tanu Priya Bajaj, "Process Optimisation of Base Catalysed Transesterification of Karanja Oil for Biodiesel Production" International Journal of Oil, Gas and Coal Technologies, Vol. 2, No. 3, 2009, pp 297-310.
  34. Shailendra Sinha, A. K. Agarwal, "Experimental Investigations of the Tribological Properties of Lubricating Oil from Biodiesel Fuelled Medium Duty Transportation CIDI Engine", SAE Paper No. 2008-01-1385, SAE Special Publication SP-2176 (ISBN - 978-0-7680-2018-2), SAE International Journal of Fuels and Lubricants, April 2009 (1), pp 719-730. (Print ISSN - 1946-3952; Online ISSN - 1946-3960).
  35. R. K. Maurya, A. K. Agarwal, "Experimental Investigation of cycle-by-cycle variations in CAI/HCCI combustion of Gasoline and Methanol by varying different engine operating conditions", SAE 2009-01-1345, SAE Special Publication SP-2242, 2009.
  36. A. K. Agarwal, Atul Dhar, "Performance, Emission and Combustion Characteristics of Jatropha Oil Blends in a Direct Injection Engine" SAE 2009-01-0947, SAE Special Publication SP-2239, 2009.
  37. D. K. Srivastava, Martin Weinrotter, Kurt Iskra, A. K. Agarwal, Ernst Wintner, "Characterisation of Laser Ignition in Hydrogen-Air Mixtures in a Combustion Bomb" International Journal of Hydrogen Energy, Volume 34, Issue 5, March 2009, pp 2475-2482.
  38. D. K. Srivastava, Martin Weinrotter, Henrich Kofler, A. K. Agarwal, Ernst Wintner, "Laser-assisted Homogeneous Charge Ignition in a Constant Volume Combustion Chamber" Optics and Lasers in Engineering, Volume 47, 2009, pp 680–685.
  39. Atul Dhar, Vishal Saxena, A. K. Agarwal, "Measurement of Dynamic Lubricating Oil Film Thickness between Piston Ring and Liner in a Motored Engine" Sensors and Actuators, Volume 149, Issue 1, January 2009, pp 7-15.
  40. Shailendra Sinha, A. K. Agarwal, "Rice Bran Oil Methyl Ester Fuelled Medium-Duty Transportation Engine: Long-Term Durability and Combustion Investigations" International Journal of Vehicle Design, Vol. 50, Nos. 1/2/3/4, 2009, pp 248-270.
  41. A. K. Agarwal, K. Rajamanoharan, "Experimental Investigations of Performance and Emissions of Karanja Oil and its Blends in a Single Cylinder Agricultural Diesel Engine", Applied Energy, Vol. 86, No. 1, January 2009, pp 106-112.
  42. Atul Srivastava, Dhruv Singh and K. Muralidhar, Reconstruction of Time-dependent Concentration Gradients around a KDP crystal growing from its Aqueous Solution, Journal of Crystal Growth, Vol. 311, pp. 1166-1177, (2009).
  43. A. P. Singh, A. K. De, V. K. Carpenter, V. Eswaran and K. Muralidhar, Flow past a transversely oscillating square cylinder in free stream at low Reynolds numbers, International Journal for Numerical Methods in Fluids, Vol. 61, pp. 658-682, (2009).
  44. G.D. Bansal, S. Khandekar and K. Muralidhar, Measurement of heat transfer during dropwise condensation of water on polyethylene, Nanoscale and Microscale Thermophysical Engineering Vol. 13(3), pp. 184-201 (2009).
  45. Chanpreet Singh, R. Tathgir and K. Muralidhar, Energy storage in fluid saturated porous media subjected to oscillatory flow, Heat and Mass Transfer/ Waerme-und Stoffuelbertragung, Vol. 45(4), p. 427, (2009).
  46. S. Mahesh. A hierarchical model for rate-dependent polycrystals, International Journal of Plasticity, 2009. 25(5):752-767
  47. Pal, P., Wahi, P., Paul, S., Verma, M. K., Kumar, K., and Mishra, P. K., 2009, "Bifurcation and chaos in zero Prandtl number convection", Europhysics Letters, 87, 54003.
  48. Biomodeling of clubfoot deformity of babies, Rapid Prototyping Journal, Volume 15, Issues 3, pp.164-170, Manak Jain, Sanjay Dhande, Nalinaksh Vyas, (2009).
  49. A biomechanical control mechanism for correction of clubfoot deformity in babies, Int. J. Biomechatronics and Biomed-ical robotic, Vol. 1, No.1, pp. 51-56, Manak Lal Jain, Sanjay Govind Dhande, Nalinaksh S. Vyas, (2009).
  50. Parametric study of suspension Elements for Ride index analysis of an Indian Railway freight Vehicle, International Journal of Vehicle Structures and Systems, Vol. 1(4), pp. 70-77, 2009, S. Shukla, R. Gupta, and N. S. Vyas.
  51. Nonlinear Damping Estimation of Self-Excited System Using Wavelet Transform, IMAC- XXVII, , Orlando, Florida, USA, February 2009. R. Porwal, N. S. Vyas.
  52. Non-Parameteric Identification of Rotor-Bearing System through Volterra-Wiener Theories, Proc., IUTAM Symposium on Emerging Trends in Rotor Dynamics, pp. 309-320, New Delhi, N. S.Vyas and Animesh Chatterjee, 2009.
  53. A study on the effect of process parameters in blind pocket milling using Abrasive Water Jet Machining" 6th Interna-tional Conference on Precision, Meso, Micro and Nano Manufacturing (COPEN6), 11-12 Dec. 2009, PSG College of Engineering, Coimbatore, pp. B28-32, T. V. K. Gupta, J. Ram Kumar, N. S. Vyas.
  54. S. S. Gupta, F. G. Bosco, and R. C. Batra, 2009, Breakdown of structural models for vibrations of single-wall zigzag carbon nanotubes, Journal of Applied Physics, Vol. 106, 063527.
  55. Zhang, J., Das, S. L., and Du, Q.: A phase field model of vesicle substrate adhesion. Journal of Computational Physics 228, 7837, 2009
  56. Das, S. L., Jenkins, J. T., and Baumgart, T.: Neck geometry and shape transitions in vesicles with co-existing fluid phases: Role of Gaussian curvature stiffness versus spontaneous curvature. Europhysics Letters, 86, 48003, 2009.
  57. Sharma, I. 2009. Equilibrium shapes of rubble-pile satellites: The Darwin and Roche ellipsoids for gravitation-ally held granular aggregates. Icarus200, 636-654.
  58. Sharma, I., J. T. Jenkins and J. A. Burns 2009. Dynamical passage to approximate equilibrium shapes for spinning, gravitating rubble asteroids. Icarus200, 304-322.
  59. Bhateja, A., J. K. Singh and I. Sharma, 2009. Axial segregation in horizontally vibrated granular materials: A numerical study. KSCE J. Civil Engg.13, 289-296.
  60. Forward and inverse analyses of smart compliant mechanism for path generation, Mechanism and Machine Theory, 44, 369-381. 2009; A. Banerjee, B. Bhattacharya, and A. K. Mallik.
  61. Multi-objective Optimization of Piezoelectric Actuator Placement for Shape Control of Plates using Genetic Algorithms, Journal of Mechanical Design, Vol. 131, pp. 1-11, 2009 ; R. Kudikala, K. Deb and B. Bhattacharya.
  62. A comparative study on the control of friction-driven oscillations by time-delayed feedback, Journal of Nonlinear Dynamics, DOI 10.1007, 2009; A Saha, B. Bhattacharya and P. Wahi
  63. Analysis of Pilot Valve and Taper Groove Based Damper, Proceedings of I Mech E London Part C, J. Mechanical Engineering Science, Vol. 223 (C4), pp 859-871, 2009; R. M. Bhatnagar, B. Bhattacharya and G. Biswas
  64. Optimum discrete location of a shape memory alloy wire for discrete actuation of a compliant link, Journal of Mechanical Design , 2009; A. Banerjee , B. Bhattacharya, and A. K. Mallik.
  65. Pseudo-rigid Body Modelling of IPMC for a Partially Compliant Four-bar Mechanism for Work-volume generation , Intelligent Material Systems and Structures, Vol. 20, No.1, pp. 51-62, 2009, D. Bandopadhyay, B. Bhattacharya and A. Dutta.
  66. Characterization of IPMC as passive and active damper as an alternative novel smart actuator, Journal of Reinforced Plastics and Composites,Vol. 28 , 2 : pp. 183 - 200, 2009; D. Bandopadhya, B. Bhattacharya and A. Dutta.
  67. D. Bandopadhya, A. Dutta, B. Bhattacharya. "Pseudo-rigid body modeling of IPMC for a partially compliant 4-bar mechanism for work volume generation".Journal of Intelligent Material Systems and Structures,Vol. 20, no. 1, 2009, 51-62.
  68. Tripures Mishra, Prithwijit Guha, Ashish Dutta and K. S. Venkatesh. "Stochastic Re-grasp Planning for Vision Aided Capture of Deforming and Moving Objects".Mechatronics, vol. 19, no.4, 2009, pp.510-519.
  69. Edwin Raj R., Parameswaran V., Daniel BSS, Comparison of quasi-static and dynamic compression behavior of closed-cell aluminum foam, MATERIAL SCIENCE AND ENGINEERING, A526, 11-15, NOV 2009
  70. Maity P, Poovamma P.K., Basu S., Parameswaran V., Gupta N., Dielectric Spectroscopy of Epoxy Resin with and without Nanometric Alumina Fillers, IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION, 16 (5): 1481-88, OCT 2009.
  71. Kommana R., Parameswaran V., Experimental and numerical investigation of a cracked transversely graded plate sub-jected to in plane bending, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 46 (11-12), 2420-2428, JAN 2009
  72. Wadgaonkar S.C., Parameswaran V., Structure of near tip stress field and variation of stress intensity factor for a crack in a transversely graded material, JOURNAL OF APPLIED MECHANICS, 76 (1): 011014, JAN 2009.
  73. A simple method for controlled growth of carbon nanocoils on metallic wire by chemical vapor deposition B. Yamini Sarada, S. Agarwal, and Kamal K. Kar Nanoscience and Nanotechnology Letters, ISSN:1941-4900, Vol. 1(3), pp. 213-217, Year:2009, American Scientific Publishers.
  74. A novel approach to synthesize carbon nanotubes, carbon nanocoils, carbon microcoils on the surface of metallic wire: application in vacuum electronic devices" S. Agarwal, Yamini Sarada B., and Kamal K. Kar Advances in Technology of Materials and Materials Processing Journal, ISSN:1440-0731, Vol.11(2), pp. 49-56, Year:2009, AD-TECH
  75. Polypropylene nanosphere: Particle size and crystal structure Pradip Paik and Kamal K. Kar International Journal of Plastic Technology, ISSN:0972-656X, Vol. 13(1), Year 2009, pp 68-82, Year:2009, Springer.
  76. Preferential media for abrasive flow machining Kamal K. Kar, N. L. Ravikumar, P. B. Tailor, J. Ramkumar and D. Sathiyamoorthy Transations of the ASME, Journal of Manufacturing Science and Engineering, ISSN: 1087-1357, Vol.: 131, pp. 011009-1-011009-1, Year: 2009, ASME.
  77. Performance evaluation and rheological characterization of newly developed butyl rubber based media for abrasive flow machining process" Kamal K. Kar, N. L. Ravikumar, P. B. Tailor, J. Ramkumar and D. Sathiyamoorthy Journal of Materials Processing Technology, ISSN:0924-0136, Vol.: 209 (2009), pp.2212-2221, Year: 2009, Publisher: Elsevier B.V.
  78. Thermal degradation kinetics and estimation of lifetime of polyethylene particles: effects of particle size" Pradip Paik and Kamal K. Kar Materials Chemistry and Physics, ISSN: 0254-0584, Vol.: 113(2-3), pp. 953-961, Year: 2009, Publisher: Elsevier B.V.
  79. Synthesis and characterization of elastic and macroporous chitosan-gelatin cryogels for tissue engineering Neeraj Kathuria, Anuj Tripathi, Kamal K. Kar and Ashok Kumar Actabiomaterialia, ISSN:1878-7568, Vol. 5(1), pp. 406-418, Year: 2009, Publisher: Elsevier
  80. Synthesis of carbon nanotubes on the surface of carbon fiber/fabric by catalytic chemical vapor deposition and their characterization Kamal K. Kar, A. Rahaman, P. Agnihotri, and D. Sathiyamoorthy Fullerenes, Nanotubes, and Carbon Nanostructures, ISSN: 1536-383X, Vol.: 17, pp. 209-229, Year:2009, Publisher: Taylor & Francis, Inc.
  81. Influence of process parameters for coating of nickel-phosphorous carbon fibers Kamal K. Kar and D. Sathiyamoorthy J. of Materials Processing & Technology, ISSN: 0924-0136, Vol:209(6), pp: 3022-3029, Year:2009, Thomson Scientific
  82. Investigations into abrasive flow finishing of complex workpieces using FEM, Wear 267, 71-80, 2009 (with V. K. Jain, Rajani Kumar and Ajay Sidpara).
  83. Finite element simulation of earing deffect in deep drawing, International Journal of Advanced Manufacturing Technology, 45(3), 219-233, 2009 (with R. K. Saxena).
  84. Saxena, R. and Saxena, A., 2009, "Design of Electro-Thermally Compliant MEMS with Hexagonal Cells using Local Temperature and Stress Constraints," ASME Journal of Mechanical Design, Volume 131, Issue 5, 051006 (10 pages), doi:10.1115/1.3087544.
  85. Khan, H., Sinha, P., Saxena, A., 2009, "A Simple Algorithm for Thermo Elasto hydrodynamic Lubrication Problems," International Journal of Research and Reviews in Applied Sciences, Volume 1, Issue 3 (December, 2009), 265-279.
  86. Hari K. Voruganti and Bhaskar Dasgupta, "A Geometric Approach for Segmentation and Parameterization of Molecular Surfaces for Docking", International Journal of Computational Science, Vol. 3 No. 2, 178-196 (2009).
  87. Bhaskar Dasgupta, Akhil Gupta and Ekta Singla, "A Variational Approach to Path Planning for Hyper-Redundant Manipulators", Robotics and Autonomous Systems, Vol. 57 No. 2, 194-201 (2009).
  88. S. Sen, S. Mittal and G. Biswas, Steady Separated Flow Past a Circular Cylinder at Low Reynolds Numbers, Journal of Fluid Mechanics, Vol. 620, pp. 89-119, (2009).
  89. R. M. Bhatnagar, B. Bhattacharya and G. Biswas, Analysis of Pilot Valve and Taper Groove Based Damper, Proceedings of I Mech E London Part C, J. Mechanical Engineering Science, Vol. 223 (C4), pp 859-871, (2009).
  90. G. Biswas and S. Sarkar, effect of Thermal Buoyancy on Vortex Shedding Past a Circular Cylinder in Cross Flow at Low Reynolds Numbers, International Journal of Heat and Mass Transfer, Vol. 52, pp. 1897-1912, (2009).
  91. G. Tomar, G. Biswas, A. Sharma and S.W. J. Welch, Influence of Electric Field on Saturated Film Boiling, Physics of Fluids, Vol. 21, 032107-1 – 032107-8 (2009).
  92. I. Chakraborty, B. Ray, G. Biswas, F. Durst, A. Sharma, and P. S. Ghoshdastidar, Computational Investigation on Bubble Detachment from Submerged Orifice in Quiescent Liquid under Normal and Reduced Gravity, Physics of Fluids, Vol. 21, pp. 062103-1 – 062103-17, (2009).
  93. D. Chatterjee, G. Biswas and S. Amiroudine, Numerical Investigation of Forced Convection Heat Transfer in Unsteady Flow Past a Row of Square Cylinders, International Journal of Heat and Fluid Flow, Vol. 30 pp. 1114–1128, (2009).